Ruggerini/ ACME - BG76 Italia - Page 2

Cell. : +39 380 7439434

PIASTRA IN PLASTICA PORTALAME FALCIATRICE ad. BCS INTERASSE 63mm

BOBINA INTERNA ad. VOLPI E BOTOLI COTIEMME 180 INTERASSE 46mm

GAS HANDLE WITH LEFT SCREW

GAS HANDLE WITH RIGHT SCREW

GAS HANDLE WITH RIGHT SCREW CLAMP

GAS HANDLE WITH RIGHT SCREW ON - OFF

Technical Articles

POMOLO CARBURATORE DELL'ORTO FMCD 201.16

SEEGER PER INTERNO D=82X2,50mm CONFEZIONE DA 10 PEZZI

COPERCHIO FRESA ad. SEP 140

COPERCHIO FRESA ad. SEP 125

PERNO SCANALATO 6 CAVE PROFILO 1" 3/8 L=120mm

TRASMISSIONE COMPLETA FRIZIONI PER DECESPUGLIATORI L=148mm

TRASMISSIONE COMPLETA FRIZIONI PER DECESPUGLIATORI L=107mm

GOMMA GUARNIZIONE CONVOGLIATORE ad. LOMBARDINI LDA450/510

TUBO ALIMENTAZIONE TRASPARENTE DOPPIO OCCHIELLO D=5mm L=237mm

PORTALAME IN PLASTICA FALCIATRICE ad. BCS INTERASSE 77mm

PIASTRA IN PLASTICA PORTALAME FALCIATRICE ad. BCS INTERASSE 63mm

CUSCINETTO 6904 2RS 20X38X10

CUSCINETTO 6906 2RS 25X43X10

CUSCINETTO 16004 20x42x9

TAPPO ad. SUPER SPECIAL 140 GOLDONI FRESA 22/22M

FILTRO PESCABENZINA D=8,5X12X42mm

FILTRO PESCABENZINA D=5,3X12X38mm

SERIE MEMBRANE + SPILLO CONICO TILLOTSON

POREX DI RICAMBIO D=12X26mm

VALVOLA ARIA PER CARBURATORE AMAL ad. MINSEL

SERIE MEMBRANE ad. TILLOTSON HS

COPERCHIO CARBURATORE AMAL ad. MINSEL

VASCHETTA CARBURATORE AMAL ad. MINSEL

FERMO SPILLO PER CARBURATORE AMAL ad. MINSEL

VITE PER COPPIA CONICA DECESPUGLIATORE M8X1,25 SX FILETTO 25mm

KIT AGITATORE PER CARBURATORE AMAL ad. MINSEL

PERNO PER GRILLO FIAT 568910 50X12mm

SERIE MEMBRANE ad. NIKKI MITSUBISHI T200/T240

VITE PER COPPIA CONICA DECESPUGLIATORE M10X1,25 SX FILETTO 20

DADO PER VITE COPPIA CONICA DECESPUGLIATORE M10X1,50 SX

VITE PER COPPIA CONICA DECESPUGLIATORE M8X1,25 SX FILETTO 20mm

MOZZO PER DISCO FRIZIONE Z=6 (20X24)

MOZZO PER FRIZIONE CONICA Z=8 (15X12)

GOMMA PORTA FASTON PER REGOLATORE DI TENSIONE

BOBINA INTERNA ad. VOLPI E BOTOLI COTIEMME 180 INTERASSE 46mm

PISTONE COMPLETO ad. MINARELLI I50 D=40mm

FONDELLO CUSCINETTO FRIZIONE ad. PASBO G51 G62

COPPIGLIA UNI D=9X90mm

PISTONE COMPLETO ad. YANMAR L100 LA186 D=86,25mm

SPINA ELASTICA D=4,5X22mm

MOLLE PER FRIZIONI ESPANSIONE ad. MINARELLI CONFEZIONI DA 6 PEZZI

COPPIGLIA UNI D=2X25mm

COPPIGLIA UNI D=1X25mm

COPPIGLIA UNI D=2X40mm

COPPIGLIA UNI D=3X20mm

COPPIGLIA UNI D=5X60mm

COPPIGLIA UNI D=3X40mm

COPPIGLIA UNI D=1,5X30mm

COPPIGLIA UNI D=5X30mm

COPPIGLIA UNI D=4,5X60mm

COPPIGLIA UNI D=4X30mm

COPPIGLIA UNI D=3,50X40mm

BRONZINA BANCO LATO DISTRIBUZIONE ad. ACME ADX370 0,25mm

BRONZINA BANCO LATO VOLANO ad. ACME ADX370 0,25mm RIF. ORIG. 310.108

SERIE GUARNIZIONI COMPLETA ad. ECHO CS302

PERNO PER ATTACCO ATTREZZI D=22X28 L=140mm

PERNO ATTACCO ATTREZZI UNIVERSALE A SALDARE D=19X25mm L=180mm

SERIE MEMBRANE PER DECESPUGLIATORI ad. KAWASAKI TH43/48

FORCELLA FRIZIONE ad. F&M MATRAS D=63mm

INGRANAGGIO ad. KUBOTA L1500/3000/5000 Z=19 D=65mm

INGRANAGGIO DOPPIO ad. KUBOTA L1500/3000/5000 Z=17/21

PIGNONE ad. KUBOTA L1500/3000/5000 Z=15

ALBERO PRIMARIO MAG 2P 1° SERIE

SERIE GUARNIZIONI ad. BETA B90

SERIE SEGMENTI ad. MINARELLI I160 D=57,4mm

CORONA AVVIAMENTO ORIGINALE LOMBARDINI 15LD400

MASSA FILTRANTE PER FILTRI ARIA A MISCELA 9HP H=116mm LARGHEZZA 102mm DIAMETRO INTERNO 95mm DIAMETRO FORO CENTRALE 29mm

MANICO PROFESSIONALE PER LIME TONDE

CASSETTA ASSORTIMENTO OR

TAPPO PER INNESTO RAPIDO FEMMINA 1/2"

MANICOTTO FRIZIONE ad. CARRARO DIAMETRO 62.47mm INTERNO 30.11mm

BOCCHETTONE 16 X 1,5 L38 CHIAVE 22

VITE PER COPPIA CONICA M10 D=9mm LUNGHEZZA FILETTATURA=25mm

VITE PER COPPIA CONICA M10 D=9mm LUNGHEZZA FILETTATURA=19mm

VITE PER COPPIA CONICA M10 D=5mm LUNGHEZZA FILETTATURA=19mm

POMOLO A SFERA D=7mm

POMOLO A SFERA D=10mm

POMOLO A SFERA D=9mm

POMOLO A SFERA 8MA D=6mm

TUBO TELATO PER CARBURANTE CONFERZIONE 5 MT D=8X15mm

IMPUGNATURA UNIVERSALE

TRIVIBIO CONFEZIONE 3 PEZZI

AUTOAVVOLGENTE COMPLETO CON COPPA INNESTO ad. YANMAR L48 LA170

INTERRUTTORE ON OFF CON FILO PER DECESPUGLIATORI E VARI

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO MILLERIGHI

INGRANAGGIO DOPPIO ad. FORT LEONE UNIVERSAL Z=38/43 RIF. ORIG. 15.15.4012/90

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO SCANALATO Z=6

SERIE SEGMENTI ad. JLO152 D=60,8mm

SERIE SEGMENTI ad. ZANETTI A175 D=60,4mm

DISCO FRIZIONE ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

SERIE SEGMENTI ad. MINARELLI I90 D=49,4mm

SERIE SEGMENTI ad. MINARELLI I125 D=55,8X2mm

SERIE SEGMENTI ad. MINSEL H165 D=61,8mm

SERIE SEGMENTI ad. BETA 175 D=62,4mm

SERIE SEGMENTI ad. JLO197 D=66mm

SERIE GUARNIZIONI COMPLETA ad. ALPINA A40/C40

INGRANAGGIO DOPPIO ad. SEP 140 VALPADANA Z=15/20

COPPETTA FISSA PER DECESPUGLIATORI D=8mm

BOBINA ELETTRONICA ORIGINALE LOMBARDINI LGA225/226/340

VITE REGOLAZIONE CARBURATORE AMAL ad. MINARELLI 2 TEMPI

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHCD

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHE 22.19 ad. ZANETTI A175 MINARELLI I190

PERNO FORCELLA TIMONE ad. PASBO G73/G94

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHCD 20.16 ad. BETA CM MINARELLI ZANELLI DUCATI INTERMOTOR COTIEMME VOLPI BOTOLI

GOMMINO PER INTERNO FILTRO ARIA ad. LDA450/LDA510 4LD640 LDA100 4LD820

FLANGIA ad. PASBO G51 DIESSE PER MOTORI A MISCELA

CINGHIA ROLLER A19

GUARNIZIONE SCARICO ad. YANMAR E MADE IN CHINA L100 LA186

ALBERO PRIMARIO ad. GRIFO 22 EXTRA Z=10

CUFFIA ANTIRUMORE STANDARD

COPPIA DISCHI LATERALI MASCHIO ad.MECC.BENASSI RL300/304 ES=28mm

TAPPO LIVELLO OLIO CAMBIO ad. PASBO E VARIE

PIGNONE INFERIORE ad. SEP 140 Z=8 L=265mm

ATTACCO LIMA PER MOTOFALCIATRICE INTERASSE FORI 75mm

GABBIA A RULLI K 16/20/17

PRIMO ALBERO ad. DIESSE Z=15

INGRANAGGIO ad. MAB T4 Z=20/26

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

PARAOLIO BRUMI 35x62x7 RP

PIGNONE TIPO LUNGO FORT TIGROTTO Z=7 L=220mm

CUSCINETTO 6309 2RS

CUSCINETTO 6308 2RS 40x90x23

CUSCINETTO 6304 2RS 20x52x15

CUSCINETTO 6301 2RS 12x37x12

CUSCINETTO 30205

ALBERO PORTA FRESA LISCIO ad. PASQUALI Z=8

MOTORINO AVVIAMENTO PERKINS 2873K404 PIGNONE Z=10 D=39mm INTERASSE FORI=91mm

FLYWheel SIDE BRONZE ad. ACME ADX300/370 STD REF. ORIG. 310.105

OIL SEAL 15x40x8 RP

BEARING 4203 17x40x16

INGRANAGGIO REGOLATORE DI GIRI ad. LOMBARDINI 15LD440

VITE PUNTERIE ad. LOMBARDINI 15LD400/440

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=36mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=35mm

UPPER CONICAL PAIR ad. FORT LION Z=10/45

milling cutter shaft ad. PASQUALI GROOVED

SMERIGLIO SERIES ad. LOMBARDINI 4LD820 LDA820

PAIR OF MALE SIDE DISCS BRUMI REKORD MINIREKORD SIMPLEX ES=30mm

PAIR OF MALE SIDE DISCS ad. PASBO G72/73/83 BRUMI UNIVERSAL SPECIAL ES=27mm

COMPLETE GASKET SERIES ad. ALPINA A70/C70

UPPER CROWN ad. BENASSI RL15 Z=23

LOWER SPROCKET ad. BENASSI RL308 Z=7 L=200mm

LOWER CROWN ad. BARBERS ZEBRA N.T. Z=30

SERIES FULL ZAPPETS 32 PZ ad. PASBO G72/73/82/83/94

PAIR OF FULL DIFFERENTIAL CRICKET HUBS PASBO BRUMI AND MISCELLANEOUS ES=36mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=30mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=28mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF CRICKET HUB HUB HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=30mm

PAIR OF CRICKET HUB HUB HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=28mm

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

FRIZONE CAPPELLET PIN ad. BRUMI UNIVERSAL

FRIZONE HATCH ad. BRUMI UNIVERSAL

MOTOR SHAFT PIN SIDE FLYWHEEL ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 45x62x10

MOTOR SHAFT PIN SIDE FLYWHEEL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

COMPASS HK 30/16

SOCKET 12x1.5 L30 KEY 17

PIN FOR BALANCE GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

OIL LOADING CAP ad. ACME RUGGERINI

UPPER CROWN ad. MAB T3 Z=40

UPPER SPROCKET ad. FERRARI 72 Z=15 L=280mm

LOWER SPROCKET Z=8 ad. GRILL 9000R L=195mm

UPPER CROWN ad. CRICKET 11000 Z=32

CLUTCH SHAFT ad. CRICKET 9000R Z=13

UPPER PINION ad. F&M R4 Z=7

LOWER CONICAL PINION ad. F&M R4

UPPER CONICAL CROWN ad. SEP125 Z=29 REF. ORIG. 210015

SECONDARY SHAFT ad. PASBO G14/G84 Z=10

SPLINED COUPLING FOR BEVEL GEAR PAIR BRUSH CUTTER Z=11

SPROCKET Z=16 D=56mm H=20mm

BEARING 6206 2RS 30x62x16

BEARING 4207 35x72x23

BEARING 4206 30x52x20

BEARING 4205 25x52x18

BEARING 4204 20x47x18

BEARING 7307 2RS

BRONZE HEAD BRASS ad. RUGGERINI RF120/130/140 0.50

STARTER MOTOR + IGNITION BOX HONDA GX160-200-240-270-340 -390 AND SIMILAR MADE IN CHINA

FLANGE HOLDER ad. MAG J52 Z40

BRONZE HEAD BRASS ad. RUGGERINI RD/RF80 0.25

MOTOR PULLEY ad. MAGJ52 Z40

UPPER CONICAL CROWN ad. MAG Z=26

HUB DISC DRIVE MAG J52/Z40

FRONTAL ad. MAG J52

COMPASS HK 17X23X12

CONDUCT PUMP DISC ad. MAG J52

LATERATE COVER ad. MAG J52

6-HOLE ROUND GASKET FOR ENGINE FLANGE ATTACHMENT LOMBARDINI ad. PASBO G14/51/72/73/83/84/94

ORIGINAL CRICKET 127/131 SIDE FLANGE

ROLLER CAGE ad. SEP K30/40/30

K22/28/17 CASORZO ROLLER CAGE AND OTHERS

K25/30/17 CASORZO ROLLER CAGE AND VARIOUS

ROLLER CAGE K 25/30/13

RIGHT COMPASS 40X20

COMPASS HK 35/42/20

ROLLER BEARING WITH RACEWAY NA4902

BEARING NA4901 29X11X13

CROWN ad. BRUMI SIMPLEX Z=42

ORIGINAL CRICKET SHAFT 127

ORIGINAL BEVEL GEAR PAIR CRICKET 127/131 Z=9/30

COMPASS HK 15/12

LOWER SPROCKET ad. FORT LEON UNIVERSAL Z=8 L= 212mm

BEARING 6305 2RS 25x62x17

BEARING 6303 2RS 17x47x14

BEARING 6208 2RS 40x80x12

BEARING 6205 2RS 25x52x15

BEARING 6202 2RS 15x35x11

BEARING 6005 2RS 25x47x12

BEARING 6004 2RS 20x42x15

BEARING 6306 2RS 30x72x19

MILLER SHAFT TREE ad. PASQUALI Z=8

62/22 2RS BEARING

OIL SEAL 38x54x10 RP

OIL SEAL 33X50X10 RP

6211 2RS BEARING

CLUTCH FORK TONGUE ad. PASBO G51 G52 EURO GREEN

GEAR SHAFT ad. PGS Z=13/20 TOOTH DIAMETER=41mm TOOTH DIAMETER=60mm

GEAR ad. MAB T4 3RD SPEED

FOLLE GEAR ad. PASBO G14

CLUTCH BELL ad. PASBO G51 G62

UPPER CROWN ad. PASBO G83 V.T. Z=43 H=45mm

DOUBLE GEAR ad. CRICKET 9000R Z=13/24

CLUTCH FORK ad. FORT TIGROTTO

SIDE COVER SEAL ad. FORT TIGER DIESSE BEAR

KUBOTA L1500/3000/5000 SHAFT Z=11

FITRO IN POREX D=22X34mm ATTACHMENT 8mm

AIR FILTER POCKET ad. FBN D=123mm H=94mm

AIR FILTER POCKET ad. FBN D=118mm H=94mm

AIR FILTER POCKET ad. FBN D=104mm H=64mm

AIR FILTER POCKET ad. FBN D=105mm H=94mm

AIR FILTER POCKET ad. FBN D=103mm H=80mm

FLANGE ad. PASBO JLO 101/125/152 MOTORS CM

SEGMENT SERIES ad. JLO 197 D=66.8mm

FILTER MASS FOR AIR FILTERS FBN LDA450/451/510 3LD450/451/510 RUGGERINI D=128X80

ENGINE CARTER ad. LOMBARDINI 15LD350

SEGMENT SERIES ad. RUGGERINI CRD100 D=100.50mm

MINI TOP HOOD TIE ROD

FULL PISTON ad. ACME A220 D=72.50mm

RPM GEAR ADJUSTMENT ad. HONDA GX160

RPM GEAR ADJUSTMENT ad. HONDA GX240

HONDA GXV270 STARTER PULLEY

OLEOMAC MOTOR MOUNT CONTACT

ORIGINAL LOMBARDINI LDA510 ENGINE MOUNT

ON OFF SWITCH BRUSH CUTTER AND CHAINSAWS

LOMBARDINI 15LD400/440 TAPPET SCREW

CONVEYOR GASKET ad. LOMBARDINI MOTOR L=315mm D=5mm

BOTTOM TANK SUPPORT BRACKET ad. YANMAR L48 LA170

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

ANTIVIBRATING HANDLE FOR MORBID MOTOZAPPA D=21mm

ANTI-VIBRATING HANDLE FOR MORBID MOTOZAPPA D=24mm

ANTI-VIBRATING KNOB FOR MOTOZAPPA RIGID D=22mm

ANTIVIBRATING KNOB FOR MOTOZAPPA RIGID D=27mm

COMBINED BEARING 51107

BARE CYLINDER HEAD WITH VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

CLUTCH DISC ad. SEP 125 D=88mm Z=15 27x25

BLOCKING PIN ad. PASBO G14/51/72/94 D=16mm

milling cutter shaft ad. BERTOLINI BM 10 10 HP

CONICAL PAIR ad. BERTOLINI BM 10 10 HP Z=10/27

FLANGE SHORT HOPE HOLDER ad. GOLDONI FRESA 21M

PRIMARY SHAFT ad. GOLDONI 10 HP

RETROMARCY GEAR ad. PGS Z=17/30

BRUMI BETA STARTER PULLEY ORIGINAL REF. ORIG. 012005006

CASE SLEEVE WITH BEARING - IH D=90mm D=50mm H=22mm

SLEEVE WITH BEARING FORD 741/771/941/951/21101/21105/41101/41102 SENE 2300/40300/41300 JOHN DEERE 420/430/AL2118 D=55mm D=86mm H=20mm

SLEEVE WITH BEARING DEUTZ - FENDI - MASSEY F. - FIAT D=65mm D=97mm H=23mm

FIAT 130 NC NT CLUTCH HANDLE D=55mm D=92mm H=30

SLEEVE WITH BEARING FIAT 450/480/500/540/570/600/640/650/670/680/750/780/880/980/466/566/666/766 D=50mm D=89mm H=22mm

PRIMARY SHAFT ad. BENASSI RL95 Z=10/10 L=220mm

BEARING 4204 20x47x18

FERRARI SHIFT HEADSET 73mm DIAMETER 45mm

BUMPER WITHOUT STAND

BUMPER WITH KICKSTAND

OIL SEAL 35x50x8 RP

OIL SEAL 14x30x7 RP

OIL SEAL 22x33x8 RP

OIL SEAL 16x24x5 RP

OIL SEAL 32x52x7 RP

OIL SEAL 15x40x8 RP

OIL SEAL 18x32x8 RP

OIL SEAL 35x60x10 RP

OIL SEAL 30x40x7 RP

OIL SEAL 35x52x7 RP

OIL SEAL 30x56x10 RP

OIL SEAL 28x52x10 RP

OIL SEAL 42x56x7 RP

OIL SEAL 48X68X10 RP

OIL SEAL 28x52x7 RP

OIL SEAL 15x32x7 RP

BEARING 4202 15x35x14

BEARING 3207 2RS 35x72x27

BEARING 2305 25x62x24

BEARING 6307 2RS 35x80x21

BEARING 6203 2RS 17x40x12

BEARING 6201 2RS 12x32x10

BEARING 6200 2RS 10x30x9

BEARING 6008 2RS 40x68x15

BEARING 6007 2RS 35x62x14

BEARING 6006 2RS 30x55x13

BEARING 6003 2RS 17x35x10

BEARING 6002 2RS 15x32x9

BEARING 6001 2RS 12x28x8

BEARING 6000 2RS 20x26x8

BEARING 32205 25X52X19.5

BEARING 32008 40X68X19

BEARING 30305 62X24X19

BEARING 30209 45X85X19

BEARING 30304 20X52X15

BEARING 30207 72x35x19

BEARING 30203 17X40X13.25

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

CAP FOR CONICAL CLUTCH

RIGHT BLOWER ad. MINARELLI

INTERNAL RING FOR AIR FILTERS ad. LOMBARDINI LDA100/820 4LD640/820 LDA450/510 3LD510 6LD325/360/400/435 LDA520/530 15LD315/350/500

MARMIT ad. MINARELLI I190

MARMIT ad. ACME ALN

MARMIT ad. PASCHAL LOMBARDINI

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

MALE HAND WHEEL M8X25

SPARK PLUG PIPETTE NGK TYPE

BACHILITE SPARK PLUG PIPETTE

CEMENTED BUSHING ES=36

CEMENTED BUSHING ES=35

CEMENTED BUSHING ES=30

CEMENTED BUSHING ES=28

CEMENTED BUSHING ES=27

ANTIVIBRANT M 6 x 8

POMOLO CARBURATORE DELL'ORTO FMCD 201.16

SEEGER PER INTERNO D=82X2,50mm CONFEZIONE DA 10 PEZZI

COPERCHIO FRESA ad. SEP 140

COPERCHIO FRESA ad. SEP 125

PERNO SCANALATO 6 CAVE PROFILO 1" 3/8 L=120mm

TRASMISSIONE COMPLETA FRIZIONI PER DECESPUGLIATORI L=148mm

TRASMISSIONE COMPLETA FRIZIONI PER DECESPUGLIATORI L=107mm

GOMMA GUARNIZIONE CONVOGLIATORE ad. LOMBARDINI LDA450/510

TUBO ALIMENTAZIONE TRASPARENTE DOPPIO OCCHIELLO D=5mm L=237mm

PORTALAME IN PLASTICA FALCIATRICE ad. BCS INTERASSE 77mm

CUSCINETTO 6904 2RS 20X38X10

CUSCINETTO 6906 2RS 25X43X10

CUSCINETTO 16004 20x42x9

TAPPO ad. SUPER SPECIAL 140 GOLDONI FRESA 22/22M

FILTRO PESCABENZINA D=8,5X12X42mm

FILTRO PESCABENZINA D=5,3X12X38mm

SERIE MEMBRANE + SPILLO CONICO TILLOTSON

POREX DI RICAMBIO D=12X26mm

VALVOLA ARIA PER CARBURATORE AMAL ad. MINSEL

SERIE MEMBRANE ad. TILLOTSON HS

COPERCHIO CARBURATORE AMAL ad. MINSEL

VASCHETTA CARBURATORE AMAL ad. MINSEL

FERMO SPILLO PER CARBURATORE AMAL ad. MINSEL

VITE PER COPPIA CONICA DECESPUGLIATORE M8X1,25 SX FILETTO 25mm

KIT AGITATORE PER CARBURATORE AMAL ad. MINSEL

PERNO PER GRILLO FIAT 568910 50X12mm

SERIE MEMBRANE ad. NIKKI MITSUBISHI T200/T240

VITE PER COPPIA CONICA DECESPUGLIATORE M10X1,25 SX FILETTO 20

DADO PER VITE COPPIA CONICA DECESPUGLIATORE M10X1,50 SX

VITE PER COPPIA CONICA DECESPUGLIATORE M8X1,25 SX FILETTO 20mm

MOZZO PER DISCO FRIZIONE Z=6 (20X24)

MOZZO PER FRIZIONE CONICA Z=8 (15X12)

GOMMA PORTA FASTON PER REGOLATORE DI TENSIONE

BOBINA INTERNA ad. VOLPI E BOTOLI COTIEMME 180 INTERASSE 46mm

PISTONE COMPLETO ad. MINARELLI I50 D=40mm

FONDELLO CUSCINETTO FRIZIONE ad. PASBO G51 G62

COPPIGLIA UNI D=9X90mm

PISTONE COMPLETO ad. YANMAR L100 LA186 D=86,25mm

SPINA ELASTICA D=4,5X22mm

MOLLE PER FRIZIONI ESPANSIONE ad. MINARELLI CONFEZIONI DA 6 PEZZI

COPPIGLIA UNI D=2X25mm

COPPIGLIA UNI D=1X25mm

COPPIGLIA UNI D=2X40mm

COPPIGLIA UNI D=3X20mm

COPPIGLIA UNI D=5X60mm

COPPIGLIA UNI D=3X40mm

COPPIGLIA UNI D=1,5X30mm

COPPIGLIA UNI D=5X30mm

COPPIGLIA UNI D=4,5X60mm

COPPIGLIA UNI D=4X30mm

COPPIGLIA UNI D=3,50X40mm

BRONZINA BANCO LATO DISTRIBUZIONE ad. ACME ADX370 0,25mm

BRONZINA BANCO LATO VOLANO ad. ACME ADX370 0,25mm RIF. ORIG. 310.108

SERIE GUARNIZIONI COMPLETA ad. ECHO CS302

PERNO PER ATTACCO ATTREZZI D=22X28 L=140mm

PERNO ATTACCO ATTREZZI UNIVERSALE A SALDARE D=19X25mm L=180mm

SERIE MEMBRANE PER DECESPUGLIATORI ad. KAWASAKI TH43/48

FORCELLA FRIZIONE ad. F&M MATRAS D=63mm

INGRANAGGIO ad. KUBOTA L1500/3000/5000 Z=19 D=65mm

INGRANAGGIO DOPPIO ad. KUBOTA L1500/3000/5000 Z=17/21

PIGNONE ad. KUBOTA L1500/3000/5000 Z=15

SERIE GUARNIZIONI ad. BETA B90

SERIE SEGMENTI ad. MINARELLI I160 D=57,4mm

CORONA AVVIAMENTO ORIGINALE LOMBARDINI 15LD400

MASSA FILTRANTE PER FILTRI ARIA A MISCELA 9HP H=116mm LARGHEZZA 102mm DIAMETRO INTERNO 95mm DIAMETRO FORO CENTRALE 29mm

MANICO PROFESSIONALE PER LIME TONDE

CASSETTA ASSORTIMENTO OR

TAPPO PER INNESTO RAPIDO FEMMINA 1/2"

MANICOTTO FRIZIONE ad. CARRARO DIAMETRO 62.47mm INTERNO 30.11mm

BOCCHETTONE 16 X 1,5 L38 CHIAVE 22

VITE PER COPPIA CONICA M10 D=9mm LUNGHEZZA FILETTATURA=25mm

VITE PER COPPIA CONICA M10 D=9mm LUNGHEZZA FILETTATURA=19mm

VITE PER COPPIA CONICA M10 D=5mm LUNGHEZZA FILETTATURA=19mm

POMOLO A SFERA D=7mm

POMOLO A SFERA D=10mm

POMOLO A SFERA D=9mm

POMOLO A SFERA 8MA D=6mm

TUBO TELATO PER CARBURANTE CONFERZIONE 5 MT D=8X15mm

IMPUGNATURA UNIVERSALE

TRIVIBIO CONFEZIONE 3 PEZZI

AUTOAVVOLGENTE COMPLETO CON COPPA INNESTO ad. YANMAR L48 LA170

INTERRUTTORE ON OFF CON FILO PER DECESPUGLIATORI E VARI

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO MILLERIGHI

INGRANAGGIO DOPPIO ad. FORT LEONE UNIVERSAL Z=38/43 RIF. ORIG. 15.15.4012/90

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO SCANALATO Z=6

SERIE SEGMENTI ad. JLO152 D=60,8mm

SERIE SEGMENTI ad. ZANETTI A175 D=60,4mm

DISCO FRIZIONE ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

SERIE SEGMENTI ad. MINARELLI I90 D=49,4mm

SERIE SEGMENTI ad. MINARELLI I125 D=55,8X2mm

SERIE SEGMENTI ad. MINSEL H165 D=61,8mm

SERIE SEGMENTI ad. BETA 175 D=62,4mm

SERIE SEGMENTI ad. JLO197 D=66mm

SERIE GUARNIZIONI COMPLETA ad. ALPINA A40/C40

INGRANAGGIO DOPPIO ad. SEP 140 VALPADANA Z=15/20

COPPETTA FISSA PER DECESPUGLIATORI D=8mm

BOBINA ELETTRONICA ORIGINALE LOMBARDINI LGA225/226/340

VITE REGOLAZIONE CARBURATORE AMAL ad. MINARELLI 2 TEMPI

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHCD

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHE 22.19 ad. ZANETTI A175 MINARELLI I190

PERNO FORCELLA TIMONE ad. PASBO G73/G94

SERIE GUARNIZIONI PER CARBURATORE DELL'ORTO FHCD 20.16 ad. BETA CM MINARELLI ZANELLI DUCATI INTERMOTOR COTIEMME VOLPI BOTOLI

GOMMINO PER INTERNO FILTRO ARIA ad. LDA450/LDA510 4LD640 LDA100 4LD820

FLANGIA ad. PASBO G51 DIESSE PER MOTORI A MISCELA

CINGHIA ROLLER A19

GUARNIZIONE SCARICO ad. YANMAR E MADE IN CHINA L100 LA186

ALBERO PRIMARIO ad. GRIFO 22 EXTRA Z=10

CUFFIA ANTIRUMORE STANDARD

COPPIA DISCHI LATERALI MASCHIO ad.MECC.BENASSI RL300/304 ES=28mm

TAPPO LIVELLO OLIO CAMBIO ad. PASBO E VARIE

PIGNONE INFERIORE ad. SEP 140 Z=8 L=265mm

ATTACCO LIMA PER MOTOFALCIATRICE INTERASSE FORI 75mm

GABBIA A RULLI K 16/20/17

PRIMO ALBERO ad. DIESSE Z=15

INGRANAGGIO ad. MAB T4 Z=20/26

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

PARAOLIO BRUMI 35x62x7 RP

PIGNONE TIPO LUNGO FORT TIGROTTO Z=7 L=220mm

CUSCINETTO 6309 2RS

CUSCINETTO 6308 2RS 40x90x23

CUSCINETTO 6304 2RS 20x52x15

CUSCINETTO 6301 2RS 12x37x12

CUSCINETTO 30205

ALBERO PORTA FRESA LISCIO ad. PASQUALI Z=8

MOTORINO AVVIAMENTO PERKINS 2873K404 PIGNONE Z=10 D=39mm INTERASSE FORI=91mm

FLYWheel SIDE BRONZE ad. ACME ADX300/370 STD REF. ORIG. 310.105

OIL SEAL 15x40x8 RP

BEARING 4203 17x40x16

INGRANAGGIO REGOLATORE DI GIRI ad. LOMBARDINI 15LD440

VITE PUNTERIE ad. LOMBARDINI 15LD400/440

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=36mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=35mm

UPPER CONICAL PAIR ad. FORT LION Z=10/45

milling cutter shaft ad. PASQUALI GROOVED

SMERIGLIO SERIES ad. LOMBARDINI 4LD820 LDA820

PAIR OF MALE SIDE DISCS BRUMI REKORD MINIREKORD SIMPLEX ES=30mm

PAIR OF MALE SIDE DISCS ad. PASBO G72/73/83 BRUMI UNIVERSAL SPECIAL ES=27mm

COMPLETE GASKET SERIES ad. ALPINA A70/C70

UPPER CROWN ad. BENASSI RL15 Z=23

LOWER SPROCKET ad. BENASSI RL308 Z=7 L=200mm

LOWER CROWN ad. BARBERS ZEBRA N.T. Z=30

SERIES FULL ZAPPETS 32 PZ ad. PASBO G72/73/82/83/94

PAIR OF FULL DIFFERENTIAL CRICKET HUBS PASBO BRUMI AND MISCELLANEOUS ES=36mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=30mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=28mm

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF CRICKET HUB HUB HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=30mm

PAIR OF CRICKET HUB HUB HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=28mm

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

FRIZONE CAPPELLET PIN ad. BRUMI UNIVERSAL

FRIZONE HATCH ad. BRUMI UNIVERSAL

MOTOR SHAFT PIN SIDE FLYWHEEL ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 45x62x10

MOTOR SHAFT PIN SIDE FLYWHEEL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

COMPASS HK 30/16

SOCKET 12x1.5 L30 KEY 17

PIN FOR BALANCE GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

OIL LOADING CAP ad. ACME RUGGERINI

UPPER CROWN ad. MAB T3 Z=40

UPPER SPROCKET ad. FERRARI 72 Z=15 L=280mm

LOWER SPROCKET Z=8 ad. GRILL 9000R L=195mm

UPPER CROWN ad. CRICKET 11000 Z=32

CLUTCH SHAFT ad. CRICKET 9000R Z=13

UPPER PINION ad. F&M R4 Z=7

LOWER CONICAL PINION ad. F&M R4

UPPER CONICAL CROWN ad. SEP125 Z=29 REF. ORIG. 210015

SECONDARY SHAFT ad. PASBO G14/G84 Z=10

SPLINED COUPLING FOR BEVEL GEAR PAIR BRUSH CUTTER Z=11

SPROCKET Z=16 D=56mm H=20mm

BEARING 6206 2RS 30x62x16

BEARING 4207 35x72x23

BEARING 4206 30x52x20

BEARING 4205 25x52x18

BEARING 4204 20x47x18

BEARING 7307 2RS

BRONZE HEAD BRASS ad. RUGGERINI RF120/130/140 0.50

STARTER MOTOR + IGNITION BOX HONDA GX160-200-240-270-340 -390 AND SIMILAR MADE IN CHINA

FLANGE HOLDER ad. MAG J52 Z40

BRONZE HEAD BRASS ad. RUGGERINI RD/RF80 0.25

MOTOR PULLEY ad. MAGJ52 Z40

UPPER CONICAL CROWN ad. MAG Z=26

HUB DISC DRIVE MAG J52/Z40

FRONTAL ad. MAG J52

COMPASS HK 17X23X12

CONDUCT PUMP DISC ad. MAG J52

LATERATE COVER ad. MAG J52

6-HOLE ROUND GASKET FOR ENGINE FLANGE ATTACHMENT LOMBARDINI ad. PASBO G14/51/72/73/83/84/94

ORIGINAL CRICKET 127/131 SIDE FLANGE

ROLLER CAGE ad. SEP K30/40/30

K22/28/17 CASORZO ROLLER CAGE AND OTHERS

K25/30/17 CASORZO ROLLER CAGE AND VARIOUS

ROLLER CAGE K 25/30/13

RIGHT COMPASS 40X20

COMPASS HK 35/42/20

ROLLER BEARING WITH RACEWAY NA4902

BEARING NA4901 29X11X13

CROWN ad. BRUMI SIMPLEX Z=42

ORIGINAL CRICKET SHAFT 127

ORIGINAL BEVEL GEAR PAIR CRICKET 127/131 Z=9/30

COMPASS HK 15/12

BEARING 6305 2RS 25x62x17

BEARING 6303 2RS 17x47x14

BEARING 6208 2RS 40x80x12

BEARING 6205 2RS 25x52x15

BEARING 6202 2RS 15x35x11

BEARING 6005 2RS 25x47x12

BEARING 6004 2RS 20x42x15

BEARING 6306 2RS 30x72x19

MILLER SHAFT TREE ad. PASQUALI Z=8

62/22 2RS BEARING

OIL SEAL 38x54x10 RP

OIL SEAL 33X50X10 RP

6211 2RS BEARING

CLUTCH FORK TONGUE ad. PASBO G51 G52 EURO GREEN

GEAR SHAFT ad. PGS Z=13/20 TOOTH DIAMETER=41mm TOOTH DIAMETER=60mm

GEAR ad. MAB T4 3RD SPEED

FOLLE GEAR ad. PASBO G14

CLUTCH BELL ad. PASBO G51 G62

UPPER CROWN ad. PASBO G83 V.T. Z=43 H=45mm

DOUBLE GEAR ad. CRICKET 9000R Z=13/24

CLUTCH FORK ad. FORT TIGROTTO

SIDE COVER SEAL ad. FORT TIGER DIESSE BEAR

KUBOTA L1500/3000/5000 SHAFT Z=11

FITRO IN POREX D=22X34mm ATTACHMENT 8mm

AIR FILTER POCKET ad. FBN D=123mm H=94mm

AIR FILTER POCKET ad. FBN D=118mm H=94mm

AIR FILTER POCKET ad. FBN D=104mm H=64mm

AIR FILTER POCKET ad. FBN D=105mm H=94mm

AIR FILTER POCKET ad. FBN D=103mm H=80mm

FLANGE ad. PASBO JLO 101/125/152 MOTORS CM

SEGMENT SERIES ad. JLO 197 D=66.8mm

FILTER MASS FOR AIR FILTERS FBN LDA450/451/510 3LD450/451/510 RUGGERINI D=128X80

ENGINE CARTER ad. LOMBARDINI 15LD350

SEGMENT SERIES ad. RUGGERINI CRD100 D=100.50mm

MINI TOP HOOD TIE ROD

RPM GEAR ADJUSTMENT ad. HONDA GX160

RPM GEAR ADJUSTMENT ad. HONDA GX240

FULL PISTON ad. LOMBARDINI 15LD400 STD D=82mm

HONDA GXV270 STARTER PULLEY

OLEOMAC MOTOR MOUNT CONTACT

ORIGINAL LOMBARDINI LDA510 ENGINE MOUNT

ON OFF SWITCH BRUSH CUTTER AND CHAINSAWS

LOMBARDINI 15LD400/440 TAPPET SCREW

CONVEYOR GASKET ad. LOMBARDINI MOTOR L=315mm D=5mm

BOTTOM TANK SUPPORT BRACKET ad. YANMAR L48 LA170

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

ANTIVIBRATING HANDLE FOR MORBID MOTOZAPPA D=21mm

ANTI-VIBRATING HANDLE FOR MORBID MOTOZAPPA D=24mm

ANTI-VIBRATING KNOB FOR MOTOZAPPA RIGID D=22mm

ANTIVIBRATING KNOB FOR MOTOZAPPA RIGID D=27mm

COMBINED BEARING 51107

BLOCKING PIN ad. PASBO G14/51/72/94 D=16mm

milling cutter shaft ad. BERTOLINI BM 10 10 HP

FLANGE SHORT HOPE HOLDER ad. GOLDONI FRESA 21M

RETROMARCY GEAR ad. PGS Z=17/30

CASE SLEEVE WITH BEARING - IH D=90mm D=50mm H=22mm

SLEEVE WITH BEARING FORD 741/771/941/951/21101/21105/41101/41102 SENE 2300/40300/41300 JOHN DEERE 420/430/AL2118 D=55mm D=86mm H=20mm

SLEEVE WITH BEARING DEUTZ - FENDI - MASSEY F. - FIAT D=65mm D=97mm H=23mm

FIAT 130 NC NT CLUTCH HANDLE D=55mm D=92mm H=30

SLEEVE WITH BEARING FIAT 450/480/500/540/570/600/640/650/670/680/750/780/880/980/466/566/666/766 D=50mm D=89mm H=22mm

BEARING 4204 20x47x18

OIL SEAL 38x60x8 RP

FERRARI SHIFT HEADSET 73mm DIAMETER 45mm

BUMPER WITHOUT STAND

BUMPER WITH KICKSTAND

OIL SEAL 38x50x8 RP

OIL SEAL 38x52x8 RP

OIL SEAL 35x50x8 RP

OIL SEAL 14x30x7 RP

OIL SEAL 22x33x8 RP

OIL SEAL 16x24x5 RP

OIL SEAL 32x52x7 RP

OIL SEAL 15x40x8 RP

OIL SEAL 18x32x8 RP

OIL SEAL 35x60x10 RP

OIL SEAL 30x40x7 RP

OIL SEAL 35x52x7 RP

OIL SEAL 30x56x10 RP

OIL SEAL 28x52x10 RP

OIL SEAL 42x56x7 RP

OIL SEAL 48X68X10 RP

OIL SEAL 28x52x7 RP

OIL SEAL 15x32x7 RP

BEARING 4202 15x35x14

BEARING 3207 2RS 35x72x27

BEARING 2305 25x62x24

BEARING 6307 2RS 35x80x21

BEARING 6203 2RS 17x40x12

BEARING 6201 2RS 12x32x10

BEARING 6200 2RS 10x30x9

BEARING 6008 2RS 40x68x15

BEARING 6007 2RS 35x62x14

BEARING 6006 2RS 30x55x13

BEARING 6003 2RS 17x35x10

BEARING 6002 2RS 15x32x9

BEARING 6001 2RS 12x28x8

BEARING 6000 2RS 20x26x8

BEARING 32205 25X52X19.5

BEARING 32008 40X68X19

BEARING 30305 62X24X19

BEARING 30209 45X85X19

BEARING 30304 20X52X15

BEARING 30207 72x35x19

BEARING 30203 17X40X13.25

OIL SEAL 25x58x10 RP

OIL SEAL 28x62x10 RP

OIL SEAL 45x25x10 RP

OIL SEAL 52x68x8 RP

OIL SEAL 40x72x10 RP

CAP FOR CONICAL CLUTCH

RIGHT BLOWER ad. MINARELLI

D=14mm SLEEVED MOUNTING BUTTON

D=12mm SLEEVED MOUNTING BUTTON

D=10mm SLEEVED MOUNTING BUTTON

D=8mm SLEEVED MOUNTING BUTTON

D=6mm SLEEVED MOUNTING BUTTON

ROLLER BELT A36

WATER HOSE PACKAGE 5 MT

OIL SEAL 40x7x7 RP

OIL SEAL 17x47x8 RP

OIL SEAL 30x62x10 RP

OIL SEAL 17x42x7 RP

OIL SEAL 35x45x7 RP

OIL SEAL 12x19x5 RP

OIL SEAL 34x50x10 RP

OIL SEAL 30x47x10 RP

OIL SEAL 30x56x10 RP

OIL SEAL 42x58x10 RP

OIL SEAL 42x58x7 RP

OIL SEAL 40x55x8 RP

PARALIO 70x100x10 RP

OIL SEAL 45x72x10 RP

OIL SEAL 45x62x10 RP

OIL SEAL 42x62x10 RP

OIL SEAL 40x62x10 RP

OIL SEAL 40x60x10 RP

OIL SEAL 40x56x8 RP

OIL SEAL 40x52x7 RP

OIL SEAL 35x72x10 RP

OIL SEAL 35x62x10 RP

OIL SEAL 35x52x8 RP

OIL SEAL 35x52x10 RP

OIL SEAL 35x47x7 RP

OIL SEAL 34x52x10 RP

OIL SEAL 30x62x8 RP

OIL SEAL 30x55x8 RP

OIL SEAL 30x52x8 RP

OIL SEAL 30x52x10 RP

OIL SEAL 30x50x10 RP

OIL SEAL 30x47x7 RP

OIL SEAL 25x52x8 RP

OIL SEAL 25x50x10 RP

OIL SEAL 25x47x7 RP

OIL SEAL 25x40x8 RP

OIL SEAL 22x40x7 RP

OIL SEAL 20x52x10 RP

OIL SEAL 20x42x8 RP

OIL SEAL 20x40x7 RP

OIL SEAL 12x24x7 RP

OIL SEAL 42x62x8 RP

OIL SEAL 32x45x6 RP

OIL SEAL 32x45x7 RP

OIL SEAL 30x42x7 RP

OIL SEAL 29x45x9 RP

OIL SEAL 28x38x7 RP

OIL SEAL 25x45x8 RP

OIL SEAL 25x42x7 RP

OIL SEAL 25x38x7 RP

OIL SEAL 25x37x7 RP

OIL SEAL 25x35x7 RP

OIL SEAL 22x32x8 RP

OIL SEAL 22x35x7 RP

OIL SEAL 20x47x7 RP

OIL SEAL 20x35x7 RP

OIL SEAL 20x32x7 RP

OIL SEAL 20x30x7 RP

OIL SEAL 20x28x7 RP

OIL SEAL 17x47x7 RP

OIL SEAL 17x40x7 RP

OIL SEAL 17x35x7 RP

OIL SEAL 17x30x7 RP

OIL SEAL 17x28x7 RP

OIL SEAL 15x35x7 RP

OIL SEAL 15x42x7 RP

OIL SEAL 15x40x7 RP

OIL SEAL 15x30x7 RP

OIL SEAL 15x28x7 RP

OIL SEAL 15x27x7 RP

OIL SEAL 15x24x7 RP

OIL SEAL 14x22x4 RP

OIL SEAL 14x24x7 RP

OIL SEAL 17x30x7

OIL SEAL 45x60x7 RP

OIL SEAL 45x65x8 RP

OIL SEAL 25x62x10 RP

OIL SEAL 30x50x7 RP

OIL SEAL 30x56x8 RP

OIL SEAL 80x85x10 RP

OIL SEAL 72x10x17 RP

OIL SEAL 42x62x10 RP

OIL SEAL 50x25x10 RP

OIL SEAL 52x68x8 RP

OIL SEAL 52x72x10 RP

60082RS BEARING

OIL SEAL 35x47x7 RP

OIL SEAL 35x50x8 RP

OIL SEAL 50x35x10 RP

OIL SEAL 30x52x7

OIL SEAL 30x72x8

OIL SEAL 30x62x10

OIL SEAL 30x47x10

OIL SEAL 25x46x7

DIESEL GASOLINE OIL 15W40 1LT PACK

DIESEL GASOLINE OIL 10W40 1LT PACK

SAE 90 GEARBOX OIL 1LT PACK

6203 2RS BEARING

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

SIDE SCREW SCREW CLAMP 2.5mm DIAMETER

SERRAFILE CLAMP WITH GRAIN DIAMETER 2mm

WIRE CLAMP DIAMETER 2mm

SCREW SCREW CLAMP IN HEAD DIAMETER 8X11mm

CANDLE CABLE D=7mm PACK 2.5 METERS

RED PUTTY FOR CUTTER CASING

SELF-AVOLVING ROPE D= 4.5mm x 100m

SELF-AVOLVING ROPE D= 4mm x 100m

SELF-AVOLVING ROPE D= 3.5mm x 100m

SELF-AVOLVING ROPE D= 3mm x 100m

ROLLER BELT A38

ROLLER BELT A38.5

GAS GUARD d=4.5x50m

ANTIVIBRANT M 6 x 6

MALE HAND WHEEL M8X25

SPARK PLUG PIPETTE NGK TYPE

BACHILITE SPARK PLUG PIPETTE

NAKED LEVER GASOLINE ACCIDENT PREVENTION

CEMENTED BUSHING ES=36

CEMENTED BUSHING ES=35

CEMENTED BUSHING ES=30

CEMENTED BUSHING ES=28

CEMENTED BUSHING ES=27

GAS HANDLE WITH LEFT SCREW

GAS HANDLE WITH RIGHT SCREW

GAS HANDLE WITH RIGHT SCREW CLAMP

GAS HANDLE WITH RIGHT SCREW ON - OFF

ANTIVIBRANT M 6 x 8

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

CLUTCH SLEEVE ad. PASQUALI D=67mm d=35mm

CLUTCH SLEEVE ad. F&M L300 D=50mm d=22mm

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH SLEEVE ad. PASQUALI AND VARIOUS MODELS D=82mm d=33mm

FONDELLO CUSCINETTO FRIZIONE ad. PASBO G51 G62

FLANGIA ad. PASBO G51 DIESSE PER MOTORI A MISCELA

TAPPO LIVELLO OLIO CAMBIO ad. PASBO E VARIE

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=36mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=35mm

FLANGE ad. PASBO JLO 101/125/152 MOTORS CM

BRACKET FOR AIR FILTER 9 HP ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI MOTOR HOES PASBO BRUMI

SPERONE TIMONE ad. PASBO G51

FLANGE ad. MOTOR HOE PASBO G84

FLANGE ad. PASBO G14

RUBBER FOOTNOTE ad. PABO G51

EXTERNAL SCANALED HUB ad. PASBO G14/84/94 Z=8

UPPER CROWN Z=43 H51 PASBO G73

FLANGE ad. PASBO G51 ROTARY TILLER FOR JLO152 ENGINE

DOUBLE SLIDING GEAR ad. PASBO G84 Z=23/28

LOWER BODY ad. PASBO G14/84

ARM SUPPORT TIMONE ad. PASBO G72/73/83

ARM SUPPORT TIMONE ad. PASBO G14/84/94

RETROMARCY PIN ad. PASBO G94

FIRST TREE ad. PASBO G62 Z=10

PRIMARY SHAFT ad. PASBO G73/83

FLANGE ad. PASBO G73

INTERNAL SCALED HUB ad. PASBO G14/84/94 Z=8

Bearing DHK 12/10 ad. PASBO G14

PASBO G51 CLUTCH FORK

RETROMARCY GEAR ad. PASBO G14 Z=15/18/26

RETROMARCY PIN ad. PASBO G14/73/72/83

MILLED SKATE ad. PASBO G73

PASBO G94 G14 CLUTCH CONE

PASBO CLUTCH CONE OLD TYPE G84/14 Z=6

SLIDING GEAR ad. PASBO G14 Z=23/28

SLIDING GEAR ad. PASBO 619 Z=38/43

PASBO G73 REVERSE GEAR Z=12/24

UPPER CROWN Z=43 H61 PASBO G73

UPPER CONICAL CROWN ad. PASBO G51 Z=63

STEM LOCKING PIN WITH PUSH BUTTON

RAX 718 ad. PASBO G73/83

TANK CAP ad. PASBO MIXTURE

LOWER BODY SEAL (0.5) ad. PASBO

ENGINE FLANGE GASKET ad. PASBO TILLER

BRONZE BRAKE BRAKE BRAKE PAD ad. PASBO G72/73/83

LATERAL COVER ad. PASBO G73/83/94

RETROMARCY SPRING ad. PASBO G73/83/14

REPAIR FRESH AXIS ad. PASBO G14/84/94 G83 ES=30

BEARING 30204 20X47X15.25

NAZ BEARING K 10 16 12 ad. PASBO G73/83

BEARING 6009 2RS 45X75X16 CFC FOR PASBO G72/G73/G83/G84/G94 MILLING SHAFT

COMPLETE GAS TRANSMISSION BRUMI/PASBO PACK 10 PIECES

CLUTCH BELL ad. PASBO G73 FOR JLO 101/152 CM

OIL LEVEL CAP ad. PASBO

ANGULAR SLEEVE ad. JLO/BRUMS/PASBO AND MISCELLANEOUS

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO/BRUMI AND VARIOUS BRANDS ES=30

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO/BRUMI AND VARIOUS BRANDS ES=27

SPERONE TIMONE ad. PASBO G72/73/83

SPERONE TIMONE ad. PASBO G14/94

FOURTH STAR HUB III ELEMENT ad. PASBO G14/84/94 ES=30

THIRD STAR HUB II ELEMENT ad. PASBO G14/84/94 ES=30

CENTRAL HUB SLEEVE I ELEMENT ad. PASBO G14/84/94 ES=30

FOURTH STAR HUB III ELEMENT ad. PASBO G72/73/83 ES=27

THIRD STAR HUB II ELEMENT ad. PASBO G72/73/83 ES=27

HEAD HOLDERS CENTRAL HUB I ELEMENT ad. PASBO G72/73/83 ES=27

UPPER CONICAL WHEEL CROWN ad. PASBO G94 Z=43

LOWER CONICAL PAIR ad. PASBO G14 Z=9/32

CONICAL CHANGE SPROCKET ad. PASBO G72/73/82/83 Z=10

MARMIT ad. PASBO JLO 152 N.T.

HEXAGONAL AXIS ad. PASBO G14 ES=30 L=300 mm HOLE INTERAX 247mm

HEXAGONAL AXIS ad. PASBO G14 ES=30 L=290mm HOLE INTERAX 237mm

HEXAGONAL AXIS ad. PASBO G72/73/83 ES=27 L=300mm HOLE INTERAXIS 247mm

HEXAGONAL AXIS ad. PASBO G72/73/83 ES=27 L=290mm HOLE INTERAXIS 237mm

TIMONE FORK PIN ad. PASBO AND MISCELLANEOUS

DIFFERENTIAL CRICKET HUB COUPLE ad. PASBO BRUMI AND MISCELLANEOUS ES=35

COUPLE CRICKET HUB PITCH HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27

LOWER BODY ad. PASBO G72/73/83/94

LOWER CONICAL PAIR ad. PASBO G84/94 Z=8/29

LOWER CONICAL PAIR ad. PASBO G72/73/83 Z=8/33

FIRST TREE ad. PASBO G31/51/71 Z=10

SECONDARY SHAFT ad. PASBO G94 Z=10

PRIMARY SHAFT ad. PASBO G94 Z=13/17/21

CROWN HOLDING AXIS ad. PASBO G14 ES=30 L=140mm

FLANGE ad. PASBO G94

UPPER BODY ad. PASBO G51

CROWN HOLDING AXIS ad. PASBO G94 ES=30 L=130mm

CORONA BRACKET AXIS ad. PASBO G51/72/73/83 ES=27

milling shaft wrench ad. PASBO G14/73/83/91

DOUBLE SLIDING GEAR ad. PASBO G73 Z=17/19

TRIPLE SLIDING GEAR ad. PASBO G94 Z=31/35/39

DOUBLE GEAR ad. PASBO G72/73 Z=28/32

RETROMARCY GEAR Z=13/20 ad. PASBO G94

CLUTCH FORK ad. PASBO G72/73/83

CLUTCH FORK ad. PASBO G14/84/94

CLUTCH CONE ad. PASBO Z=12 G72/73/83

CLUTCH CONE ad. PASBO Z=6 G31/41/51

CLUTCH BELL ad. PASBO G14/84/94

DIESEL ATTACHMENT CLUTCH BELL ad. PASBO G72/73/83

CLUTCH RING ad. PASBO G51

POWER TAKE-OFF COVER ad. PASBO G14/94

CLUTCH RING ad. PASBO G72/73/83

RAX 718 ad. PASBO G73/83

NIGHT MARCHES ad. PASBO

EXTERNAL SCANALED HUB ad. PASBO G14/84/94 Z=8

WOLF FELT DUST PROOF ad. PASBO G14/51/72/73/83/84/94 D=45x62x5mm

LABYRINTH DISC ad. PASBO G72/G73 D=45/62mm

BLOCKING PIN ad. PASBO G14/51/72/94 D=16mm

NUT BLOCK ad. PASBO G14/51/72/94 D=16mm

GALVANIZED PIN HANDLE ad. PASBO G14/51/72/94 D=8mm

POWER TAKE-OFF COVER ad. PASBO G72/73

SHORT CONICAL FIXED PIN ad. PASBO G72/73/83

BRONZE CLUTCH PADS ad. PASBO G72/73/83

REPAIR FRESH AXIS ad. PASBO G14/84/94 G83 ES=30

REPAIR FRESH AXIS ad. PASBO G51/72/73/83 ES=27

CLUTCH SPRING ad. PASBO G14/84/94

CLUTCH SPRING ad. PASBO G51

CLUTCH SPRING ad. PASBO G72/G73/G83

LOWER BODY GASKET ad. PASBO G14/51/62/72/73/83/84/94

LOWER FLANGE SEAL ad. PASBO G51/62/72/73/83/84/94

CLUTCH DISC ad. F&M D7 D=105mm Z=26 (56x49)

TRIPLE GEAR ad. F&M R5 Z=45/39/35

MILLER HOLDING SHAFT ad. F&M R5 ES=27mm

LOWER CONICAL PAIR ad. F&M R5 450 Z= 7/27

LOWER CONICAL PAIR ad. F&M R5 430/440 Z=7/25

STEEL DISC ad. F&M D7

UPPER CONICAL PAIR ad. F&M R5

TERMINAL DISC ad. F&M D7 D=108mm Z=8

HUB II ELEMENT ad. F&M R5 ES=27

HUB I ELEMENT ad. F&M R5 ES=27

CONICAL PAIR ad. F&M L300 Z=7/22

CLUTCH SLEEVE ad. F&M L300 D=50mm d=22mm

SPINGIDISCO LEVER CLUTCH ad. F&M L300 D=160mm

LAMELLAR CLUTCH ad. F&M R5 Z=9 (17x14)

CONICAL CLUTCH ad. F&M R5 DIESEL H=85mm Z=9 (17x14)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

CLUTCH DISC ad. F&M R5 D=94m Z=9 (17x15)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=36mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=35mm

STEEL CLUTCH CONE ORIGINAL BRUMI REKORD AND MINIREKORD REF. ORIG. 224100005

CLUTCH BELL WITH ORIGINAL FERODE BRUMI REKORD AND MINIREKORD REF. ORIG. 224100004

BRUMI BETA STARTER PULLEY ORIGINAL REF. ORIG. 012005006

BRACKET FOR AIR FILTER 9 HP ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI MOTOR HOES PASBO BRUMI

SPERONE TIMONE ad. MOTOR HOE BRUMI SIMPLEX

SPERONE TIMONE ad. BRUMI UNIVERSAL

Bumper ad. BRUMI UNIVERSAL

LATERAL HUB LAPS SUPPORT III ELEMENT ad. BRUMI REKORD MINIREKORD SIMPLEX ES=30

SIDE HUB SUPPORT III ELEMENT LAPS ad. BRUMI UNIVERSAL SPECIAL ES=27

Bumper ad. BRUMI UNIVERSAL

DOUBLE GEAR ad. BRUMI SIMPLEX Z=31/36

BRUMI UNIVERSAL CLUTCH SHAFT Z=10

CLUTCH DISENGAGING LEVER ad. BRUMI UNIVERSAL

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

CLUTCH LEVER WITH STATIONING ad. BRUMI/BARBIERI/SEP D=27mm

FIXED COUPLE ad. BRUMI UNIVERSAL SIMPLEX

REDUCTION GEAR ad. BRUMI UNIVERSAL Z=57

CLUTCH HUB ad. BRUMI SIMPLEX FORT MONODISCO/BIDISCO H=42mm Z=6 (14x11)

CLUTCH CONE ad. BRUMI SIMPLEX 1ST SERIES

NKI 25/30 BRUMI SIMPLEX BEARING

OIL SEAL ad. BRUMI SIMPLEX 35x62x8 RP

UNIVERSAL BEARING 32007 BRUMI SIMPLEX REKORD 35X62X18

TRANSMISSION COMPLETE CLUTCH BRUMI UNIVERSAL PACK 10 PIECES

COMPLETE GAS TRANSMISSION BRUMI/PASBO PACK 10 PIECES

FIXED COUPLE ad. BRUMI REKORD

TURNING CUP ad. BRUMI REKORD

SIMPLEX CLUTCH BELL 1ST SERIES Z=6

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

DOUBLE GEAR ad. BRUMI SIMPLEX 31/36

SHIFT LEVER BELLOW ad. BRUMI UNIVERSAL SPECIAL

ANGULAR SLEEVE ad. JLO/BRUMS/PASBO AND MISCELLANEOUS

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO/BRUMI AND VARIOUS BRANDS ES=30

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO/BRUMI AND VARIOUS BRANDS ES=27

SUPPORT LATERAL HUB III ELEMENT LAPS WITH BATTLE ad. BRUMI REKORD MINIREKORD SIMPLEX ES=30

SUPPORT INTERNAL HUB LAPS II ELEMENT ad. BRUMI REKORD MINIREKORD SIMPLEX ES=30

CENTRAL HUB ZAPS SUPPORT I ELEMENT ad. BRUMI REKORD MINIREKORD SIMPLEX ES=30

SIDE HUB SUPPORT III ELEMENT WITH SLEEVE ad. BRUMI UNIVERSAL SPECIAL ES=27

SUPPORT INTERNAL HUB BALLS II ELEMENT ad. BRUMI UNIVERSAL SPECIAL ES=27

CENTRAL HUB ZAPS SUPPORT I ELEMENT ad. BRUMI UNIVERSAL SPECIAL ES=27

FERODO FRITION ad. BRUMI UNIVERSAL SPECIAL

MARMIT ad. BRUMI JLO L101/125/152 BETA 210

DIFFERENTIAL CRICKET HUB COUPLE ad. PASBO BRUMI AND MISCELLANEOUS ES=35

COUPLE CRICKET HUB PITCH HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27

CLUTCH WASHER ad. BRUMI UNIVERSAL

BRACKET FOR AIR FILTER Hp 7 ad. BRUMI JLO101/152

SWIVEL COUPLE ad. BRUMI UNIVERSAL SIMPLEX

CLUTCH FORK ad. BRUMI SIMPLEX

UPPER CONICAL PAIR ad. BRUMI SIMPLEX

CONICAL PAIR ad. BRUMI UNIVERSAL Z=7/22 ES=27

CONICAL PAIR ad. BRUMI FLEA Z=10/18 ES=19

CONICAL PAIR ad. BRUMI SIMPLEX Z=7/23 ES=30

CONICAL PAIR ad. BRUMI REKORD Z=8/26 ES=30

CONICAL PAIR ad. BRUMI MINIREKORD Z=9/30 ES=30

CONICAL COUPLE UNDERCHIOMA MULETTO ad. BRUMI Z=8/26 ES=32

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

MONODISCO/BIDISCO CLUTCH DISCS ad. BRUMI SIMPLEX FORT D=94m Z=8 (15X13)

CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12) CONICAL ATTACHMENT 17/13 FOR MIXED ENGINES.

LOWER SPROCKET ad. BENASSI RL308 Z=7 L=200mm

PAIR OF FIXED WHEELHOLDER MOUNTS ad. BENASSI ES=28

LOWER CONICAL PAIR ad. BENASSI MECHANICAL BL75 Z=7/23

MILLER BEARING SHAFT ad. BENASSI RL15 L=320mm ES=35mm

HUB II ELEMENT WITH BATTLE ad. MECC.BENASSI RL 300/304 ES=28

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

CONICAL COUPLER LENGTH 180mm ad. BENASSI Z=7/24

BEARING ad. BENASSI BARBIERI BRUMI FORT D=49mm D=24mm

PRIMARY SHAFT ad. BENASSI RL15 Z=13

HUB I ELEMENT ad. MECC.BENASSI RL 300/304 ES=28

HUB I ELEMENT ad. MECC.BENASSI BL 75 ES=20

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I125/150 D=88/91mm

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I80/90 D=81mm

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

INGRANAGGIO DOPPIO ad. FORT LEONE UNIVERSAL Z=38/43 RIF. ORIG. 15.15.4012/90

ORIGINAL FORT LEON MINITIGRE Z=10/32 L=232mm BEARBACK COUPLING 30mm OUTER CROWN DIAMETER=100mm ORIGINAL REF. 157114101 + 15714045

CLUTCH DISC ad. FORT D=160mm Z=10 (20x16)

CONICAL CLUTCH ad. FORT TIGROTTO FOR 2-STROKE ENGINES H=83mm Z=8 (15x12) CONICAL ATTACHMENT 17/13

MILLER SHAFT SHAFT ad. FORT TIGROTTO HOLED ES=27mm ORIGINAL REF. 15-07-403339

HUB II/III ELEMENT ad. FORT ES=27

HUB I ELEMENT ad. FORT ES=27

LOWER CONICAL PAIR ad. FORT LION UNIVERSAL Z=8/24

PINION ad. SHORT TYPE FORT TIGER Z=7

STEEL CLUTCH CONE ad. FORT TIGER Z=8 (15X12)

LATERAL COVER ad. FORT TIGROTTO

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

LOWER CONICAL PAIR ad. FORT TIGER Z=7/22

milling cutter shaft ad. FORT TIGER DRILLED ES=27 REF. ORIG. 15-07-403339

CUTTER SHAFT SHAFT ad. FORT TIGROTTO PERFORATED ES=27 L= 260mm ORIGIN REF. 15-07-403339

CUTTER SHAFT SHAFT ad. FORT TIGROTTO ES=27 L=300mm ORIG. REF. 15-07-403339

MILLING SHAFT TREE ad. FORT LION ES=35

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. OLD BARBIERI TYPE CONDOR FORT D=110mm d=32mm

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

COPERCHIO FRESA ad. SEP 140

COPERCHIO FRESA ad. SEP 125

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO SCANALATO Z=6

INGRANAGGIO DOPPIO ad. SEP 140 VALPADANA Z=15/20

CLUTCH DISC FOR MULTIDISCO clutches ad. BARBIERI FORT BENASSI SEP GOLDONI AND MISCELLANEOUS D=92mm Z=6

MILLER SHAFT ad. SEP 140 MOTOAGRICOLA SEP 138 HEXAGONAL ES=35mm

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

CLUTCH HUB ad. SEP 125 H=40mm Z=6 (13x13)

CLUTCH HUB ad. SEP 125 H=38mm Z=8 (15x12)

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15X12)

LEFT BRAKE HUB ad. SEP 115/125 ES=35mm

SMOOTH DISC ad. SEP 125 Z=4 (85X3)

RIGHT MILLER HUB ad. SEP 115/125 ES=35mm

BENASSI SEP GEAR JOINT PAWL

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15X12)

CLUTCH HUB ad. SEP VALPADANA 125 H=52mm Z=8 (15X12)

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15x12)

DOUBLE SLIDING GEAR ad. SEP 140 Z=6/27/31

SLOTTED BUSH ad. SEP 140 Z=8

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

CLUTCH DISC ad. SEP 125 D=88x11.5mm Z=15

PERNO PER GRILLO FIAT 568910 50X12mm

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12) CONICAL ATTACHMENT 17/13 FOR MIXED ENGINES.

LOWER SPROCKET Z=8 ad. GRILL 9000R L=195mm

SPERONE TIMONE ad. GRILLO

UPPER CROWN ad. CRICKET 9000R Z=6

COMPONENTS FOR CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

CLUTCH RING 4 HOLES ad. CRICKET 11,000 AND VARIOUS

SLIDING GEAR ad. CRICKET 11000/11500 REF. ORIG. 21201

PRIMARY SHAFT Z=8/8/12/17 ad. CRICKET 11000/11500 REF. ORIG. 21198

PRIMARY SHAFT + SLIDING GEAR ad. CRICKET 11000/11500 Z=8/8/12/17 REF. ORIG. 21198

MILLER BRACKET SHAFT ad. CRICKET 11000 ES=27 REF. ORIG. 11383

CONICAL PAIR ad. GRILLO Z=8/30

CLUTCH REVISION KIT ad. CRICKET 9000R MAB AND VARIOUS BRANDS

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

DIAFRAM CLUTCH SPINGIDISCO ad. GRILLE 131 D=160mm

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

CLUTCH DISC ad. MOTOCOLTIVATOR GRILLE 131 D=160mm Z=6 (16x13)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

ALBERO PRIMARIO ad. GRIFO 22 EXTRA Z=10

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON MAJOR Z=12

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON 22 Z=10/18/20

milling cutter shaft ad. GRYPHON 22 LONG TYPE ES=27

milling cutter shaft ad. GRYPHON 22 SHORT TYPE ES=27

CONICAL PAIR ad. GRYPHON 22 Z=7/23

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

LOWER CROWN ad. BARBERS ZEBRA N.T. Z=30

LOWER CONICAL PAIR ad. BARBIERI TIGER Z=7/21 REF. ORIG. 1306009-13060

CLUTCH DISC FOR MULTIDISCO clutches ad. BARBIERI FORT BENASSI SEP GOLDONI AND MISCELLANEOUS D=92mm Z=6

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

CLUTCH LEVER WITH STATIONING ad. BRUMI/BARBIERI/SEP D=27mm

CLUTCH DISC ad. BCS BARBIERI GOLDONI D=159mm Z=10 (19X15)

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

CONICAL PAIR ad. BARBIERI ZEBRA Z=8/27

LOWER CONICAL PAIR ad. BARBIERI GHEPARD Z=7/24 REF. ORIG. 6802502+680250

DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=13/27/31

PRIMARY TREE ad. BARBERS GAZELLE Z=9/9/13/18

PRIMARY SHAFT + DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=9/9/13/18 Z=13/27/31

MILLER SHAFT TREE ad. BARBIERI CONDOR ES=27 REF. ORIG. 01014

LOWER CONICAL PAIR ad. BARBIERI CORTINA Z=7/21 REF. ORIG. 1306009-30026

LOWER CONICAL PAIR ad. BARBIERI CONDOR 27 Z=9/27 REF. ORIG. 01011+01012

LOWER CONICAL PAIR ad. BARBIERI CONDOR ES=35 Z=9/27 REF. ORIG. 04062-01011

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. OLD BARBIERI TYPE CONDOR FORT D=110mm d=32mm

INGRANAGGIO ad. MAB T4 Z=20/26

milling cutter shaft ad. MAB T4

CONICAL PAIR ad. MAB T4 BONORI Z=8/28

CONICAL PAIR ad. MAB T4 BONORI Z=7/25

CLUTCH REVISION KIT ad. CRICKET 9000R MAB AND VARIOUS BRANDS

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH DISC DISC DISC ad. MAB T4 ADRIATICA

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

ALBERO PRIMARIO MAG 2P 1° SERIE

CONICAL PAIR + MILLING SHAFT ad. MAG J52 Z=7/23

milling cutter shaft with square ad. MAG 2P

BEVEL GEAR PAIR + MAG SHAFT J52

CONICAL PAIR ad. MAG Z=7/24

CONICAL PAIR ad. MAG Z80 Z=8/23

CLUTCH SPRING ad. MAG J52

BEARING 6207 MAG J72 Z80 35X72X17

RIGHT SLEEVE ad. MAG/COTIEMME/MINARELLI

CONICAL PAIR ad. MAG J72 Z=8/18

CONICAL PAIR ad. MAG Z=7/26

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

CONICAL PAIR ad. IMER Z=9/34

MILLER BEARING SHAFT ad. IMER ES=27

CONICAL PAIR ad. IMER Z=9/27

RIGHT SLEEVE ad. MAG/COTIEMME/MINARELLI

CONICAL PAIR ad. MAG J72 Z=8/18

CONICAL PAIR ad. MAG Z=7/26

MILLER BEARING SHAFT ad. IMER ES=27

CONICAL PAIR ad. IMER Z=9/27

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. MOTOZAPPA CASORZO SU4 VIGNETO D=145mm Z=10 (26X21)

COPERCHIO FRESA ad. SEP 140

COPERCHIO FRESA ad. SEP 125

PIASTRA IN PLASTICA PORTALAME FALCIATRICE ad. BCS INTERASSE 63mm

PERNO PER GRILLO FIAT 568910 50X12mm

PISTONE COMPLETO ad. MINARELLI I50 D=40mm

FONDELLO CUSCINETTO FRIZIONE ad. PASBO G51 G62

ALBERO PRIMARIO MAG 2P 1° SERIE

INGRANAGGIO DOPPIO ad. FORT LEONE UNIVERSAL Z=38/43 RIF. ORIG. 15.15.4012/90

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO SCANALATO Z=6

INGRANAGGIO DOPPIO ad. SEP 140 VALPADANA Z=15/20

FLANGIA ad. PASBO G51 DIESSE PER MOTORI A MISCELA

ALBERO PRIMARIO ad. GRIFO 22 EXTRA Z=10

TAPPO LIVELLO OLIO CAMBIO ad. PASBO E VARIE

INGRANAGGIO ad. MAB T4 Z=20/26

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

PAIR OF FULL DIFFERENTIAL CRICKET HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=36mm

PAIR OF FIXED WHEELHOLDER HUBS ad. PASBO BRUMI AND VARIOUS BRANDS ES=35mm

ORIGINAL FORT LEON MINITIGRE Z=10/32 L=232mm BEARBACK COUPLING 30mm OUTER CROWN DIAMETER=100mm ORIGINAL REF. 157114101 + 15714045

STEEL CLUTCH CONE ORIGINAL BRUMI REKORD AND MINIREKORD REF. ORIG. 224100005

CLUTCH BELL WITH ORIGINAL FERODE BRUMI REKORD AND MINIREKORD REF. ORIG. 224100004

CLUTCH DISC ad. FORT D=160mm Z=10 (20x16)

CONICAL CLUTCH ad. FORT TIGROTTO FOR 2-STROKE ENGINES H=83mm Z=8 (15x12) CONICAL ATTACHMENT 17/13

MILLER SHAFT SHAFT ad. FORT TIGROTTO HOLED ES=27mm ORIGINAL REF. 15-07-403339

LOWER SPROCKET Z=8 ad. GRILL 9000R L=195mm

CLUTCH DISC ad. F&M D7 D=105mm Z=26 (56x49)

POWER TUBE ad. LOMBARDINI AND VARIOUS ENGINES 14mm DIAMETER LENGTH 45.57cm

CONICAL PAIR ad. BERTOLINI BM 10 10 HP Z=10/27

LOWER CONICAL PAIR ad. BARBIERI TIGER Z=7/21 REF. ORIG. 1306009-13060

PAIR OF ROLLER CUTTER ROLLERS FOR MOTOZAPPE ES= 23mm

CASE SLEEVE WITH BEARING - IH D=90mm D=50mm H=22mm

SLEEVE WITH BEARING FORD 741/771/941/951/21101/21105/41101/41102 SENE 2300/40300/41300 JOHN DEERE 420/430/AL2118 D=55mm D=86mm H=20mm

SLEEVE WITH BEARING DEUTZ - FENDI - MASSEY F. - FIAT D=65mm D=97mm H=23mm

FIAT 130 NC NT CLUTCH HANDLE D=55mm D=92mm H=30

SLEEVE WITH BEARING FIAT 450/480/500/540/570/600/640/650/670/680/750/780/880/980/466/566/666/766 D=50mm D=89mm H=22mm

PRIMARY SHAFT ad. BENASSI RL95 Z=10/10 L=220mm

BEARING 4204 20x47x18

OIL SEAL 38x60x8 RP

OIL SEAL 38x50x8 RP

OIL SEAL 38x52x8 RP

OIL SEAL 35x50x8 RP

OIL SEAL 14x30x7 RP

OIL SEAL 22x33x8 RP

OIL SEAL 16x24x5 RP

PAIR OF ROLLER CUTTER ROLLERS FOR MOTOZAPPE ES= 36mm

PAIR OF ROLLER CUTTER ROLLERS FOR MOTOZAPPE ES= 35mm

PAIR OF ROLLER CUTTER ROLLERS FOR MOTOZAPPE ES= 30mm

PAIR OF MOWER ROLLERS FOR MOTOZAPES ES= 28mm

PAIR OF ROLLER CUTTER ROLLERS FOR MOTOZAPPE ES= 27mm

OIL SEAL 32x52x7 RP

OIL SEAL 15x40x8 RP

OIL SEAL 18x32x8 RP

OIL SEAL 35x60x10 RP

OIL SEAL 30x40x7 RP

OIL SEAL 35x52x7 RP

OIL SEAL 30x56x10 RP

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

OIL SEAL 28x52x10 RP

OIL SEAL 42x56x7 RP

OIL SEAL 48X68X10 RP

OIL SEAL 28x52x7 RP

OIL SEAL 15x32x7 RP

BEARING 4202 15x35x14

BEARING 3207 2RS 35x72x27

BEARING 2305 25x62x24

BEARING 6307 2RS 35x80x21

BEARING 6203 2RS 17x40x12

BEARING 6201 2RS 12x32x10

BEARING 6200 2RS 10x30x9

BEARING 6008 2RS 40x68x15

BEARING 6007 2RS 35x62x14

BEARING 6006 2RS 30x55x13

BEARING 6003 2RS 17x35x10

BEARING 6002 2RS 15x32x9

BEARING 6001 2RS 12x28x8

BEARING 6000 2RS 20x26x8

BEARING 32205 25X52X19.5

BEARING 32008 40X68X19

BEARING 30305 62X24X19

BEARING 30209 45X85X19

BEARING 30304 20X52X15

BEARING 30207 72x35x19

BRACKET FOR AIR FILTER 9 HP ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI MOTOR HOES PASBO BRUMI

CLUTCH DISC FOR MULTIDISCO clutches ad. BARBIERI FORT BENASSI SEP GOLDONI AND MISCELLANEOUS D=92mm Z=6

SPERONE TIMONE ad. GRILLO

SPERONE TIMONE ad. MOTOR HOE BRUMI SIMPLEX

SPERONE TIMONE ad. BRUMI UNIVERSAL

SPERONE TIMONE ad. PASBO G51

HEXAGONAL TUBE 38mm DIAMETER 27mm LENGTH 1MT

HEXAGONAL TUBE D=40mm d=32mm L=1MT

Bumper ad. BRUMI UNIVERSAL

HUB II/III ELEMENT ad. FORT ES=27

HUB I ELEMENT ad. FORT ES=27

MILLER SHAFT ad. SEP 140 MOTOAGRICOLA SEP 138 HEXAGONAL ES=35mm

FLANGE ad. MOTOR HOE PASBO G84

FLANGE ad. PASBO G14

RUBBER FOOTNOTE ad. PABO G51

EXTERNAL SCANALED HUB ad. PASBO G14/84/94 Z=8

UPPER CROWN Z=43 H51 PASBO G73

PAIR OF FIXED WHEELHOLDER MOUNTS ad. BENASSI ES=28

LATERAL HUB LAPS SUPPORT III ELEMENT ad. BRUMI REKORD MINIREKORD SIMPLEX ES=30

SIDE HUB SUPPORT III ELEMENT LAPS ad. BRUMI UNIVERSAL SPECIAL ES=27

TRIPLE GEAR ad. F&M R5 Z=45/39/35

FLANGE ad. PASBO G51 ROTARY TILLER FOR JLO152 ENGINE

LOWER CONICAL PAIR ad. BENASSI MECHANICAL BL75 Z=7/23

DOUBLE SLIDING GEAR ad. PASBO G84 Z=23/28

MILLER BEARING SHAFT ad. BENASSI RL15 L=320mm ES=35mm

CONICAL PAIR + MILLING SHAFT ad. MAG J52 Z=7/23

milling cutter shaft with square ad. MAG 2P

LOWER CONICAL PAIR ad. FORT LION UNIVERSAL Z=8/24

PINION ad. SHORT TYPE FORT TIGER Z=7

LOWER BODY ad. PASBO G14/84

MILLER HOLDING SHAFT ad. F&M R5 ES=27mm

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

BEVEL GEAR PAIR + MAG SHAFT J52

CONICAL PAIR ad. MAG Z=7/24

CONICAL PAIR ad. MAG Z80 Z=8/23

CLUTCH HUB ad. SEP 125 H=40mm Z=6 (13x13)

CLUTCH HUB ad. SEP 125 H=38mm Z=8 (15x12)

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15X12)

HUB II ELEMENT WITH BATTLE ad. MECC.BENASSI RL 300/304 ES=28

LEFT BRAKE HUB ad. SEP 115/125 ES=35mm

MULTIDISCO CLUTCH BELL H=70mm D=23mm

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

STEEL CLUTCH CONE ad. FORT TIGER Z=8 (15X12)

SMOOTH DISC ad. SEP 125 Z=4 (85X3)

RIGHT MILLER HUB ad. SEP 115/125 ES=35mm

ARM SUPPORT TIMONE ad. PASBO G72/73/83

ARM SUPPORT TIMONE ad. PASBO G14/84/94

CLUTCH DISCS WITH PARTICLES ad. FIAT SEAT D=216mm Z=20mm (23X20)

UPPER CROWN ad. CRICKET 9000R Z=6

DOUBLE GEAR ad. BRUMI SIMPLEX Z=31/36

BRUMI UNIVERSAL CLUTCH SHAFT Z=10

CLUTCH DISENGAGING LEVER ad. BRUMI UNIVERSAL

RETROMARCY PIN ad. PASBO G94

FIRST TREE ad. PASBO G62 Z=10

PRIMARY SHAFT ad. PASBO G73/83

LATERAL COVER ad. FORT TIGROTTO

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

FLANGE ad. PASBO G73

INTERNAL SCALED HUB ad. PASBO G14/84/94 Z=8

Bearing DHK 12/10 ad. PASBO G14

PASBO G51 CLUTCH FORK

RETROMARCY GEAR ad. PASBO G14 Z=15/18/26

RETROMARCY PIN ad. PASBO G14/73/72/83

MILLED SKATE ad. PASBO G73

PASBO G94 G14 CLUTCH CONE

PASBO CLUTCH CONE OLD TYPE G84/14 Z=6

SLIDING GEAR ad. PASBO G14 Z=23/28

SLIDING GEAR ad. PASBO 619 Z=38/43

PASBO G73 REVERSE GEAR Z=12/24

UPPER CROWN Z=43 H61 PASBO G73

UPPER CONICAL CROWN ad. PASBO G51 Z=63

LOWER CONICAL PAIR ad. F&M R5 450 Z= 7/27

LOWER CONICAL PAIR ad. F&M R5 430/440 Z=7/25

STEM LOCKING PIN WITH PUSH BUTTON

BENASSI SEP GEAR JOINT PAWL

TILLER PIN D=8X70

HEXAGONAL TUBE D=27mm D=19mm L=1MT

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

D=10x70 MOTOZAPPA PIN.

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC FOR DIESEL ad. BRUMI/BARBIERI FOR DIESEL ENGINES

CLUTCH LEVER WITH STATIONING ad. BRUMI/BARBIERI/SEP D=27mm

FIXED COUPLE ad. BRUMI UNIVERSAL SIMPLEX

COMPONENTS FOR CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

STEEL DISC ad. F&M D7

RAX 718 ad. PASBO G73/83

LOWER CONICAL PAIR ad. FORT TIGER Z=7/22

ANTIVIBRATING KNOB FOR MOTOZAPPA D=27mm

CLUTCH SPRING ad. MAG J52

TANK CAP ad. PASBO MIXTURE

CONICAL COUPLER LENGTH 180mm ad. BENASSI Z=7/24

6-HOLE CLUTCH RING FOR CONICAL CLUTCHES

UPPER CONICAL PAIR ad. F&M R5

LOWER BODY SEAL (0.5) ad. PASBO

ENGINE FLANGE GASKET ad. PASBO TILLER

milling cutter shaft ad. FORT TIGER DRILLED ES=27 REF. ORIG. 15-07-403339

REDUCTION GEAR ad. BRUMI UNIVERSAL Z=57

BRONZE BRAKE BRAKE BRAKE PAD ad. PASBO G72/73/83

LATERAL COVER ad. PASBO G73/83/94

RETROMARCY SPRING ad. PASBO G73/83/14

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15X12)

CLUTCH HUB ad. SEP VALPADANA 125 H=52mm Z=8 (15X12)

CLUTCH HUB ad. SEP 125 H=47mm Z=8 (15x12)

CLUTCH HUB ad. BRUMI SIMPLEX FORT MONODISCO/BIDISCO H=42mm Z=6 (14x11)

REPAIR FRESH AXIS ad. PASBO G14/84/94 G83 ES=30

CLUTCH CONE ad. BRUMI SIMPLEX 1ST SERIES

BEARING 30204 20X47X15.25

NAZ BEARING K 10 16 12 ad. PASBO G73/83

NKI 25/30 BRUMI SIMPLEX BEARING

OIL SEAL ad. BRUMI SIMPLEX 35x62x8 RP

BEARING 6207 MAG J72 Z80 35X72X17

UNIVERSAL BEARING 32007 BRUMI SIMPLEX REKORD 35X62X18

BEARING 6009 2RS 45X75X16 CFC FOR PASBO G72/G73/G83/G84/G94 MILLING SHAFT

CLUTCH DISC D=140mm Z=10 (26X21)

CONICAL PAIR ad. IMER Z=9/34

TRANSMISSION COMPLETE CLUTCH BRUMI UNIVERSAL PACK 10 PIECES

COMPLETE GAS TRANSMISSION BRUMI/PASBO PACK 10 PIECES

CLUTCH BELL ad. PASBO G73 FOR JLO 101/152 CM

FLANGE SEAL ad. PASBO FOR JLO/CM ENGINE

OIL LEVEL CAP ad. PASBO

CUTTER SHAFT SHAFT ad. FORT TIGROTTO PERFORATED ES=27 L= 260mm ORIGIN REF. 15-07-403339

FIXED COUPLE ad. BRUMI REKORD

TURNING CUP ad. BRUMI REKORD

SIMPLEX CLUTCH BELL 1ST SERIES Z=6

RUBBER CANDLE PIPE FOR MOTOZAPPE D=5mm

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

BEARING ad. BENASSI BARBIERI BRUMI FORT D=49mm D=24mm

TERMINAL DISC ad. F&M D7 D=108mm Z=8

CLUTCH RING 4 HOLES ad. CRICKET 11,000 AND VARIOUS

CLUTCH DISCS WITH PARASTRAPPI ad. BARBIERI LEOPARD FB 1400 S. SPECIAL D=157mm Z=10 (19X15)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=132mm Z=15 (24X21)

LOW HUB CLUTCH DISC ad. CASORZO CU7 D=110mm Z=6 (30X26)

HIGH MOTION CLUTCH DISC ad. CASORZO CU6 D=110mm Z=6 (30X26)

DOUBLE GEAR ad. BRUMI SIMPLEX 31/36

SHIFT LEVER BELLOW ad. BRUMI UNIVERSAL SPECIAL

PRIMARY SHAFT ad. BENASSI RL15 Z=13

RIGHT SLEEVE ad. MAG/COTIEMME/MINARELLI

LOWER CONICAL PAIR ad. PASBO G14 Z=9/32

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I125/150 D=88/91mm

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I80/90 D=81mm

MARMIT ad. BRUMI JLO L101/125/152 BETA 210

MARMIT ad. PASBO JLO 152 N.T.

POWER MODULE FOR POWER TILLERS

HEXAGONAL AXIS ad. PASBO G14 ES=30 L=300 mm HOLE INTERAX 247mm

HEXAGONAL AXIS ad. PASBO G14 ES=30 L=290mm HOLE INTERAX 237mm

HEXAGONAL AXIS ad. PASBO G72/73/83 ES=27 L=300mm HOLE INTERAXIS 247mm

HEXAGONAL AXIS ad. PASBO G72/73/83 ES=27 L=290mm HOLE INTERAXIS 237mm

TIMONE FORK PIN ad. PASBO AND MISCELLANEOUS

DIFFERENTIAL CRICKET HUB COUPLE ad. PASBO BRUMI AND MISCELLANEOUS ES=35

COUPLE CRICKET HUB PITCH HUBS ad. PASBO BRUMI AND MISCELLANEOUS ES=27

LOWER BODY ad. PASBO G72/73/83/94

LOWER CONICAL PAIR ad. PASBO G72/73/83 Z=8/33

FIRST TREE ad. PASBO G31/51/71 Z=10

SECONDARY SHAFT ad. PASBO G94 Z=10

PRIMARY SHAFT ad. PASBO G94 Z=13/17/21

CROWN HOLDING AXIS ad. PASBO G14 ES=30 L=140mm

FLANGE ad. PASBO G94

UPPER BODY ad. PASBO G51

CROWN HOLDING AXIS ad. PASBO G94 ES=30 L=130mm

CORONA BRACKET AXIS ad. PASBO G51/72/73/83 ES=27

milling shaft wrench ad. PASBO G14/73/83/91

DOUBLE SLIDING GEAR ad. PASBO G73 Z=17/19

TRIPLE SLIDING GEAR ad. PASBO G94 Z=31/35/39

DOUBLE GEAR ad. PASBO G72/73 Z=28/32

RETROMARCY GEAR Z=13/20 ad. PASBO G94

CLUTCH FORK ad. PASBO G72/73/83

CLUTCH FORK ad. PASBO G14/84/94

CLUTCH CONE ad. PASBO Z=12 G72/73/83

CLUTCH CONE ad. PASBO Z=6 G31/41/51

CLUTCH BELL ad. PASBO G14/84/94

DIESEL ATTACHMENT CLUTCH BELL ad. PASBO G72/73/83

CLUTCH RING ad. PASBO G51

POWER TAKE-OFF COVER ad. PASBO G14/94

CLUTCH RING ad. PASBO G72/73/83

RAX 718 ad. PASBO G73/83

NIGHT MARCHES ad. PASBO

EXTERNAL SCANALED HUB ad. PASBO G14/84/94 Z=8

WOLF FELT DUST PROOF ad. PASBO G14/51/72/73/83/84/94 D=45x62x5mm

LABYRINTH DISC ad. PASBO G72/G73 D=45/62mm

BLOCKING PIN ad. PASBO G14/51/72/94 D=16mm

NUT BLOCK ad. PASBO G14/51/72/94 D=16mm

GALVANIZED PIN HANDLE ad. PASBO G14/51/72/94 D=8mm

POWER TAKE-OFF COVER ad. PASBO G72/73

SHORT CONICAL FIXED PIN ad. PASBO G72/73/83

BRONZE CLUTCH PADS ad. PASBO G72/73/83

REPAIR FRESH AXIS ad. PASBO G14/84/94 G83 ES=30

REPAIR FRESH AXIS ad. PASBO G51/72/73/83 ES=27

CLUTCH SPRING ad. PASBO G14/84/94

CLUTCH SPRING ad. PASBO G51

CLUTCH SPRING ad. PASBO G72/G73/G83

LOWER BODY GASKET ad. PASBO G14/51/62/72/73/83/84/94

LOWER FLANGE SEAL ad. PASBO G51/62/72/73/83/84/94

CLUTCH WASHER ad. BRUMI UNIVERSAL

BRACKET FOR AIR FILTER Hp 7 ad. BRUMI JLO101/152

SWIVEL COUPLE ad. BRUMI UNIVERSAL SIMPLEX

CLUTCH FORK ad. BRUMI SIMPLEX

CONICAL PAIR ad. F&M L300 Z=7/22

CONICAL PAIR ad. MAG J72 Z=8/18

CONICAL PAIR ad. MAG Z=7/26

MILLER BEARING SHAFT ad. IMER ES=27

CONICAL PAIR ad. IMER Z=9/27

SLIDING GEAR ad. CRICKET 11000/11500 REF. ORIG. 21201

PRIMARY SHAFT Z=8/8/12/17 ad. CRICKET 11000/11500 REF. ORIG. 21198

PRIMARY SHAFT + SLIDING GEAR ad. CRICKET 11000/11500 Z=8/8/12/17 REF. ORIG. 21198

MILLER BRACKET SHAFT ad. CRICKET 11000 ES=27 REF. ORIG. 11383

CONICAL PAIR ad. GRILLO Z=8/30

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON MAJOR Z=12

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON 22 Z=10/18/20

milling cutter shaft ad. GRYPHON 22 LONG TYPE ES=27

milling cutter shaft ad. GRYPHON 22 SHORT TYPE ES=27

CONICAL PAIR ad. GRYPHON 22 Z=7/23

CUTTER SHAFT SHAFT ad. FORT TIGROTTO ES=27 L=300mm ORIG. REF. 15-07-403339

MILLING SHAFT TREE ad. FORT LION ES=35

UPPER CONICAL PAIR ad. BRUMI SIMPLEX

CONICAL PAIR ad. BRUMI UNIVERSAL Z=7/22 ES=27

CONICAL PAIR ad. BRUMI FLEA Z=10/18 ES=19

CONICAL PAIR ad. BRUMI SIMPLEX Z=7/23 ES=30

CONICAL PAIR ad. BRUMI REKORD Z=8/26 ES=30

CONICAL PAIR ad. BRUMI MINIREKORD Z=9/30 ES=30

CONICAL PAIR ad. BARBIERI ZEBRA Z=8/27

CONICAL COUPLE UNDERCHIOMA MULETTO ad. BRUMI Z=8/26 ES=32

LOWER CONICAL PAIR ad. BARBIERI GHEPARD Z=7/24 REF. ORIG. 6802502+680250

DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=13/27/31

PRIMARY TREE ad. BARBERS GAZELLE Z=9/9/13/18

PRIMARY SHAFT + DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=9/9/13/18 Z=13/27/31

MILLER SHAFT TREE ad. BARBIERI CONDOR ES=27 REF. ORIG. 01014

LOWER CONICAL PAIR ad. BARBIERI CORTINA Z=7/21 REF. ORIG. 1306009-30026

LOWER CONICAL PAIR ad. BARBIERI CONDOR 27 Z=9/27 REF. ORIG. 01011+01012

LOWER CONICAL PAIR ad. BARBIERI CONDOR ES=35 Z=9/27 REF. ORIG. 04062-01011

milling cutter shaft ad. MAB T4

CONICAL PAIR ad. MAB T4 BONORI Z=8/28

CONICAL PAIR ad. MAB T4 BONORI Z=7/25

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

CLUTCH SLEEVE ad. F&M L300 D=50mm d=22mm

SPINGIDISCO LEVER CLUTCH ad. F&M L300 D=160mm

CLUTCH REVISION KIT ad. CRICKET 9000R MAB AND VARIOUS BRANDS

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

DIAFRAM CLUTCH SPINGIDISCO ad. GRILLE 131 D=160mm

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

LAMELLAR CLUTCH ad. F&M R5 Z=9 (17x14)

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

CONICAL CLUTCH ad. F&M R5 DIESEL H=85mm Z=9 (17x14)

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. SEP 125 D=88x11.5mm Z=15

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. OLD BARBIERI TYPE CONDOR FORT D=110mm d=32mm

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

CLUTCH DISC ad. F&M R5 D=94m Z=9 (17x15)

MONODISCO/BIDISCO CLUTCH DISCS ad. BRUMI SIMPLEX FORT D=94m Z=8 (15X13)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH DISC DISC DISC ad. MAB T4 ADRIATICA

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

CLUTCH DISC ad. MOTOCOLTIVATOR GRILLE 131 D=160mm Z=6 (16x13)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. MOTOZAPPA CASORZO SU4 VIGNETO D=145mm Z=10 (26X21)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

MARMIT ad. RUGGERINI RD/RF 80/81/90/120/901 MC 71 REF. ORIG. 526.42

MARMIT ad. MINARELLI I 160

MARMIT ad. FOXES & BOTTOLS

MARMIT ad. CM46

MARMIT PROTECTION ad. CM 101/125/152 JLO 101/125/197/152

MARMIT ad. MINSEL ENGINE M100 M160 M165

MARMIT ad. ZANETTI D120

MARMIT ad. MINARELLI I150

MARMIT ad. MINARELLI I125

MARMIT ad. BRUMI JLO L101/125/152 BETA 210

MARMIT ad. PASBO JLO 152 N.T.

FULL PISTON ad. ACME D=72mm

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=103mm ORIGINAL REF. 6502.072.091

COMPLETE PISTON ad. RUGGERINI ACME ADN CENTRAL CHAMBER D=85.50mm

CYLINDER HEAD ad. JLO 125 CM 125 REF. ORIG. 125.07.005.000

FULL PISTON ad. MINSEL M100 D=50mm

FULL PISTON ad. MINARELLI I160 D=57.80mm

FULL PISTON ad. MINARELLI I160 D=57.40mm

FULL PISTON ad. MINARELLI I160 D=57mm

FULL PISTON ad. MINARELLI I150 D=40mm

FULL PISTON ad. BETA B 140/147 D= 58.4mm

FULL PISTON ad. BETA B 140/147 D= 58.8mm

FULL PISTON ad. BETA B 140/147 D= 59.6mm

KIT COMPLETE CYLINDER + PISTON ad. JLO 101 CM D=50mm REF. ORIG. 315.07.002.11

KIT COMPLETE CYLINDER + PISTON ad. JLO CM 152 MINSEL M150 D=61 INTERCHANGEABLE TO D=59mm ORIG. REF. 152.07.801.21

PLASTIC AIR FILTER ad. MIXTURE ENGINES 3HP 5

OIL BATH AIR FILTER ad. SMALL MIXTURE ENGINES 3HP 5

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L70 LA178

BATH OIL BATH AIR FILTER ASPIRATION COLLECTOR ad.YANMAR KAMA VULCAN AND VARIOUS MADE IN CHINA L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L100 LA186

CARBURATOR TUBE FITTING BING 1/19 1/23 ad. JLO 101/125/152 197 9 HP

UNIVERSAL ALUMINUM DOUBLE BODY BRUSHCUTTER HEAD

SPRING FOR CARBURATOR 1/19 BING ad. JLO 101/125/152

EXTERNAL FILTER FOR 2T ENGINES

CARBURATOR INLET COLLECTOR BING 1/19 ad. JLO 101/125/152 H=52

CARBURATOR FHC 20.16 ad. MINARELLI I125 VERS. MOTOZAPPA

CARBURATOR 1/23 BING ad. JLO 197 9 HP

CARBURATOR 1/19 BING ad. JLO 101/125/152

POWER TUBE ad. LOMBARDINI AND VARIOUS ENGINES 14mm DIAMETER LENGTH 45.57cm

MINSEL M100 - M150 - M165 RECOIL STARTER KIT

CONDENSER ad. JLO 101/152

CONTACT ad. JLO 101/152

M10 X 1 HORIZONTAL POMBLE TAP ad. CM MOTORS AND VARIOUS

EXTERNAL ELECTRONIC CURRENT CURRENT ELECTRONIC POWER BOB ad. MINARELLI DUCATI ZANETTI 175 A165 B120 MINSEL M 100/150/165

EXTERNAL COIL ad. MINARELLI ZANETTI

INTERNAL COIL ad. MINARELLI ZANETTI

ELECTRICAL POWER PLUG BOB ad. MINARELLI I50/80/85

ELECTRICAL POWER PLUG BOB ad. MINARELLI I150

COIL ad. MINARELLI I160 ORIGINAL SAPRISA

ELECTRIC COIL ad. JLO 152 ORIGINAL

INTERNAL ELECTRONIC CENTRAL BOOSTING BOOST ad. JLO CM 101/125/152

ELECTRIC COIL WITH PICK UP ad. BETA B 155/175/205/210

CONDENSER ad. BETA B140

UNIVERSAL FUEL TANK KIT UNIVERSAL MIXTURE ENGINES AND COMPATIBLE MODELS

Electrical Material

ELECTRONIC CENTRAL COIL ad. B90/110 TECUMSEH

COIL ad. KOHLER CH440 CH395

ELECTRONIC COIL ad. CM 152

ELECTRONIC COIL ad. CM 46/80/90

SELF-AVOLVING PULLEY STARTING ad. JLO101/125/152 AND CM ENGINES

CONTACT RUTTOR ad. MINARELLI I 125

POWER MODULE FOR POWER TILLERS

COIL ad. OLEOMAC

ORIGINAL ELECTRONIC CONTROL UNIT COIL PVL MINSEL M 100/150/165

SELF-AVOLVING SPRING ad. JLO 101/125/152

START CRICKET ad. JLO 101/125/152

DELL'ORTO CARBURATOR SHA 14.12 P MOTOZAPPA VERSION ad. CM 46/80/90 MINARELLI BETA DUCATI

FULL PISTON ad. MINSEL M100 1st MAJOR D=50.40mm

MARMIT ad. MINARELLI I90

AIR FILTER ad. ACME ALN 290

BRACKET FOR AIR FILTER 9 HP ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI MOTOR HOES PASBO BRUMI

PLASTIC AIR FILTER ad. MIXTURE ENGINES 3HP 5

MARMIT ad. MORINI

OIL BATH AIR FILTER ad. SMALL MIXTURE ENGINES 3HP 5

STARTING PULLEY ad. JLO 152 OLD TYPE FOR STEEL DUNES.

COMPLETE GASKET SERIES ad. INTERMOTOR IM 250/251/2

FILTER MASS FOR HP 9 MIXTURE

MARMIT ad. MINARELLI I 160

SEGMENT SERIES ad. INTERMOTOR IM350 D=83mm

ELECTRONIC CENTRAL COIL ad. B90/110 TECUMSEH

MARMIT ad. LOMBARDINI LA400/490 FRT RUGGERINI RD/RF 80/81/90/120/901

MARMIT ad. FOXES & BOTTOLS

MARMIT ad. CM46

MARMIT PROTECTION ad. CM 101/125/152 JLO 101/125/197/152

MARMIT ad. MINSEL ENGINE M100 M160 M165

2T OIL 1 LT PETROL/DIESEL PACK

DELL'ORTO CARBURATOR FHCD 20.16 LOW ALBERIN ad. MINARELLI I125 ZANETTI MORINI REF. ORIG. 7386

CARBURATOR DELL'ORTO SHA 14.14 L ad. ENGINE CM MOTORS REF. ORIG. 1732

DELL'ORTO CARBURATOR FHE 22.19 MOTOZAPPA VERSION ad. MINARELLI I160/190 ZANETTI A175 REF.ORIG. 7520

DELL'ORTO CARBURATOR FHCD 20.16 ad. DUCATI MAPLE REF. ORIG. 7362

CYLINDER HEAD GASKET ad. COTIEMME A180/A220

TANK CAP FOR DECESPUGGER ad. KAWASAKI

COIL ad. KOHLER CH440 CH395

COMPLETE GASKET SERIES ad. ENGINE JLO L197

CLUTCH LEVER WITHOUT LOCK D=27mm

FULL PISTON ad. BETA INTERMOTOR B 140 D=58mm

CARBURATOR BURGEON SPURGE SCREW 1/19 1/23 BING ad. JLO CM 101/125/152/197 MINSEL M100/150/165 MINARELLI

UNIVERSAL ALUMINUM DOUBLE BODY BRUSHCUTTER HEAD

COMPLETE GASKET SERIES ad. MINARELLI I/190

RUBIN ad. ROBIN EH12

RUBIN ad. ROBIN EY20

TANK CAP ACME ALN 290

MINIMUM JET 110 CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI

MAX JET 45 FOR CARBURATOR 1/23 BING ad. JLO 197 9 HP BETA B 205/210

CURVE FOR CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI FOR AGRIA.

MINIMUM JET 45 CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI

MARMIT ad. ZANETTI D120

BING CARBURETTOR GASKET 1/19 ad. JLO 101/125/152

BING CARBURETTOR PULLEY 1/19 ad. JLO 101/125/152

CONICAL PIN FOR CARBURATOR BING 1/19 ad. JLO 101/125/152

GAS VALVE SPILL FOR CARBURATOR BING 1/19 ad. JLO 101/125/152

AGITATOR FOR CABURATOR BING 1/19 ad. JLO 101/125/152

ELECTRICAL CENTRAL BOB ad. BETA B90 B110 B140 B150

ELECTRICAL CENTRAL BOB ad. JLO101 JLO125 CM101 CM125

ORIGINAL ELECTRONIC CONTROL UNIT COIL INTERMOTOR IM250/300/350 LGA225/226/340

CLUTCH BELL ad. PASBO G73 FOR JLO 101/152 CM

AUTOAVOLGENT ad. STIHL 018 E 180

ELECTRONIC COIL ad. CM 152

SELF-AVOLVING ad. STIHL MS230 ED 023

UNIVERSAL 2-WAY PASS-THROUGH OIL FILTER

CARBURATOR TUBE FITTING BING 1/19 1/23 ad. JLO 101/125/152 197 9 HP

MINSEL M100 - M150 - M165 RECOIL STARTER KIT

CONDENSER ad. JLO 101/152

CONTACT ad. JLO 101/152

COVER WITH ICE FOR CARBURATOR BING ad. JLO 1/19 1/23

BIELLA ad. CM 46

ELECTRONIC COIL ad. CM 46/80/90

UNIVERSAL ALUMINUM DOUBLE BODY BRUSHCUTTER HEAD

CYLINDER HEAD ad. JLO 125 CM 125 REF. ORIG. 125.07.005.000

M10 X 1 HORIZONTAL POMBLE TAP ad. CM MOTORS AND VARIOUS

SELF-AVOLVING PULLEY STARTING ad. JLO101/125/152 AND CM ENGINES

CONTACT RUTTOR ad. MINARELLI I 125

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I125/150 D=88/91mm

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I80/90 D=81mm

MARMIT ad. MINARELLI I150

MARMIT ad. MINARELLI I125

MARMIT ad. BRUMI JLO L101/125/152 BETA 210

MARMIT ad. PASBO JLO 152 N.T.

POWER MODULE FOR POWER TILLERS

COIL ad. OLEOMAC

ORIGINAL ELECTRONIC CONTROL UNIT COIL PVL MINSEL M 100/150/165

EXTERNAL ELECTRONIC CURRENT CURRENT ELECTRONIC POWER BOB ad. MINARELLI DUCATI ZANETTI 175 A165 B120 MINSEL M 100/150/165

EXTERNAL COIL ad. MINARELLI ZANETTI

INTERNAL COIL ad. MINARELLI ZANETTI

ELECTRICAL POWER PLUG BOB ad. MINARELLI I50/80/85

ELECTRICAL POWER PLUG BOB ad. MINARELLI I150

COIL ad. MINARELLI I160 ORIGINAL SAPRISA

ELECTRIC COIL ad. JLO 152 ORIGINAL

INTERNAL ELECTRONIC CENTRAL BOOSTING BOOST ad. JLO CM 101/125/152

ELECTRIC COIL WITH PICK UP ad. BETA B 155/175/205/210

FULL PISTON ad. MINSEL M100 D=50mm

FULL PISTON ad. MINARELLI I160 D=57.80mm

FULL PISTON ad. MINARELLI I160 D=57.40mm

FULL PISTON ad. MINARELLI I160 D=57mm

FULL PISTON ad. MINARELLI I150 D=40mm

FULL PISTON ad. BETA B 140/147 D= 58.4mm

FULL PISTON ad. BETA B 140/147 D= 58.8mm

FULL PISTON ad. BETA B 140/147 D= 59.6mm

KIT COMPLETE CYLINDER + PISTON ad. JLO 101 CM D=50mm REF. ORIG. 315.07.002.11

KIT COMPLETE CYLINDER + PISTON ad. JLO CM 152 MINSEL M150 D=61 INTERCHANGEABLE TO D=59mm ORIG. REF. 152.07.801.21

SELF-AVOLVING SPRING ad. JLO 101/125/152

START CRICKET ad. JLO 101/125/152

CONDENSER ad. BETA B140

SPRING FOR CARBURATOR 1/19 BING ad. JLO 101/125/152

EXTERNAL FILTER FOR 2T ENGINES

CARBURATOR INLET COLLECTOR BING 1/19 ad. JLO 101/125/152 H=52

CARBURATOR FHC 20.16 ad. MINARELLI I125 VERS. MOTOZAPPA

CARBURATOR 1/23 BING ad. JLO 197 9 HP

CARBURATOR 1/19 BING ad. JLO 101/125/152

UNIVERSAL FUEL TANK KIT UNIVERSAL MIXTURE ENGINES AND COMPATIBLE MODELS

GX 340/ 370/ 390

MARMIT ad. HONDA GX340/390

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX340/390

TANK WITH CAP + FILTER ad. HONDA GX340/390

FILTER ELEMENT ad. HONDA GX340/390

FULL PISTON ad. HONDA GX 340/390 STD D=82mm

COMPLETE CARBURATOR ad. HONDA GX 340/370

COMPLETE CARBURATOR ad. HONDA GX 390

ELECTRONIC COIL ad. HONDA GX 340/390

CAMMES SHAFT ad. HONDA GX340/GX370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

GX 120/ 160/ 200

CYLINDER HEAD ad. HONDA E MADE IN CHINA GX160

FAN ad. HONDA GX160/200

PUNTERIA COVER ad. HONDA GX 120/160/200

EXHAUST VALVE GUIDE ad. HONDA GX160

ELECTRONIC COIL ad. HONDA GCV 160

COMPLETE SELF-AVOLVING ad. HONDA GXV 120/140/160

ELECTRONIC COIL ad. HONDA GXV 160/200

ELECTRONIC COIL ad. HONDA GXV 140

ALUMINIUM BLADE ad. HONDA GX 160/200

SEGMENT SERIES ad. HONDA GX 160/200 STD D=68mm ORIGIN REF. 480.1002

COMPLETE GASKET SET ad. HONDA GX 160/200 REF. ORIG. 180.994

PUNTERIA COVER WITH VALVE LIFT ad. HONDA GX 120/160/200

COMPLETE CARBURATOR ad. HONDA GX 160 REF. ORIG. 180.373

CARBURATOR ad. HONDA GCV 160

VALVE GUIDE ad. HONDA GX 160/200 GXV 160

EXHAUST VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14721-ZF1-000

ASPIRATION VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14711-ZF1-000

OIL SENSOR DEVICE ad. HONDA GX 120/160/200/240/270/340/370

ENGINE STOP SWITCH ad. HONDA GX 120/160/200/240/270/340/370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

ELECTRONIC COIL ad. HONDA GX 120/160/200 REF. ORIG. 179.981

SELF-AVOLVING SPRING ad. HONDA GX 120/160/200 REF. ORIG. 180.1025

COMPLETE SELF-AVOLVING + COUPLE ad. HONDA GX 160/200

MARMIT ad. HONDA GX 120/160/200 REF. ORIG. 180.032

COMPLETE DRY AIR FILTER ad. HONDA GX 120/160/200 REF. ORIG. 30.244

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

TANK WITH CAP ad. HONDA GX 160/200 REF. ORIG. 180.035

COMPLETE PETROL ENGINE 9 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH ELECTRIC START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

ALUMINIUM CYLINDER BOTTLE ad. HONDA GX 240/270

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

TANK CAP ad. HONDA GX 240/270

CARBURATOR FOR GENERATOR ad. HONDA GX240

CARBURATOR ad. HONDA GX240

DISCHARGE VALVE GUIDE ad. HONDA GX240/270

INLET VALVE GUIDE ad. HONDA GX240/270

MARMIT ad. HONDA GX 240/270

COMPLETE GASKET SERIES ad. HONDA GX 240/270

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

SEGMENT SERIES ad. HONDA GX 240/270 STD D=76

COMPLETE GASKET SERIES ad. HONDA GX 240/270

PUNTERIA COVER ad. HONDA GX 240/270/340

COMPLETE CARBURATOR ad. HONDA GX 270

EXHAUST VALVE ad. HONDA GX 240/270 REF. ORIG. 14721-ZE2-000

ASPIRATION VALVE ad. HONDA GX 240/270 REF. ORIG. 14711-ZE2-000

ENGINE STOP SWITCH ad. HONDA GX 120/160/200/240/270/340/370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

ELECTRONIC COIL ad. HONDA GX 240/270

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

DRY AIR FILTER ad. ENGINE HONDA GX 240 270

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

TANK WITH CAP ad. HONDA GX 240/270

ENGINE FLANGE ad. HONDA GX270

COMPLETE PETROL ENGINE 7 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX210 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH ELECTRIC START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

MARMIT ad. HONDA GX340/390

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX340/390

TANK WITH CAP + FILTER ad. HONDA GX340/390

RPM GEAR ADJUSTMENT ad. HONDA GX160

RPM GEAR ADJUSTMENT ad. HONDA GX240

HONDA GXV270 STARTER PULLEY

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

OIL BATH AIR FILTER ad. SMALL MIXTURE ENGINES 3HP 5

FILTER ELEMENT ad. HONDA GX340/390

FILTER ELEMENT ad. HONDA MD-646

CYLINDER HEAD ad. HONDA E MADE IN CHINA GX160

FULL PISTON ad. HONDA GX 340/390 STD D=82mm

ALUMINIUM CYLINDER BOTTLE ad. HONDA GX 240/270

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

TANK CAP ad. HONDA GX 240/270

FAN ad. HONDA GX160/200

COMPLETE CARBURATOR ad. HONDA GX 390

ELECTRONIC COIL ad. HONDA GX 340/390

CARBURATOR FOR GENERATOR ad. HONDA GX240

PUNTERIA COVER ad. HONDA GX 120/160/200

GENERATOR TAPS ad. HONDA AND MISCELLANEOUS

CARBURATOR DECESPELLER ad. HONDA GX35

CARBURATOR ad. HONDA GX240

ELECTRONIC COIL ad. HONDA GX35

EXHAUST VALVE GUIDE ad. HONDA GX160

DISCHARGE VALVE GUIDE ad. HONDA GX240/270

INLET VALVE GUIDE ad. HONDA GX240/270

CARBURATOR DECESPELLER ad. HONDA GX25

MARMIT ad. HONDA GX 240/270

COMPLETE GASKET SERIES ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GCV 160

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

COMPLETE SELF-AVOLVING ad. HONDA GXV 120/140/160

ELECTRONIC COIL ad. HONDA GXV 160/200

ELECTRONIC COIL ad. HONDA GXV 140

CAMMES SHAFT ad. HONDA GX340/GX370

ALUMINIUM BLADE ad. HONDA GX 160/200

SEGMENT SERIES ad. HONDA GX 240/270 STD D=76

SEGMENT SERIES ad. HONDA GX 160/200 STD D=68mm ORIGIN REF. 480.1002

COMPLETE GASKET SET ad. HONDA GX 160/200 REF. ORIG. 180.994

COMPLETE GASKET SERIES ad. HONDA GX 240/270

PUNTERIA COVER ad. HONDA GX 240/270/340

PUNTERIA COVER WITH VALVE LIFT ad. HONDA GX 120/160/200

COMPLETE CARBURATOR ad. HONDA GX 270

COMPLETE CARBURATOR ad. HONDA GX 160 REF. ORIG. 180.373

CARBURATOR ad. HONDA GCV 160

PANEL FILTER ELEMENT ad. HONDA GX 100 GCV 135/160/190

VALVE GUIDE ad. HONDA GX 160/200 GXV 160

EXHAUST VALVE ad. HONDA GX 240/270 REF. ORIG. 14721-ZE2-000

ASPIRATION VALVE ad. HONDA GX 240/270 REF. ORIG. 14711-ZE2-000

EXHAUST VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14721-ZF1-000

ASPIRATION VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14711-ZF1-000

OIL SENSOR DEVICE ad. HONDA GX 120/160/200/240/270/340/370

ENGINE STOP SWITCH ad. HONDA GX 120/160/200/240/270/340/370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

ELECTRONIC COIL ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GX 120/160/200 REF. ORIG. 179.981

SELF-AVOLVING SPRING ad. HONDA GX 120/160/200 REF. ORIG. 180.1025

COMPLETE SELF-AVOLVING + COUPLE ad. HONDA GX 160/200

COMPLETE SELF-AVOLVING ad. HONDA GCV135/160

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

DRY AIR FILTER ad. ENGINE HONDA GX 240 270

MARMIT ad. HONDA GX 120/160/200 REF. ORIG. 180.032

COMPLETE DRY AIR FILTER ad. HONDA GX 120/160/200 REF. ORIG. 30.244

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

PLASTIC TANK CAP ad. HONDA GX 35

PLASTIC TANK CAP ad. HONDA GXV 160

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

TANK WITH CAP ad. HONDA GX 160/200 REF. ORIG. 180.035

TANK WITH CAP ad. HONDA GX 240/270

ENGINE FLANGE ad. HONDA GX270

IM 250/ 300/ 350

COMPLETE GASKET SERIES ad. ENGINE INTERMOTOR IM 350 351 352

PIPETTA CANDELA ad. LOMBARDINI INTERMOTOR

CONDENSER ad. LOMBARDINI INTERMOTOR

CONTACT ad. LOMBARDINI INTERMOTOR

2-WAY PETROLEUM PETROL TAP ad. INTERMOTOR

MARMIT ad. INTERMOTOR IM 300/350

COMPLETE GASKET SERIES ad. ENGINE INTERMOTOR IM 350 351 352

FULL PISTON ad. BETA INTERMOTOR B 140 D=58mm

PIPETTA CANDELA ad. LOMBARDINI INTERMOTOR

CONDENSER ad. LOMBARDINI INTERMOTOR

CONTACT ad. LOMBARDINI INTERMOTOR

2-WAY PETROLEUM PETROL TAP ad. INTERMOTOR

MARMIT ad. INTERMOTOR IM 300/350

FULL PISTON ad. MINSEL M100 1st MAJOR D=50.40mm

COMPLETE PETROL ENGINE 7 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX210 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH ELECTRIC START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

MARMIT ad. HONDA GX340/390

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX340/390

TANK WITH CAP + FILTER ad. HONDA GX340/390

MARMIT ad. MORINI

OIL BATH AIR FILTER ad. SMALL MIXTURE ENGINES 3HP 5

FILTER ELEMENT ad. HONDA GX340/390

FILTER ELEMENT ad. HONDA MD-646

CYLINDER HEAD ad. HONDA E MADE IN CHINA GX160

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

COMPLETE CARBURATOR ad. HONDA GX 340/370

TANK CAP ad. HONDA GX 240/270

CYLINDER HEAD GASKET ad. ASPERA

ASPERA 25 AND 35 GASKET SERIES

COMPLETE GASKET SERIES ad. MINARELLI I/190

COMPLETE CARBURATOR ad. HONDA GX 390

ELECTRONIC COIL ad. HONDA GX 340/390

CARBURATOR FOR GENERATOR ad. HONDA GX240

PUNTERIA COVER ad. HONDA GX 120/160/200

GENERATOR TAPS ad. HONDA AND MISCELLANEOUS

COMPLETE GASKET SERIES ad. LOMBARDINI LA LAL400 ENGINE

MARMIT ad. ZANETTI A 175

ORIGINAL ELECTRONIC CONTROL UNIT COIL INTERMOTOR IM250/300/350 LGA225/226/340

CARBURATOR DECESPELLER ad. HONDA GX35

CARBURATOR ad. HONDA GX240

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

ELECTRONIC COIL ad. HONDA GX35

EXHAUST VALVE GUIDE ad. HONDA GX160

DISCHARGE VALVE GUIDE ad. HONDA GX240/270

INLET VALVE GUIDE ad. HONDA GX240/270

CARBURATOR DECESPELLER ad. HONDA GX25

AUTOAVOLGENT ad. STIHL 018 E 180

MARMIT ad. HONDA GX 240/270

ELECTRONIC COIL ad. CM 152

COMPLETE GASKET SERIES ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GCV 160

SELF-AVOLVING ad. STIHL MS230 ED 023

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

COMPLETE SELF-AVOLVING ad. HONDA GXV 120/140/160

ELECTRONIC COIL ad. HONDA GXV 160/200

ELECTRONIC COIL ad. HONDA GXV 140

UNIVERSAL 2-WAY PASS-THROUGH OIL FILTER

CAMMES SHAFT ad. HONDA GX340/GX370

BIELLA SALICE ad. DUCATI

TANK CAP ad. TECUMSEH/BETA

ALUMINIUM BLADE ad. HONDA GX 160/200

SEGMENT SERIES ad. HONDA GX 240/270 STD D=76

SEGMENT SERIES ad. HONDA GX 160/200 STD D=68mm ORIGIN REF. 480.1002

COMPLETE GASKET SET ad. HONDA GX 160/200 REF. ORIG. 180.994

COMPLETE GASKET SERIES ad. HONDA GX 240/270

PUNTERIA COVER ad. HONDA GX 240/270/340

PUNTERIA COVER WITH VALVE LIFT ad. HONDA GX 120/160/200

COMPLETE CARBURATOR ad. HONDA GX 270

COMPLETE CARBURATOR ad. HONDA GX 160 REF. ORIG. 180.373

CARBURATOR ad. HONDA GCV 160

PANEL FILTER ELEMENT ad. HONDA GX 100 GCV 135/160/190

VALVE GUIDE ad. HONDA GX 160/200 GXV 160

EXHAUST VALVE ad. HONDA GX 240/270 REF. ORIG. 14721-ZE2-000

ASPIRATION VALVE ad. HONDA GX 240/270 REF. ORIG. 14711-ZE2-000

EXHAUST VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14721-ZF1-000

ASPIRATION VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14711-ZF1-000

OIL SENSOR DEVICE ad. HONDA GX 120/160/200/240/270/340/370

ENGINE STOP SWITCH ad. HONDA GX 120/160/200/240/270/340/370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

ELECTRONIC COIL ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GX 120/160/200 REF. ORIG. 179.981

SELF-AVOLVING SPRING ad. HONDA GX 120/160/200 REF. ORIG. 180.1025

COMPLETE SELF-AVOLVING + COUPLE ad. HONDA GX 160/200

COMPLETE SELF-AVOLVING ad. HONDA GCV135/160

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

DRY AIR FILTER ad. ENGINE HONDA GX 240 270

MARMIT ad. HONDA GX 120/160/200 REF. ORIG. 180.032

COMPLETE DRY AIR FILTER ad. HONDA GX 120/160/200 REF. ORIG. 30.244

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

PLASTIC TANK CAP ad. HONDA GX 35

PLASTIC TANK CAP ad. HONDA GXV 160

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

TANK WITH CAP ad. HONDA GX 160/200 REF. ORIG. 180.035

TANK WITH CAP ad. HONDA GX 240/270

ENGINE FLANGE ad. HONDA GX270

Ruggerini/ ACME

RD/ RF 80/ 81 - ACME ADN 37/43

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD/RF 80/81/90/91 REF. ORIG. 960.56 + 960.55

VALVE ad. RUGGERINI RF80/90/120/140/850/901/920 RD80/90/120/140/850/901/920

MARMIT ad. RUGGERINI RD/RF 80/81/90/120/901 MC 71 REF. ORIG. 526.42

PUNTERIE COVER + OIL CAP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME AND 37/43 REF. ORIG. 233.23

TRANSPARENT PREFILTER RING ad. RUGGERINI RD/RF 80/81 MC 71 EXTERNAL DIAMETER 114mm HEIGHT 53mm

TANK KIT COMPLETE WITH FILTER CAP WITH PIPES PLATE AND ACCESSORIES ad. RUGGERINI RF80/90/120/140

BUTTERFLY STRINGS TUBE ad. RUGGERINI RF80/90/120/140 LOMBARDINI

OIL COUPLE ad. RUGGERINI RF80/90/120/140

OIL COUP SEAL ad. RUGGERINI RF80/90/120/140

POWER TUBE ad. RUGGERINI RF80/90/120/140

TANK PUMP CONNECTION PIPE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF80/90

INJECTION PUMP CONNECTION HOSE ad. RUGGERINI RF80/90/120/140

CARTER ENGINE CLOSURE PLUG ad. LOMBARDINI RUGGERINI RF80/90/120/140

RPM REGULATOR LEVERS GROUP ad. RUGGERINI RF80/90/120/140

WHEEL SIDE BANK SUPPORT ad. RUGGERINI RF80/90/120/140

FLY SIDE CONVEYOR ad. RUGGERINI RF80/90

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

OIL PUMP ad. RUGGERINI RF 80/90/120/140 REF. ORIG. A2417.00A24R0170

OIL FILTER ad. RUGGERINI RD/RF 80/81/90/120/140/901

NAFTA FILTER WITH PLATE 4 HOLES ad. RUGGERINI RD80/81/901/920 REF. ORIG. 91A0120

PUMPER ad. RUGGERINI RD/RF 80/81 RD901/A RD850/900/920/950 RF120/130/140

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

NAFTA FILTER WITH SEAL ad. RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 175.32-21752050

FULL INJECTOR HOLDER ad. RUGGERINI RF80/90/120/140

POLVERIZER TYPE SHORT ad. RUGGERINI RF 80/81/90/91/120/140 REF. ORIG. 644.37

COMPLETE BILANCE GROUP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME ADN 37/43 REF. ORIG. 104.34 + 104.35

COMPEL ELECTRIC START KIT ad. RUGGERINI RD/RF 80/81/90/91/100/120/121 MC71

COMPLETE OIL OIL VENT PLUG ad. RUGGERINI RF80/90/120 ACME REF. ORIG. 00902R0240

EXHAUST GASKET ad. RUGGERINI RD/RF 80/81 RF90/120

PUMPER ad. RUGGERINI MC70 - 71 RF88 RF 148 ECHOR REF. ORIG. 660.20

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

BRONZE BIELLA HEAD ad. RUGGERINI RD/RF80 STD

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/120 STD

ORIGINAL RUGGERINI RF80 RF90 TANK

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

MOTOR SHAFT ad. RUGGERINI RD81 RF80/90 REF. ORIG. 291200A26R0680

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 80/81 DECENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+00A20R0770

TANK ad. RUGGERINI RF80 RF90

CAMMES SHAFT ad. RUGGERINI RF80/120 RD80/901

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

INJECTION TUBE ad. RUGGERINI RF80/90 RD80 MC71

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF80/90 RD80

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE GROUP ad. RUGGERINI RF80/90 RD80 MC71 ACME ADN37

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 80 CENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+2336

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

FULL PISTON ad. RUGGERINI RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

FULL PISTON ad. RUGGERINI RD 80/81 MC70/71 D=80.50mm ORIGIN REF. A2078.00A20R0780

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80mm ORIG. REF. A2077.00A20R0770

AIR FILTER WITH FULL OIL BATH HAT ad. RUGGERINI RD/RF 80/81

PUNTERIA COVER GASKET ad. RUGGERINI RF80/RF81 RD80/RD81 MC71/ACME ADN37

ASPIRATION VALVE ad. RUGGERINI RF80/RF81 COD. ORIG. 960R049

EXHAUST VALVE ad. RUGGERINI RF80/RF81 COD. ORIG. 960R050

RD/ RF 90/ 91/ 120/ 140

FILTRO NAFTA AD AVVITARE TIPO BASSO ad. RUGGERINI RD80/90/901/920 E VARI

MOTOR SHAFT ad. RUGGERINI RF140 REF. ORIG. 012.10

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RD80/81 RF80/81 MC70/71 ADN37 REF. ORIG. 2329.0023290000

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD/RF 80/81/90/91 REF. ORIG. 960.56 + 960.55

FULL PISTON ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=91mm ORIGINAL REF. A 2154

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/81/90/91/120/140 MC71 0.50

VALVE ad. RUGGERINI RF80/90/120/140/850/901/920 RD80/90/120/140/850/901/920

MARMIT ad. RUGGERINI RD/RF 80/81/90/120/901 MC 71 REF. ORIG. 526.42

PUNTERIE COVER + OIL CAP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME AND 37/43 REF. ORIG. 233.23

FULL PISTON ad. RUGGERINI RF140/148 DECENTRALIZED CHAMBER SECOND INCREMENT D=96

TANK KIT COMPLETE WITH FILTER CAP WITH PIPES PLATE AND ACCESSORIES ad. RUGGERINI RF80/90/120/140

BUTTERFLY STRINGS TUBE ad. RUGGERINI RF80/90/120/140 LOMBARDINI

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF140

OIL COUPLE ad. RUGGERINI RF80/90/120/140

OIL COUP SEAL ad. RUGGERINI RF80/90/120/140

POWER TUBE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF120/140

TANK PUMP CONNECTION PIPE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF80/90

INJECTION PUMP CONNECTION HOSE ad. RUGGERINI RF80/90/120/140

CARTER ENGINE CLOSURE PLUG ad. LOMBARDINI RUGGERINI RF80/90/120/140

RPM REGULATOR LEVERS GROUP ad. RUGGERINI RF80/90/120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF80/90

WHEEL SIDE BANK SUPPORT ad. RUGGERINI RF80/90/120/140

FULL PISTON ad. RUGGERINI RF 90/91 DECENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2154

FULL PISTON ad. RUGGERINI RD 220/901 CENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2408

FULL PISTON ad. RUGGERINI RF 120/RF121 D=90.50mm ORIGINAL REF. A 2405

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

BRONZE HEAD BRASS ad. RUGGERINI RF 120/130/140 0.25

BRASS BIELLA HEAD ad. RUGGERINI RF 120/130/140 STD

INJECTION PUMP ad. RUGGERINI RD180/200/208/210/210 REF. ORIG. 656.48

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

CYLINDER HEAD GASKET ad. RUGGERINI RF120 RD901

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

OIL PUMP ad. RUGGERINI RF 80/90/120/140 REF. ORIG. A2417.00A24R0170

SEGMENT SERIES ad. RUGGERINI RD 270/278/950/952 RF 140/148 STANDARD D=95mm REF ORIG. 8210.049-8210.067

POLVERIZER LONG TYPE ad. RUGGERINI RD 80/81/901/920/950 RD850/900/920 RD901/A REF. ORIG. 644.26

FULL INJECTOR HOLDER ad. RUGGERINI RF80/90/120/140

VOLTAGE SIDE CONVEYOR ad. RUGGERINI RF120 RF140

VALVE HEAD LIFT LEVER COMPLETE WITH GASKET ad. RUGGERINI RF80 RF90 RF120 RF140

HEAD LIFT LEVER COMPLETE WITH SPRING AND SCREWS ad. RUGGERINI RF120 RF140

POLVERIZER TYPE SHORT ad. RUGGERINI RF 80/81/90/91/120/140 REF. ORIG. 644.37

COMPLETE BILANCE GROUP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME ADN 37/43 REF. ORIG. 104.34 + 104.35

COMPLETE ELECTRIC START KIT ad. RUGGERINI RD/RF 130/140/148 RD85/850/901/901/2 MC71

COMPEL ELECTRIC START KIT ad. RUGGERINI RD/RF 80/81/90/91/100/120/121 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 100/120/121/130/140/148 RD85/850/901/901/2 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 80/81/90/91 MC71

COMPLETE OIL OIL VENT PLUG ad. RUGGERINI RF80/90/120 ACME REF. ORIG. 00902R0240

EXHAUST GASKET ad. RUGGERINI RD/RF 80/81 RF90/120

BRONZE BIELLA HEAD ad. RUGGERINI RD/RF80 STD

BRONZE BANK SIDE VOLTAGE DISTRIBUTION ad. RUGGERINI RD/RF 80/120 0.25

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/120 STD

AIR FILTER WITH OIL BATH TRANSPARENT ad. RUGGERINI RF 120/121/140 RD 901/920

ORIGINAL RUGGERINI RF80 RF90 TANK

FULL PISTON ad. RUGGERINI RF140-148 OFF-CENTER CHAMBER FIRST SURCHARGE D=95.50 REF.ORIG. A21R0080

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RF90/120/130/140 RD210

KIT VALVES + GUIDES INLET AND OUTLET ad. RUGGERINI RF90/120/130/140 RD210

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

STEEL CYLINDER ad. RUGGERINI RF80/81/88/90/91 RD 80/81 MC 70/71 REF. ORIG. 100.36-A2546

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=90mm ORIG. REF. 00203R071000A21R0530

MOTOR SHAFT ad. RUGGERINI TDRF120/140 REF. ORIG. 0021160000

TANK ad. RUGGERINI RF80 RF90

CAMMES SHAFT ad. RUGGERINI RF80/120 RD80/901

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF80/90 RD80 MC71

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF80/90 RD80

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. RUGGERINI RF120/140 RD901/920

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE GROUP ad. RUGGERINI RF80/90 RD80 MC71 ACME ADN37

SEGMENT SERIES ad. RUGGERINI RF120 RD90/901 D=90mm STD ORIGINAL REF. 2149

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 120/121 D=90mm ORIG. REF. 00203R0120+00A20R0990

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

FULL PISTON ad. RUGGERINI RF 120/RF121 D=91mm ORIGIN REF. A2101.00A21R0010

SMIRROR GASKET SERIES ad. RUGGERINI RF140/RF148

FILTRO NAFTA AD AVVITARE TIPO BASSO ad. RUGGERINI RD80/90/901/920 E VARI

VALVE ad. RUGGERINI RF80/90/120/140/850/901/920 RD80/90/120/140/850/901/920

MARMIT ad. RUGGERINI RD/RF 80/81/90/120/901 MC 71 REF. ORIG. 526.42

PUNTERIE COVER + OIL CAP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME AND 37/43 REF. ORIG. 233.23

STARTER MOTOR ad. ENGINE RUGGERINI RD210 211 RD218 270 278

FULL PISTON ad. RUGGERINI RD 220/901 CENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2408

INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD220/240/270/278 REF. ORIG. 0096R570

KIT CYLINDER + PISTON COMPLETE CENTRAL CHAMBERad. RUGGERINI RD 220/901 D=90mm ORIG. REF. 00203R0120 00A24R0070

INJECTION PUMP ad. RUGGERINI RD220 RD270 REF. ORIG. 656.19

INJECTION PUMP ad. RUGGERINI RD180/200/208/210/210 REF. ORIG. 656.48

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

CYLINDER HEAD GASKET ad. RUGGERINI RF120 RD901

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

SEGMENT SERIES ad. RUGGERINI RD 270/278/950/952 RF 140/148 STANDARD D=95mm REF ORIG. 8210.049-8210.067

NAFTA FILTER WITH PLATE 4 HOLES ad. RUGGERINI RD80/81/901/920 REF. ORIG. 91A0120

POLVERIZER LONG TYPE ad. RUGGERINI RD 80/81/901/920/950 RD850/900/920 RD901/A REF. ORIG. 644.26

COMPLETE ELECTRIC START KIT ad. RUGGERINI RD/RF 130/140/148 RD85/850/901/901/2 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 100/120/121/130/140/148 RD85/850/901/901/2 MC71

COMPLETE GASKET SERIES ad. RUGGERINI RD270/278 RD 952 SERIES

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 SECOND ADDITION D=96mm

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 FIRST ADDITION D=95.50mm

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

MOTOR SHAFT ad. RUGGERINI RD270/278 RIG. ORIG. 23910023910000

CAMMES SHAFT ad. RUGGERINI RF80/120 RD80/901

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF120/140 RD901

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. RUGGERINI RF120/140 RD901/920

SEGMENT SERIES ad. RUGGERINI RF120 RD90/901 D=90mm STD ORIGINAL REF. 2149

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 270/278/952 D=95mm ORIG. REF. 00203R0680+0024920000

ASPIRATION VALVE ad. RUGGERINI RD85/RD850/RD901 COD. ORIG. 960.015

FILTRO NAFTA AD AVVITARE TIPO BASSO ad. RUGGERINI RD80/90/901/920 E VARI

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

MOTOR SHAFT ad. RUGGERINI RF140 REF. ORIG. 012.10

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RD80/81 RF80/81 MC70/71 ADN37 REF. ORIG. 2329.0023290000

MOTOR SHAFT ad. RUGGERINI RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD/RF 80/81/90/91 REF. ORIG. 960.56 + 960.55

KIT CYLINDER + PISTON COMPLETE DECENTRAL CHAMBER ad. RUGGERINI RD210 D=90mm

FULL PISTON ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=91mm ORIGINAL REF. A 2154

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/81/90/91/120/140 MC71 0.50

DYNAMO ENGINE ad. LOMBARDINI RUGGERINI SERIES 6LD 3LD 4LD RD RF 80/90/120/140 8 TO 18 HP

STARTER MOTOR ad. RUGGERINI MD150

FILTER MASS FOR AIR FILTERS FBN LDA450/451/510 3LD450/451/510 RUGGERINI D=128X80

SEGMENT SERIES ad. RUGGERINI CRD100 D=100.50mm

FULL PISTON ad. ACME A220 D=72.50mm

MARMIT ad. ACME ALN

VALVE ad. RUGGERINI RF80/90/120/140/850/901/920 RD80/90/120/140/850/901/920

MARMIT ad. RUGGERINI RD/RF 80/81/90/120/901 MC 71 REF. ORIG. 526.42

FULL PISTON ad. ACME D=72mm

COMPLETE PISTON ad. RUGGERINI ACME ADN CENTRAL CHAMBER D=85.50mm

PUNTERIE COVER + OIL CAP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME AND 37/43 REF. ORIG. 233.23

MARMIT ad. ACME VT88 RUGGERINI

STARTER MOTOR ad. ENGINE RUGGERINI RD210 211 RD218 270 278

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER STD D=85mm

TRANSPARENT PREFILTER RING ad. RUGGERINI RD/RF 80/81 MC 71 EXTERNAL DIAMETER 114mm HEIGHT 53mm

COMPLETE GASKET SERIES ad. RUGGERINI RD901/2

FULL PISTON ad. RUGGERINI RD210 DECENTRAL CHAMBER D=90.50mm

FULL PISTON ad. RUGGERINI RF140/148 DECENTRALIZED CHAMBER SECOND INCREMENT D=96

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER SECOND MAJOR D=96mm

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER STD D=95mm

SEGMENT SERIES ad. RUGGERINI RD95 D=95mm STD

TANK KIT COMPLETE WITH FILTER CAP WITH PIPES PLATE AND ACCESSORIES ad. RUGGERINI RF80/90/120/140

BUTTERFLY STRINGS TUBE ad. RUGGERINI RF80/90/120/140 LOMBARDINI

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF140

OIL COUPLE ad. RUGGERINI RF80/90/120/140

OIL COUP SEAL ad. RUGGERINI RF80/90/120/140

POWER TUBE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF120/140

TANK PUMP CONNECTION PIPE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF80/90

INJECTION PUMP CONNECTION HOSE ad. RUGGERINI RF80/90/120/140

CARTER ENGINE CLOSURE PLUG ad. LOMBARDINI RUGGERINI RF80/90/120/140

RPM REGULATOR LEVERS GROUP ad. RUGGERINI RF80/90/120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF80/90

WHEEL SIDE BANK SUPPORT ad. RUGGERINI RF80/90/120/140

MARMIT ad. LOMBARDINI LA400/490 FRT RUGGERINI RD/RF 80/81/90/120/901

ORIGINAL RUGGERINI RF80 RF90 TANK CAP

FLY SIDE CONVEYOR ad. RUGGERINI RF80/90

COMPLETE GASKET SERIES ad. RUGGERINI RD220/901-2 REF. ORIG. A2319

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER D=85.50mm ORIGINAL REF. 2131

FULL PISTON ad. RUGGERINI RD 200/201/208 MD95/180 DECENTRAL CHAMBER D=85.50mm ORIGINAL REF. A 2147

FULL PISTON ad. RUGGERINI RF 90/91 DECENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2154

FULL PISTON ad. RUGGERINI RD 220/901 CENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2408

FULL PISTON ad. RUGGERINI RF 120/RF121 D=90.50mm ORIGINAL REF. A 2405

COMPLETE GASKET SERIES ad. RUGGERINI RD 210/211/218 REF. ORIG. A2093

INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD220/240/270/278 REF. ORIG. 0096R570

KIT CYLINDER + PISTON COMPLETE CENTRAL CHAMBERad. RUGGERINI RD 220/901 D=90mm ORIG. REF. 00203R0120 00A24R0070

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

BRONZE HEAD BRASS ad. RUGGERINI RF 120/130/140 0.25

BRASS BIELLA HEAD ad. RUGGERINI RF 120/130/140 STD

INJECTION PUMP ad. RUGGERINI RD220 RD270 REF. ORIG. 656.19

INJECTION PUMP ad. RUGGERINI RD180/200/208/210/210 REF. ORIG. 656.48

COUPLE WASHERS ad. RUGGERINI SERIES RD/RF 30x47x7 42x56x7 ORIGINAL REF. 2118.0021180000

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

CYLINDER HEAD GASKET ad. RUGGERINI RF120 RD901

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

OIL PUMP ad. RUGGERINI RF 80/90/120/140 REF. ORIG. A2417.00A24R0170

TANK CAP ad. ACME ALN 290/330 REF. ORIG. 898.111

SEGMENT SERIES ad. RUGGERINI RD 270/278/950/952 RF 140/148 STANDARD D=95mm REF ORIG. 8210.049-8210.067

TRANSPARENT AIR FILTER PREFILTER RING ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI RUGGERINI D=103x55mm

OIL FILTER ad. RUGGERINI RD/RF 80/81/90/120/140/901

NAFTA FILTER WITH PLATE 4 HOLES ad. RUGGERINI RD80/81/901/920 REF. ORIG. 91A0120

POLVERIZER LONG TYPE ad. RUGGERINI RD 80/81/901/920/950 RD850/900/920 RD901/A REF. ORIG. 644.26

PUMPER ad. RUGGERINI RD/RF 80/81 RD901/A RD850/900/920/950 RF120/130/140

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

NAFTA FILTER WITH SEAL ad. RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 175.32-21752050

TRANSPARENT PREFILTER RING ad. RUGGERINI D=129X59mm

FULL INJECTOR HOLDER ad. RUGGERINI RF80/90/120/140

VOLTAGE SIDE CONVEYOR ad. RUGGERINI RF120 RF140

VALVE HEAD LIFT LEVER COMPLETE WITH GASKET ad. RUGGERINI RF80 RF90 RF120 RF140

HEAD LIFT LEVER COMPLETE WITH SPRING AND SCREWS ad. RUGGERINI RF120 RF140

POLVERIZER TYPE SHORT ad. RUGGERINI RF 80/81/90/91/120/140 REF. ORIG. 644.37

COMPLETE BILANCE GROUP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME ADN 37/43 REF. ORIG. 104.34 + 104.35

COMPLETE ELECTRIC START KIT ad. RUGGERINI RD/RF 130/140/148 RD85/850/901/901/2 MC71

COMPEL ELECTRIC START KIT ad. RUGGERINI RD/RF 80/81/90/91/100/120/121 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 100/120/121/130/140/148 RD85/850/901/901/2 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 80/81/90/91 MC71

COMPLETE OIL OIL VENT PLUG ad. RUGGERINI RF80/90/120 ACME REF. ORIG. 00902R0240

EXHAUST GASKET ad. RUGGERINI RD/RF 80/81 RF90/120

PUMPER ad. RUGGERINI MC70 - 71 RF88 RF 148 ECHOR REF. ORIG. 660.20

ACME ADN PUMP 48 - 54 - 60W

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

COMPLETE GASKET SERIES ad. RUGGERINI RD270/278 RD 952 SERIES

BRONZE BIELLA HEAD ad. RUGGERINI RD/RF80 STD

BRONZE BANK SIDE VOLTAGE DISTRIBUTION ad. RUGGERINI RD/RF 80/120 0.25

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/120 STD

AIR FILTER WITH OIL BATH TRANSPARENT ad. RUGGERINI RF 120/121/140 RD 901/920

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 SECOND ADDITION D=96mm

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 FIRST ADDITION D=95.50mm

ORIGINAL RUGGERINI RF80 RF90 TANK

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER FIRST ADDITION D=95.5mm

FULL PISTON ad. RUGGERINI RF140-148 OFF-CENTER CHAMBER FIRST SURCHARGE D=95.50 REF.ORIG. A21R0080

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RF90/120/130/140 RD210

KIT VALVES + GUIDES INLET AND OUTLET ad. RUGGERINI RF90/120/130/140 RD210

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI CRD 100/951 RP 170/320 CENTRAL CHAMBER D=100mm ORIG. REF. 203.11

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

STEEL CYLINDER ad. RUGGERINI RF80/81/88/90/91 RD 80/81 MC 70/71 REF. ORIG. 100.36-A2546

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=90mm ORIG. REF. 00203R071000A21R0530

MOTOR SHAFT ad. RUGGERINI RD270/278 RIG. ORIG. 23910023910000

MOTOR SHAFT ad. RUGGERINI RD81 RF80/90 REF. ORIG. 291200A26R0680

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 80/81 DECENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+00A20R0770

MOTOR SHAFT ad. RUGGERINI TDRF120/140 REF. ORIG. 0021160000

TANK ad. RUGGERINI RF80 RF90

CAMMES SHAFT ad. RUGGERINI RF80/120 RD80/901

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF80/90 RD80 MC71

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF80/90 RD80

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. RUGGERINI RF120/140 RD901/920

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE GROUP ad. RUGGERINI RF80/90 RD80 MC71 ACME ADN37

SEGMENT SERIES ad. RUGGERINI RF120 RD90/901 D=90mm STD ORIGINAL REF. 2149

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 120/121 D=90mm ORIG. REF. 00203R0120+00A20R0990

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 80 CENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+2336

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 270/278/952 D=95mm ORIG. REF. 00203R0680+0024920000

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

FULL PISTON ad. RUGGERINI RF 120/RF121 D=91mm ORIGIN REF. A2101.00A21R0010

FULL PISTON ad. RUGGERINI RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

FULL PISTON ad. RUGGERINI RD 80/81 MC70/71 D=80.50mm ORIGIN REF. A2078.00A20R0780

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80mm ORIG. REF. A2077.00A20R0770

AIR FILTER WITH FULL OIL BATH HAT ad. RUGGERINI RD/RF 80/81

CYLINDER HEAD GASKET ad. RUGGERINI RD850

ASPIRATION VALVE ad. RUGGERINI RD85/RD850/RD901 COD. ORIG. 960.015

SMIRROR GASKET SERIES ad. RUGGERINI RF140/RF148

PUNTERIA COVER GASKET ad. RUGGERINI RF80/RF81 RD80/RD81 MC71/ACME ADN37

ASPIRATION VALVE ad. RUGGERINI RF80/RF81 COD. ORIG. 960R049

EXHAUST VALVE ad. RUGGERINI RF80/RF81 COD. ORIG. 960R050

ACME SEGMENT SERIES ADX 370 D=82mm

GASKET SEAL ad. RUGGERINI V.T. RD80 RD850 RD901

ACME NAFTA FILTER ad. RUGGERINI MC70/MC90 MD150 MICRO51 ADX300

COMPLETE INJECTION PUMP ad. RUGGERINI RD/RF 80/81/90/91 RD901-A/920 RF120/130/140 ACME ADN 37/43/54/60

STARTER CROWN ad. RUGGERINI RD/RF 130/140/148 RD85/901/901/2 MC71 Z=117 REF. ORIG. 25611-00256R0110

STARTER CROWN ad. RUGGERINI RD80/81/90/91/100/120/121/850 RF80/81/90/91/100/120/121 MC71 Z=109 REF. ORIG. 25608-00256R0080

LDA510/ 3LD510/ LDA450

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

STARTER MOTOR ad. 6LD325/360/400/435 LDA520/530 LDA450/451/510 3LD450/451/510 RD/RF 80/81/90/91/100/120/121/130/140/148 RD85/850/901/901/2 MC71 EXTRACEE TYPE GREAVES

EXTENSION FOR MARMIT TYPE LONG VERSION TRACTOR ad. LOMBARDINI LDA450/451/510 3LD450/451/510 LDA100/820/91/96/97 4LD640/705/820 9LD625/2 9LD626/2 SERIES 5LD

LEFT ROTATION OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

AC PUMP SUPPLY ad. LOMBARDINI LDA450/451/510 3LD450/451/510

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

FIXED ENGINE SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

KIT SUPPORT + OIL FILTER + PIN LOMBARDINI ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SELF-AVOLVING SPACER ad. LOMBARDINI LDA450/510 3LD510 15LD315

PISTON PIN FOR PISTON ad. LOMBARDINI LDA450/510 3LD510

POWER TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

Bearing BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510

FULL PISTON ad. LOMBARDINI LDA450 D=86mm

CONVEYORS + ELECTRIC START KIT COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

FULL PISTON ad. LOMBARDINI LDA450 D=85.50mm

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/LDA510 3LD510

2-GROUND PULLEY STARTER ad. LOMBARDINI LDA450/510 3LD510

FULL PISTON ad. LOMBARDINI LDA450 D=85mm ORIGINAL REF. 6501.045

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=85.50mm ORIGINAL REF. 6501.074.292

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 3LD510 D=85mm ROUND CYLINDER N.T. ORIG. REF. 2380.083.292

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=86mm

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

CURRENT REGULATOR 6LD360 LDA510 LDA100 EXTRA CEE TYPE GREAVES

STARTER CROWN LDA450/510 3LD510 D=299mm d=267mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.038.283

ALTERNATOR LDA450/510 4LD640 LDA100 EXTRA CEE TYPE GREAVES

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

TUBE FOR TANK ad. LOMBARDINI LDA450/510 3LD510

BRONZINE BIELLA HEAD ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

MOTOR SHAFT KEY ad. LOMBARDINI LDA450/510 3LD510

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

FILTERING MASS GASKET ad. LOMBARDINI LDA450/510 3LD510

OIL FILTER SUPPORT GASKET ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

REMOTE STOP CONTROL COVER ad. LOMBARDINI LDA 450/LDA 510 LDA 96/97 4LD640 LDA100 4LD705 4LD820

BRONZE SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA450/510 3LD510

CARTER ad. LOMBARDINI LDA 450/510

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 SECOND ADDITION D=86mm

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/451/510 3LD510 LDA80

FILTER MASS WITH EDGE ad. LOMBARDINI LDA450/510 3LD510 D=150mm H=87mm

STEEL CYLINDER ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

VALVE ad. LOMBARDINI LDA450/510 4LD640 4LD820 LDA96/97/100

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA450 D=85mm ORIG. REF. 2380.074.283

COPPER WASHER FOR PUMP TANK CONNECTION TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ACCELERATOR CONTROL KIT + DISTANCE STOP COVER ad. LOMBARDINI LDA450/510 3LD510

ADJUSTABLE MOTOR SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

PUNTERIA TUBE GUIDE ad. LOMBARDINI LDA450/510 3LD510

GEAR RPM REGULATOR ad. LOMBARDINI LDA450/510 3LD510

KIT ACCESSORIES BILANCE GROUP ad. LOMBARDINI LDA450/510 3L510

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4330.021.28

COMPLETE PRESSURE VALVE KIT ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE GUIDE KIT + EXHAUST VALVE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4845.154.285+4845.156.285

INLET VALVE + EXHAUST VALVE KIT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 9652.017.283+9685.027.283

INLET & EXHAUST VALVE KIT + VALVE GUIDE ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP MOUNTED TO. LOMBARDINI LDA450/510 3LD510

ENGINE CARTER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1511.089.283

OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6370.326.283

VOLTAGE SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2569.616.283

CONVEYOR KIT ad. LOMBARDINI LDA450/510 3LD510

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3855.097.283

BRACKET SUPPORT ENGINE PLATE ALLUMINIUM ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6371.097.283

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 5066.015.283

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2568

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA450/510 3LD510

FLYWHEEL + STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2816.038.283

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

ELECTRIC START KIT ad. LOMBARDINI LDA450/510 3LD510

BRONZE FOOT WHITE ad. LOMBARDINI LDA450/510 3LD510 0.50mm

BRONZE BELLOW FOOT ad. LOMBARDINI LDA450/510 3LD510 0.25mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1630.007.271

BRONZINE HEAD ad. LOMBARDINI LDA450/510 3LD510 0.50mm ORIGINAL REF. 1640.029.271

BRONZINE HEADS BIELLA ad. LOMBARDINI LDA450/510 3LD510 0.25mm ORIGINAL REF. 1640.028.271

BIELLA HEAD BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.50

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.25

BRONZE KIT CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 STD

STEEL BLADE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8576.097.270

WHEEL SIDE SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8676.098.292

TREE A CAMMES ad. LOMBARDINI LDA450/510 3LD510

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1050.360.292

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1051.013.292

PUNTERIE COVER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2125.193.283

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA450/510 3LD510

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 STD D=85mm ORIGINAL REF. 8210.055.283

FULL PISTON ad. LOMBARDINI LDA510 3LD510 STD D=85mm ORIGINAL REF. 6501.073.292

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 D=85.50mm ORIGINAL REF. 8210.056.283

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI LDA510 STD D=85mm QUADRATED CYLINDER V.T. ORIG. REF. 2380.074.283

KIT CYLINDER + COMPLETE PISTON + SERIES SPINDLE ad. LOMBARDINI 3LD510 STD D=85mm N.T. ROUND CYLINDER REF. ORIG. 2380.083.292

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARKET FOR ELECTRIC STARTING LONG NECK TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 5462.090

AIR FILTER TANK ad. LOMBARDINI LDA450/510 3LD510 D=155mm H=100mm

AIR FILTER SPONGE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 5496.110

AIR FILTER COVER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 2125.056.291

TRANSPARENT PREFILTER NEW TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 1301.069.291

TRANSPARENT PREFILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 1301.069.291

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.102.292

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI LDA450/510 3LD510 15LD315/350/500 REF. ORIG. 3700.3730

AIR FILTER WITH HAT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.372.292

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 40x60x10 RDX LDA450/510 3LD510 ORIGINAL REF. 1210.076.9

REAR DRIVE SIDE OIL SEAL + WHEEL ad. LOMBARDINI 30x47x7 RP 40x60x10 RDX LDA450/510 3LD510 ORIGIN REF. 1213.060.9 1210.076.9

PUNTERIA COVER GASKET ad. LOMBARDINI LDA450/510 3LD510

PUNTER HOSE ad. LOMBARDINI LDA450/LDA510 REF. ORIG. 9520.039.273

ASPIRATION GASKET ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4500.067.283

OIL COUP SEAL ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4600.090.283

OIL COUPLE ad. LOMBARDINI LDA450/510 3LD510

COMPLETE GASKET SERIES ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 8180.033.283

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 8180.033.283

FULL INJECTOR DOOR OLD TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 6531.265

FULL INJECTOR HOLDER ad. LOMBARDINI LDA450 3LD510 REF. ORIG. 6531.265

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA450/510 LDA96/97/100/ 4LD640/820 REF. ORIG. 6590.033

VALVE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

POLVERIZER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF ORIG. 6531.265.710

DISCHARGE VALVE GUIDE ad. LOMBARDINI LDA 450 LDA510

PUMPER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF. ORIG. 6578.013.283

NAFTA FILTER SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.009.273

NAFTA FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

NAFTA FILTER WITH SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

PIN FOR OIL FILTER SUPPORT LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

LOMBARDINI OIL FILTER SUPPORT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

OIL FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

NAFTA FILTER SUPPORT GASKET ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT + GASKET + ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 2605.033.273

NAFTA FILTER SUPPORT + TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2605.033.273

GAS TANK FIXING BOLT ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820

STARTER PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

PLASTIC OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9050.050

OLD TANK CAP TYPE ad. LOMBARDINI LDA450 LDA96/97 REF. ORIG. 9043.037.285

TANK CAP ad. LOMBARDINI 6LD360 LDA450/510 LDA96/97/100 4LD640 4LD820 7LD 8LD 9LD 11LD 12LD AND VARIOUS REF. ORIG. 9043.025

ALUMINIUM OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

NEW ALUMINIUM OIL VENT PLUG TYPE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9055.003

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA450/510 3LD510

PULEGE START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6961.029

UPPER PLATE POGGIA VALVE SPRING + VALVE SEEDS ad. LOMBARDINI LDA450/LDA510 REF. ORIG. 6410.017.271

TANK TUBE ad. LOMBARDINI LDA450/510 3LD510

BALANCE TUBE ad. LOMBARDINI LDA450/510 3LD510

PUMP CONNECTION TUBE WITH THREE EYELETS FOR TANK WITH SCREW ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

OIL EXHAUST COVER WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

TANK SPRING ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

OIL LEVEL RANGE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1400.364

TANK KIT + CAP + SUPPORT + NAFTA FILTER + GASKET + PIPES + ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

CYLINDER BASE GASKET ad. LOMBARDINI LDA450/LDA510

VALVE SPRING ad. LOMBARDINI LDA450/LDA510 LDW COD. ORIG. 5755.005.271

SMERIGLIO GASKET SERIES + RUBBER RUBBERS AND VALVES ad. LOMBARDINI LDA450/LDA510 3LD510

INLET VALVE GUIDE ad. LOMBARDINI LDA450 LDA510 REF. ORIG. 4845.134.285

PUNTERIA COVER GASKET ad. LOMBARDINI LDA450/LDA510

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA450/LDA510 3LD510 REF. ORIG. 6410.038.285

LDA100/ 4LD640/ 4LD705/ 4LD820/ LDA91/ LDA96/ LDA97/ LDA820

KIT BRONZINE TESTA BIELLA BANCO LATO VOLANO E DISTRIBUZIONE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 LDA670/2/3/4 STD

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

OIL COUPLE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 STD

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI 4LD820 LDA820

SMERIGLIO SERIES ad. LOMBARDINI 4LD640 LDA96/97

EXTENSION FOR MARMIT TYPE LONG VERSION TRACTOR ad. LOMBARDINI LDA450/451/510 3LD450/451/510 LDA100/820/91/96/97 4LD640/705/820 9LD625/2 9LD626/2 SERIES 5LD

INJECTION TUBE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR FILTER WITH INCLUDED PLATE HOOD ad. LOMBARDINI 4LD820 LDA820

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR INLET + EXHAUST VALVE KIT ad. ENGINE LOMBARDINI LDA100 820 91 96 97 4LD640 705 820

SEGMENT SERIES ad. LOMBARDINI LDA100 4LD705 2nd ADDITION D=101mm

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

FIXED ENGINE SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=103mm ORIGINAL REF. 6502.072.091

KIT SUPPORT + OIL FILTER + PIN LOMBARDINI ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

PISTON PIN FOR PISTON ad. LOMBARDINI 4LD820

SPINOTTO FOR PISTON ad. LOMBARDINI LDA100/96/97 4LD640

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD820 REF. ORIG. 8205.083

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

MOTOR SHAFT LONG TYPE ad. LOMBARDINI 4LD820 LDA820

STEEL CYLINDER ad. LOMBARDINI LDA96/97/100 4LD640/4LD820 REF. ORIG. 1526.002

INLET VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9652.019.291

EXHAUST VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9685.031.291

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

CURRENT REGULATOR 6LD360 LDA510 LDA100 EXTRA CEE TYPE GREAVES

BARE CYLINDER HEAD ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

COMPLETE TANK KIT WITH PLATE BANDS NAFTA FILTER SUPPORT TUBE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8103.040

SMIRROR GASKET SERIES ad. LOMBARDINI LDA100 4LD705

CYLINDER HEAD BRONZE ad. LOMBARDINI LDA100 4LD640/705 LDA90/96 LDA670/672/673/674 STD REF. ORIG. 1640.025.262

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4330.023.291

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA100 4LD640/705/820 REF. ORIG. 6410.037.96

CYLINDER BASE GASKET ad. LOMBARDINI 4LD640 LDA96/97

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD640 LDA96/97

BIELLA FOOT BRONZE ad. LOMBARDINI LDA820

AIR FILTER INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

CYLINDER BASE SEAL ad. LOMBARDINI 4LD640 THICKNESS 0.3mm

FILTERING MASS GASKET ad. LOMBARDINI LDA450/510 3LD510

OIL FILTER SUPPORT GASKET ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

REMOTE STOP CONTROL COVER ad. LOMBARDINI LDA 450/LDA 510 LDA 96/97 4LD640 LDA100 4LD705 4LD820

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA100 4LD640 LDA820

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 SECOND SURCHARGE 0.50

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 FIRST SURCHARGE 0.25

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25 REF. ORIG. 1610.025.272

OIL LEVEL RANGE FOR SEP ad. LOMBARDINI LDA100 4LD640/820

FULL PISTON ad. LOMBARDINI 4LD640 LDA96/97 CENTRAL CHAMBER SECOND MAJOR D=96mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 FIRST ADDITION D=102.50mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 SECOND ADDITION D=103mm

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.091.272

VALVE ad. LOMBARDINI LDA450/510 4LD640 4LD820 LDA96/97/100

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

COPPER WASHER FOR PUMP TANK CONNECTION TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI LDA100/820/640 30x50x10 RSX REF. ORIG. 1213.058.9

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT MOUNTED to. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

FULL FLYWHEEL SIDE DISTRIBUTION CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 2816.011.270

START MOTOR ad. LOMBARDINI BOSCH LDA100 4LD640 LDA820 REF. ORIG. 0.101.109.012-5840.143.272

START MOTOR ad. LOMBARDINI LDA830/832/833 BOSCH

ELECTRIC START KIT ad. LOMBARDINI LDA100 4LD640 LDA820

WHEEL SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8675.067.270

AGRICULTURAL VERSION MOTOR SHAFT SHAFT TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.005.270

PUNTERIE COVER ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.083.272

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.073.272

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 STD D=95 REF. ORIG. 8210.052.276

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIG. REF. 6502.070.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=102.50mm ORIGINAL REF. 6502.071.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIGINAL REF. 6502.070.291

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD820 LDA820 D=102mm ORIG. REF. 2380.172.530

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97 D=95.50mm ORIG. REF. 6500.071.272

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA 96/97 STD D=95mm ORIG. REF. 6500.070.272

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD640 LDA96/97 D=95mm ORIG. REF. 2380.4530.530

SEGMENT SERIES ad. LDA100 4LD705 D=100.50mm ORIGINAL REF. 8210.050.279

SEGMENT SERIES ad. LDA100 4LD705 STD D=100mm ORIGINAL REF. 8210.049.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 DECENTRAL CHAMBER FIRST MAJOR D=100.50mm ORIGINAL REF. 6501.022.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 STD D=100mm ORIGINAL REF. 6501.021.279

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA100 4LD705 D=100mm ORIG. REF. 2380.132.540

4-BAND SEGMENT SERIES ad. LOMBARDINI 4LD640/4LD96/4LD97 D=95.50mm ORIGINAL REF. 8210.053.276

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.009.270

QUADRED MARKET ad. LOMBARDINI RUGGERINI LDA450/510 3LD510 LDA100/820 4LD640/820 RUGGERINI RF120/140 REF. ORIG. 5460.432

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.025.272

CURVE FOR LONG-TYPE MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

EXTENSION FOR LONG TYPE MARMITAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

SILENCER MARKET LONG TYPE ad. ENGINE LOMBARDINI LDA450 LDA510 3LD510 LDA100 LDA820 4LD640 4LD820 9LD625 2 9LD626 2 SERIES 5LD REF. ORIG. 5461.047

LONG TYPE GASKET KIT + PROLONG + CURVE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD REF. ORIG. 5461.047

AIR FILTER TANK ad. LOMBARDINI LDA100/820 4LD640/820 D=155 H=122

AIR FILTER SPONGE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 5496.110

FILTER MASS WITH EDGE ad. LOMBARDINI LDA100/820 4LD640/820 D=150mm H=107mm

AIR FILTER COVER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 2125.056.291

TRANSPARENT PREFILTER NEW TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 1301.069.291

TRANSPARENT PREFILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 1301.069.291

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.140.272

AIR FILTER WITH HAT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.139.272

DISCHARGE VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

CANNOTTO RUBBER ad. ENGINE LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 4740.017

SEAL COVER PUNTERIA ad. LOMBARDINI LDA100 LDA820 4LD640/820

PUNTER HOSE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820 REF. ORIG. 9520.023.270

INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

OIL COUP SEAL ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4600.091.270

COMPLETE GASKET SERIES ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

COMPLETE GASKET SERIES ad. LOMBARDINI LDA100 4LD705 REF. ORIG. 8180.027.279

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA100 4LD705 REF. ORIG. 8180.027.279

FULL INJECTOR DOOR OLD TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 6531.265

FULL INJECTOR HOLDER ad. LOMBARDINI LDA450 3LD510 REF. ORIG. 6531.265

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA450/510 LDA96/97/100/ 4LD640/820 REF. ORIG. 6590.033

FRONT WHEEL SEAL SIDE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 45x62x10

POLVERIZER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF ORIG. 6531.265.710

PUMPER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF. ORIG. 6578.013.283

NAFTA FILTER SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.009.273

NAFTA FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

NAFTA FILTER WITH SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

PIN FOR OIL FILTER SUPPORT LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

LOMBARDINI OIL FILTER SUPPORT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

OIL FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SCREW FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

COUPLE FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT + GASKET + ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 2605.033.273

NAFTA FILTER SUPPORT + TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2605.033.273

NAFTA FILTER SUPPORT KIT + TUBE + NAFTA FILTER WITH GASKET AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2605.033.273

GAS TANK FIXING BOLT ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820

PULEGE START ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 6961.061.0395

PUMP CONNECTION TUBE WITH THREE EYELETS FOR TANK WITH SCREW ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

OIL LEVEL RANGE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 1400.362

V.T. TANK WITH CAP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8101.70.270

GAS TANK WITH CAP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8101.070

CYLINDER BASE SEAL ad. LOMBARDINI 4LD820

EXHAUST GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

INLET VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820 REF. ORIG. 4845.160.291

PLATE + SEMICONES ad. LOMBARDINI 4LD640 LDA96/97 4LD705 LDA100 4LD820 COD. ORIG. 6410.018.260

VALVE SPRING ad. LOMBARDINI 4LD705 LDA100 4LD640 LDA96/97 4LD820 LDA820 REF. ORIG. 5755.004.260

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD820

LDA520/ LDA530/ 6LD325/ 6LD360/ 6LD400/ 6LD435

TESTA CILINDRO COMPLETA DI VALVOLE PER PORTA INIETTORE GAMBO LARGO ad. LOMBARDINI 6LD360/400

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

2-EYE PUMP CONNECTION PIPE HOSE FOR TANK WITH PIPET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

STARTER MOTOR ad. 6LD325/360/400/435 LDA520/530 LDA450/451/510 3LD450/451/510 RD/RF 80/81/90/91/100/120/121/130/140/148 RD85/850/901/901/2 MC71 EXTRACEE TYPE GREAVES

SMERIGLIO SERIES ad. LOMBARDINI 6LD400/435

DYNAMO ENGINE ad. LOMBARDINI RUGGERINI SERIES 6LD 3LD 4LD RD RF 80/90/120/140 8 TO 18 HP

CONVEYOR KIT WITH ELECTRIC START COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

WHEEL LEVER ad. LOMBARDINI 6LD360/400/435

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

BARE CYLINDER HEAD WITH VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

COMPLETE PISTON ad. LOMBARDINI 6LD400 D=86.50mm ORIG. REF. 6500.731.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

PISTON PIN FOR PISTON ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SMERIGLIO SERIES ad. LOMBARDINI 6LD360

ALUMINIUM CYLINDER WASHER ad. LOMBARDINI ENGINE 6LD435 PIN DIAMETER 22mm

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

FULL INJECTOR HOLDER WIDE LEGS ad. LOMBARDINI 6LD360/400

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA520/530

ORIGINAL LOMBARDINI ALUMINIUM CYLINDER 6LD435 SPIN D=22mm

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

FULL PISTON ad. LOMBARDINI 6LD435 DECENTRAL CHAMBER D=86mm ORIGINAL REF. 6500 811

FULL PISTON ad. LOMBARDINI 6LD435 D=86.50mm ORIGINAL REF. 6501.403

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD400/435

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

SELF-WINDING PLATE 6LD360/400/435 15LD315

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 6500.734.530

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN 6LD325/360/400/435 LDA520/530 D=257mm d=227mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.036.530

BARE CYLINDER HEAD ad. LOMBARDINI LDA520/530

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 DECENTRAL CHAMBER SECOND MAJOR D=83mm ORIGINAL REF. 6500.734.530

SPRING FOR DISTANCE STOP CONTROL REGULATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

BIELLA FOOT BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

MOTOR SHAFT CAPS ad. 6LD325/360/400 LDA520/530

RUBBER VALVE ad. LOMBARDINI 6LD360/400/435

REMOTE STOP CONTROL COVER MOTOP PUMP VERSION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD325 LDA520

EXHAUST VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9685.039.520

INLET VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9652.025.520

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD360

MOTOR SHAFT KEY ad. LOMBARDINI 6LD 325/360/400/435

INLET VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.166.500

EXHAUST VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.168.500

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

OIL DISCHARGE PLUG ad. LOMBARDINI 6LD360/400/435 3LD510

CAMMES SHAFT ad. LOMBARDINI 6LD325/360/400/435

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 SECOND MAJOR D=79mm

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 SECOND ADDITION D=83mm

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=87mm

EXHAUST VALVE ad. LOMBARDINI 6LD360/400/435

ASPIRATION VALVE ad. LOMBARDINI 6LD360/400/435

GEAR RPM REGULATOR ad. LOMBARDINI 6LD360/400/435

VALVE ad. LOMBARDINI 6LD325/360/400/435 LDA530

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

COPPER WASHER FOR PUMP TANK CONNECTION TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTANCE STOP CONTROL SPRING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP CONTROL LEVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

REMOTE STOP CONTROL COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP COMMAND KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

COMPLETE BILANCER GROUP ad. LOMBARDINI 6LD325/360/400/435 REF. ORIG. 4330.039.540

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA520/530 REF. ORIG. 4330.003.502

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI 6LD435

CYLINDER HEAD COMPLETE WITH VALVES FOR STRAIGHT GAMBO INJECTOR PORT ad. LOMBARDINI 6LD360/400

CARTER ad. LOMBARDINI 6LD360/400 REF. ORIG. 1519.216.520

OIL PUMP ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6605.045

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6372.075.530

FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.096.530

CONVEYOR KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3790.040.530

ALUMINIUM ENGINE SUPPORT BRACKET ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6360.073.540

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6370.420.540

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.078.530

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2816.036.530

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

ELECTRIC START KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

BRONZE KIT CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm ORIGINAL REF. 1640.084.435

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm ORIGINAL REF. 1640.083.435

BRONZINE BIELLA HEAD ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1640.082.435

STEEL BLADE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1050.115.500

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

FLYWheel SIDE SUPPORT WITH BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 8675.135.500

MOTOPOMPA VERSION MOTOR SHAFT ad. LOMBARDINI LDA530 6LD360/400

MOTOR SHAFT ad. LOMBARDINI TILLER VERSION 6LD325/360/400 LDA520/530 REF. ORIG. 1050.115.500

PUNTERIE COVER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 2125.103.540

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 8210.081.520

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 8210.080.520

FULL PISTON ad. LOMBARDINI LDA 520 6LD325 D=79mm

FULL PISTON ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 6502.029.520

FULL PISTON ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 6502.028.520

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD435 D=86mm PIN=22mm ORIGINAL REF. 2380.172.530

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=86.50mm ORIGINAL REF. 8211.017.540

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 STD D=86mm ORIGINAL REF. 8211.056.540

FULL PISTON ad. LOMBARDINI 6LD400 D=86mm STD DECENTRAL CHAMBER

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 8211.046.530

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIG. REF. 8211.045.530

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIGINAL REF. 6500.733.530

FLYWHEEL + STARTING CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD360 D=82mm REF. ORIG. 2380.453.530

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI 6LD360 STD D=82mm ORIG. REF. 2380.453.530

ROPE + IMPUGNATION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5462.089.500

AIR FILTER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=127mm H=123mm

AIR FILTER SPONGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5496.113

FILTER MASS WITH SMALL EDGE TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=101mm H=63mm

FILTER MASS WITH EDGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5496.057 D=131mm H=95mm

AIR FILTER COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 2125.055.500

TRANSPARENT PREFILTER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1301.053.500

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

AIR FILTER WITH HAT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.111.540

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIG. REF. 1210.092.9

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28x38x7 RSX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9

REAR DRIVE SIDE OIL SEAL + FLYWHEEL ad. LOMBARDINI 28x38x7 RSX 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9 1210.092.9

RUBBER CANNOTTO ad. LOMBARDINI 6LD325 LDA520/530 REF. ORIG. 4740.018

RUBBER CANNOTTO ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 4740.025

CANNOTTO RUBBER ad. ENGINE LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 4740.017

SEAL COVER PUNTERS ad. LOMBARDINI 6LD325/360/400/435

EXHAUST GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 4500.091

ASPIRATION GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4500.092.520

OIL COUP SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4601.003.520

OIL COUPLE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD400/435 REF. ORIG. 8180.063.540

COMPLETE GASKET SERIES ad. LOMBARDINI 6LD360 REF. ORIG. 8180.082.530

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD360 REF. ORIG. 8180.082.530

COMPLETE INJECTION PUMP ad. LOMBARDINI 6LD360 6LD400 6LD435 REF. ORIG. 6590.073

POLVERIZER ad. LOMBARDINI LDA520/530 REF. ORIG. 6531.095.520

POLVERIZER TYPE SHORT ad. LOMBARDINI 6LD360/400 L=4cm ORIGINAL REF. 631.104.395

VALVE SPRING ad. LOMBARDINI 6LD360/6LD400/6LD435 LDA520/LDA530 COD. ORIG. 5755.045.500

PUMPER ad. LOMBARDINI LEFT PROPELLER LDA520 LDA530 REF. ORIG. 6578.038.530

PUMPING ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 6578.133.540

OIL FILTER LONG TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OIL FILTER TYPE SHORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

NAFTA FILTER SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2175.032.500

NAFTA FILTER WITH SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2175.032.500

SCREW FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT GASKET ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

COUPLE FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT + GASKET + ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2605.028.500

NAFTA FILTER SUPPORT KIT + TUBE + NAFTA FILTER WITH GASKET AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2605.028 + 2175.032

STARTER PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

PLASTIC OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9050.050

OLD TANK CAP TYPE ad. LOMBARDINI LDA450 LDA96/97 REF. ORIG. 9043.037.285

TANK CAP ad. LOMBARDINI 6LD360 LDA450/510 LDA96/97/100 4LD640 4LD820 7LD 8LD 9LD 11LD 12LD AND VARIOUS REF. ORIG. 9043.025

ALUMINIUM OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

NEW ALUMINIUM OIL VENT PLUG TYPE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9055.003

FLYWheel PROTECTION NETS ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

PULEGE START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6960.069

PUNTERIA ASTA ad. LOMBARDINI LDA530/LDA520

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD400 D=86mm REF. ORIG. 2380.132.540

INJECTION TUBE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 9372.090.500

POWER TUBE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 9375.204.500

PUMP CONNECTION TUBE WITH THREE EYELETS FOR TANK WITH SCREW ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

OIL EXHAUST COVER WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

TANK PLATE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8866.053.500

TANK SPRING ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

RUBBER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4701.010.500

TANK BAND ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3617.010.500

OIL LEVEL RANGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1400.386

ELASTIC PLUG FOR TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

NOTCH FOR TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SCREWS FOR TANK ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

N.T. EXHAUST VALVES ad. LOMBARDINI 6LD360

AIR INLET VALVE SEAT ad. LOMBARDINI 6LD360/6LD400/6LD435 LDA450/LDA510 COD. ORIG. 8000.036.283

EXHAUST VALVE SEAT ad. LOMBARDINI 6LD360/6LD400/6LD435 COD. ORIG. 8000.037.283

PLATE SPRING PLATE ad. LOMBARDINI LDA520 6LD325 LDA530 6LD360/6LD400/6LD435 REF. ORIG. 3430.070.500

CYLINDER BASE GASKET ad. LOMBARDINI LDA520 6LD325

UPPER PLATE ad. LOMBARDINI LDA520 LDA 530 6LD325 6LD360/400/435 REF. ORIG. 6410.035.500

N.T. EXHAUST VALVE ad. LOMBARDINI 6LD435

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD325 LDA520

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD400/435

N.T. INLET VALVE ad. LOMBARDINI 6LD435

LDA672/ LDA914 - 8LD665/2 - 9LD625/2

NAFTA FILTER WITH SEALS ad. LOMBARDINI LDA670/672/673 LDA830/832/833/834

POLVERIZER ad. LOMBARDINI LDA672/673/674/834 5LD672/2/3 5LD824/2 825/3 930/4 8LD600/2

FULL PISTON ad. LOMBARDINI LDA914 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6502.067

START ENGINE ad. LOMBARDINI 9LD561/2

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER SECOND MAJOR D=96mm ORIGINAL REF. 6500.157

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6500.156

ALTERNATOR ad. LOMBARDINI LDA904/914 8LD665/2 REF. ORIG. 11571580

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 FIRST ADDITION 0.25mm ORIGINAL REF. 1610.087.276

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1610.087.276

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

AC PUMP SUPPLY ad. LOMBARDINI 8LD665 LDA914

AC PUMP SUPPLY ad. LOMBARDINI LDA670/672/673/674

CENTRAL BANK BRONZE ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1640.046

BRONZE BANK CENTRAL ad. LOMBARDINI LDA670/672/673/674 FIRST SURCHARGE 0.25 REF. ORIG. 1640.047

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 D=95mm ORIG. REF. 4898.007

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA 670/672/673

AIR INLET AND EXHAUST VALVE KIT ad. LOMBARDINI LDA 670/672/673

FULL PISTON ad. LOMBARDINI 9LD625/2 11LD625/2/3 DECENTRAL CHAMBER STD D=95mm

COMPLETE CYLINDER + PISTON KIT ad. LOMBARDINI LDA914 7LD865 8LD665 D=95mm

OIL PUMP ad. LOMBARDINI 9LD560/2 9LD625/2 10LD360/2 10LD400/2 12LD 435/2 12LD475/2

BIELLA ad. LOMBARDINI 9LD625/2

MOTOR SHAFT ad. LOMBARDINI 9LD625/2

MOTOR SHAFT ad. LOMBARDINI 8LD665/2 LDA914

MOTOR SHAFT ad. LOMBARDINI LDA672

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 STD D=95 REF. ORIG. 8210.052.276

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 9LD625/2

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA914 8LD665/2

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA672 REF. ORIG. 8180.028.276

COMPLETE INJECTION PUMP ad. LOMBARDINI LDA672/832 5LD675/825/2 8LD600/665/740-2/904/914 9LD560-2/625-2 REF. ORIG. 6590.034

FULL INJECTOR HOLDER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 5010.040.196

POLVERIZZATORE TYPE LONG ad. LOMBARDINI 6LD360/400 L=53mm ORIG. REF. 631.104.395

15LD225/ 15LD315/ 15LD350/ 15LD400/ 15LD440

INLET VALVE GUIDE ad. LOMBARDINI 15LD315/350 REF. ORIG. 4845.218.196

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER STD D=82mm ORIGINAL REF. 6501.487.197

POLVERIZER ad. LOMBARDINI 15LD315

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER SECOND MAJOR D=83mm

SMERIGLIO SERIES ad. LOMBARDINI 15LD400

CYLINDER HEAD SEAL SECOND TAC ad. LOMBARDINI 15LD440

CYLINDER HEAD GASKET FIRST TAC ad. LOMBARDINI 15LD440

FULL INJECTOR HOLDER ad. LOMBARDINI 15LD440

FULL INJECTION PUMP ad. LOMBARDINI 15LD400/440

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI 15LD440 STD

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI 15LD440 STD

BIELLA HEAD BRONZE ad. LOMBARDINI 15LD400/440 STD

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD440

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 15LD315/350

ELECTRIC START KIT ad. LOMBARDINI 15LD315/350

REAR DRIVE SIDE OIL SEAL + FRONT VOLLEY ad. LOMBARDINI 30x50x7 RSX 40x55x7 RDX 15LD400/440 ORIGIN REF. 1213.390.205 1213.396.205

SEGMENT SERIES ad. LOMBARDINI 15LD440 STD D=86mm

AIR FILTER CARTRIDGE ad. LOMBARDINI 154LD440

FULL PISTON ad. LOMBARDINI 15LD440 STD D=86mm

OIL FILTER WITH CARTRIDGE ad. LOMBARDINI 15LD400/440

STEEL CYLINDER ad. LOMBARDINI 15LD400/440 STD REF. ORIG. 1526.264

RUBBER VALVE ad.LOMBARDINI 15LD440

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

ORIGINAL LOMARDINI AIR FILTER SPONGE 15LD225

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

ORIGINAL ALUMINIUM WHITCH ad. LOMBARDINI 15LD225 STD REF. ORIG. 15261960

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD400

GAS TANK BOLT ad. LOMBARDINI 15LD225/315/350

OIL PRESSURE STOP VALVE ad. LOMBARDINI 15LD315

EXHAUST VALVE GUIDE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 4845.219.196

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

EXHAUST VALVE ad. LOMBARDINI 15LD315 15LD350

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD400

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=79mm

SEMICARTER ad. LOMBARDINI 15LD400 REF. ORIG. 6645.712

MOTOR SHAFT BEARING ad. LOMBARDINI 15LD315

ALUMINIUM BLADE ad. LOMBARDINI 15LD350 0.25

ALUMINIUM WHITCH ad. LOMBARDINI 15LD350 STD

ORIGINAL LOMBARDINI 15LD225 TANK

PLASTIC OIL VENT PLUG ad. LOMBARDINI 15LD225/315/350

FULL PISTON ad. LOMBARDINI 15LD315 D=79mm ORIGINAL REF. 6501.252.196

ALUMINIUM BLADDER ad. LOMBARDINI 15LD350 0.50

CARTRIDGE DRAIN ad. LOMBARDINI 15LD225/315/350 REF. ORIG. 210.58.194

ELECTRIC STARTER FLYWHEEL SIDE GASKET ad. LOMBARDINI 15LD315/350

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 15LD315

ELECTRIC START AIR FILTER COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

MARKET + EXHAUST COLLECTOR ad. LOMBARDINI 15LD315/350

EXHAUST HOSE COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

INJECTION TUBE ad. LOMBARDINI 15LD315/350

AIR FILTER CURVE ad. LOMBARDINI 15LD315/350

PUNTERIE COVER ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 2125.269

SEAL COVER PUNTERIE ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 4400.097

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 STD REF. ORIG. 1611.185.196

GEAR RPM REGULATOR ad. LOMBARDINI 15LD315/350/225

CYLINDER HEAD ad. LOMBARDINI 15LD315 REF. ORIG. 9200.487

CARTER ad. LOMBARDINI 15LD400

ELECTRIC START ROTOR MAGNET ad. LOMBARDINI 15LD315/350/400/440 REF. ORIG. LOMBARDINI 2002.019

STARTER CROWN ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/75 Z=94 REF. ORIG. 2816.1020

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 FIRST MINORITY 0.25mm ORIG. REF. 1611.185.196

ALUMINIUM BLADE ad. LOMBARDINI 15LD315 0.25

ALUMINIUM CYLINDER ad. LOMBARDINI 15LD315 STD

MOTOR SHAFT ad. LOMBARDINI 15LD315/350 REF. ORIG. 1050.8560

SEGMENT SERIES ad. LOMBARDINI 15LD350 D= 82.50mm ORIGINAL REF. 8211.240.197

FULL PISTON ad. LOMBARDINI 15LD350 STD D=82mm ORIGINAL REF. 6501.487.197

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=78.50mm ORIG. REF. 8211.228.196

SEGMENT SERIES ad. LOMBARDINI 15LD315 STD D=78mm ORIG. REF. 8211.227.196

FULL PISTON ad. LOMBARDINI 15LD315 D=78.50mm ORIGINAL REF. 6501.251.196

FULL PISTON ad. LOMBARDINI 15LD315 STD D=78mm ORIGINAL REF. 6501.250.196

ENGINE CARTER ad. LOMBARDINI 15LD315

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

PANEL FILTER ELEMENT ad. LOMBARDINI 15LD225 RUGGERINI RY REF. ORIG. 2175180

DRY AIR FILTER ELEMENT ad. LOMBARDINI 15LD315/350

AIR FILTER TANK ad. LOMBARDINI LDA450/510 3LD510 D=155mm H=100mm

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28X40X7 RSX 15LD225/15LD315/15LD350 REF. ORIG. 1213.345.196

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.102.292

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD225 REF. ORIG. 8180.201.194

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD315 REF. ORIG. 8180.179.196

INJECTOR HOLDER COMPLETE ad. LOMBARDINI 15LD315/350 REF. ORIG. 5010.040.196

COMPLETE INJECTION PUMP ad. LOMBARDINI 15LD315/350 REF. ORIG. 6590.259.196

OIL FILTER ad. LOMBARDINI 15LD315/225/350/400/440 REF. ORIG. 2175.155.196

NAFTA FILTER ad. LOMBARDINI 15LD225 REF. ORIG. 2175.182

TUBE CONNECTION TANK RECOVERY 3-WAY ad. LOMBARDINI 15LD315/350 RUGGERINI RY 50/70/75/103/110 REF. ORIG. 9375.983

3-WAY NAFTA FILTER ad. LOMBARDINI 15LD315 RUGGERINI RY 50/70/75/103/110 REF. ORIG. 3730.096

GAS TANK CAP ad. LOMBARDINI 15LD315/350 REF. ORIG. 9043.079.183

ORIGINAL GAS TANK CAP ad. LOMBARDINI 15LD315/350 REF. ORIG. 9043.079.183

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

ORIGINAL TANK ad. LOMBARDINI 15LD315/350 REF. ORIG. 8103.269.196

PLASTIC TANK ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/85 REF. ORIG. 8103.269.196

THREE-WAY TUBE CONNECTION FITTING FITTINGS for ad. LOMBARDINI 15LD315 RUGGERINI RY 50/70/75/103/110

EXHAUST VALVE ad. LOMBARDINI 15LD225 COD. ORIG. 9652.149.194

OIL LEVEL ROD ad. LOMBARDINI 15LD315/350 REF. ORIG. 1400.233

FLYWHEEL ROTOR ad. LOMBARDINI 15LD315/350 REF. ORIG.8565.078

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD315

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD400/440 REF. ORIG. 1051.229

VOLLEY SIDE OIL SEAL ad. LOMBARDINI 15LD 225/315/350 (35X52X6) REF. ORIG. 1213.361

KIT BRONZINE TESTA BIELLA BANCO LATO VOLANO E DISTRIBUZIONE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 LDA670/2/3/4 STD

TESTA CILINDRO COMPLETA DI VALVOLE PER PORTA INIETTORE GAMBO LARGO ad. LOMBARDINI 6LD360/400

GOMMA GUARNIZIONE CONVOGLIATORE ad. LOMBARDINI LDA450/510

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

CORONA AVVIAMENTO ORIGINALE LOMBARDINI 15LD400

VOLANO ad. LOMBARDINI 15LD315

2-EYE PUMP CONNECTION PIPE HOSE FOR TANK WITH PIPET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

OIL COUPLE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

INLET VALVE GUIDE ad. LOMBARDINI 15LD315/350 REF. ORIG. 4845.218.196

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 STD

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI 4LD820 LDA820

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER STD D=82mm ORIGINAL REF. 6501.487.197

STARTER MOTOR ad. 6LD325/360/400/435 LDA520/530 LDA450/451/510 3LD450/451/510 RD/RF 80/81/90/91/100/120/121/130/140/148 RD85/850/901/901/2 MC71 EXTRACEE TYPE GREAVES

SMERIGLIO SERIES ad. LOMBARDINI 4LD640 LDA96/97

SMERIGLIO SERIES ad. LOMBARDINI 6LD400/435

EXTENSION FOR MARMIT TYPE LONG VERSION TRACTOR ad. LOMBARDINI LDA450/451/510 3LD450/451/510 LDA100/820/91/96/97 4LD640/705/820 9LD625/2 9LD626/2 SERIES 5LD

INJECTION TUBE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR FILTER WITH INCLUDED PLATE HOOD ad. LOMBARDINI 4LD820 LDA820

MOTOR SHAFT ad. LOMBARDINI 11LD25/3

MOTOR SHAFT ad. LOMBARDINI 5LD825/2 5LD832 REF. ORIG. 1050 .190

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR INLET + EXHAUST VALVE KIT ad. ENGINE LOMBARDINI LDA100 820 91 96 97 4LD640 705 820

SEGMENT SERIES ad. LOMBARDINI LDA100 4LD705 2nd ADDITION D=101mm

COMPLETE PISTON CYLINDER KIT ad. LOMBARDINI 9LD625/6-2-3 11LD625/6-2-3 DECENTRAL CHAMBER D=95mm

LEFT ROTATION OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

AC PUMP SUPPLY ad. LOMBARDINI LDA450/451/510 3LD450/451/510

POLVERIZER ad. LOMBARDINI 15LD315

CARBURATOR ad. LOMBARDINI LA400/490

DYNAMO ENGINE ad. LOMBARDINI RUGGERINI SERIES 6LD 3LD 4LD RD RF 80/90/120/140 8 TO 18 HP

CONVEYOR KIT WITH ELECTRIC START COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

WHEEL LEVER ad. LOMBARDINI 6LD360/400/435

ENGINE CARTER ad. LOMBARDINI 15LD350

FULL PISTON ad. LOMBARDINI 15LD400 STD D=82mm

ORIGINAL LOMBARDINI LDA510 ENGINE MOUNT

LOMBARDINI 15LD400/440 TAPPET SCREW

CONVEYOR GASKET ad. LOMBARDINI MOTOR L=315mm D=5mm

POWER TUBE ad. LOMBARDINI AND VARIOUS ENGINES 14mm DIAMETER LENGTH 45.57cm

HOOKS FOR AIR FILTERS ad. LOMBARDINI SERIES 6LD 3LD 4LD AND VARIOUS

BARE CYLINDER HEAD WITH VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

MASSEY FERGUSSON LANDINI PERKINS 2873K405 STARTING ENGINE Z=10 SPROCKET D=39mm HOLE INTERAXIS=88mm

OIL FILTER ad. LOMBARDINI LDA914 OLD600/2 8LD665/2 8LD740/2

OIL FILTER ad. LOMBARDINI 7LD600/665/740 9LD561/2 9LD625 9LD626/3 11LD625 12LD435/2/2B1 12LD475/2 FOCS LDW 502/903

NAFTA FILTER ad. LOMBARDINI LDA670/2/3/4 LDA830/2/3/4 5LD675/2/3/4 5LD825/2/3/4 11LD625

NAFTA FILTER ad. LOMBARDINI 9LD560/2 10LD560/2

NAFTA FILTER WITH SEALS ad. LOMBARDINI LDA670/672/673 LDA830/832/833/834

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. PASCHAL LOMBARDINI

FIXED ENGINE SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

POLVERIZER ad. LOMBARDINI LDA672/673/674/834 5LD672/2/3 5LD824/2 825/3 930/4 8LD600/2

ORIGINAL LOMBARDINI LA400/490 ELECTRONIC CONTROL UNIT COIL

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=103mm ORIGINAL REF. 6502.072.091

COMPLETE PISTON ad. LOMBARDINI 6LD400 D=86.50mm ORIG. REF. 6500.731.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

KIT SUPPORT + OIL FILTER + PIN LOMBARDINI ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SELF-AVOLVING SPACER ad. LOMBARDINI LDA450/510 3LD510 15LD315

PISTON PIN FOR PISTON ad. LOMBARDINI 4LD820

SPINOTTO FOR PISTON ad. LOMBARDINI LDA100/96/97 4LD640

PISTON PIN FOR PISTON ad. LOMBARDINI LDA450/510 3LD510

POWER TUBE ad. LOMBARDINI AND VARIOUS MOTORS DIAMETER 13.7mm LENGTH 48cm

FULL PISTON ad. LOMBARDINI LDA78 SECOND MAJOR D=79mm

POWER TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

COMPLETE GASKET SERIES ad. LOMBARDINI 5LD930/3

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD820 REF. ORIG. 8205.083

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER SECOND MAJOR D=83mm

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 5LD930/2/3 DECENTRAL CHAMBER STD D=106mm

SMERIGLIO SERIES ad. LOMBARDINI 15LD400

CYLINDER HEAD SEAL SECOND TAC ad. LOMBARDINI 15LD440

CYLINDER HEAD GASKET FIRST TAC ad. LOMBARDINI 15LD440

Bearing BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510

FULL INJECTOR HOLDER ad. LOMBARDINI 15LD440

FULL INJECTION PUMP ad. LOMBARDINI 15LD400/440

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI 15LD440 STD

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI 15LD440 STD

BIELLA HEAD BRONZE ad. LOMBARDINI 15LD400/440 STD

FULL PISTON ad. LOMBARDINI LDA450 D=86mm

SMERIGLIO SERIES ad. LOMBARDINI 6LD360

FULL PISTON ad. LOMBARDINI LDA914 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6502.067

START ENGINE ad. LOMBARDINI 9LD561/2

CONVEYORS + ELECTRIC START KIT COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

CARTER ENGINE CLOSURE PLUG ad. LOMBARDINI RUGGERINI RF80/90/120/140

FULL PISTON ad. LOMBARDINI LDA450 D=85.50mm

ALUMINIUM CYLINDER WASHER ad. LOMBARDINI ENGINE 6LD435 PIN DIAMETER 22mm

MARMIT ad. LOMBARDINI LA400/490 FRT RUGGERINI RD/RF 80/81/90/120/901

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

FULL INJECTOR HOLDER WIDE LEGS ad. LOMBARDINI 6LD360/400

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA520/530

MOTOR SHAFT LONG TYPE ad. LOMBARDINI 4LD820 LDA820

ORIGINAL LOMBARDINI ALUMINIUM CYLINDER 6LD435 SPIN D=22mm

ORIGINAL LOMBARDINI LGA225/226/340 ELECTRONIC COIL

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/LDA510 3LD510

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD440

FULL PISTON ad. LOMBARDINI 6LD435 DECENTRAL CHAMBER D=86mm ORIGINAL REF. 6500 811

FULL PISTON ad. LOMBARDINI 6LD435 D=86.50mm ORIGINAL REF. 6501.403

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER SECOND MAJOR D=96mm ORIGINAL REF. 6500.157

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6500.156

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD400/435

STEEL CYLINDER ad. LOMBARDINI LDA96/97/100 4LD640/4LD820 REF. ORIG. 1526.002

2-GROUND PULLEY STARTER ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9652.019.291

EXHAUST VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9685.031.291

FULL PISTON ad. LOMBARDINI LDA450 D=85mm ORIGINAL REF. 6501.045

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=85.50mm ORIGINAL REF. 6501.074.292

ALTERNATOR ad. LOMBARDINI LDA904/914 8LD665/2 REF. ORIG. 11571580

LOMBARDINI LGA226 LKA226 CAP REF. ORIG. 2942181

SELF-WINDING PLATE 6LD360/400/435 15LD315

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 6500.734.530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 3LD510 D=85mm ROUND CYLINDER N.T. ORIG. REF. 2380.083.292

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=86mm

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

CURRENT REGULATOR 6LD360 LDA510 LDA100 EXTRA CEE TYPE GREAVES

STARTER CROWN 6LD325/360/400/435 LDA520/530 D=257mm d=227mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.036.530

STARTER CROWN LDA450/510 3LD510 D=299mm d=267mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.038.283

BARE CYLINDER HEAD ad. LOMBARDINI LDA520/530

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 15LD315/350

ELECTRIC START KIT ad. LOMBARDINI 15LD315/350

REAR DRIVE SIDE OIL SEAL + FRONT VOLLEY ad. LOMBARDINI 30x50x7 RSX 40x55x7 RDX 15LD400/440 ORIGIN REF. 1213.390.205 1213.396.205

SEGMENT SERIES ad. LOMBARDINI 15LD440 STD D=86mm

BARE CYLINDER HEAD ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR FILTER CARTRIDGE ad. LOMBARDINI 154LD440

FULL PISTON ad. LOMBARDINI 15LD440 STD D=86mm

COMPLETE TANK KIT WITH PLATE BANDS NAFTA FILTER SUPPORT TUBE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8103.040

ALTERNATOR LDA450/510 4LD640 LDA100 EXTRA CEE TYPE GREAVES

OIL FILTER WITH CARTRIDGE ad. LOMBARDINI 15LD400/440

STEEL CYLINDER ad. LOMBARDINI 15LD400/440 STD REF. ORIG. 1526.264

SMIRROR GASKET SERIES ad. LOMBARDINI LDA100 4LD705

RUBBER VALVE ad.LOMBARDINI 15LD440

CYLINDER HEAD BRONZE ad. LOMBARDINI LDA100 4LD640/705 LDA90/96 LDA670/672/673/674 STD REF. ORIG. 1640.025.262

ORIGINAL LOMBARDINI 25LD POWER REGULATOR REF. ORIG.73623830

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4330.023.291

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 FIRST ADDITION 0.25mm ORIGINAL REF. 1610.087.276

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1610.087.276

ORIGINAL LOMARDINI AIR FILTER SPONGE 15LD225

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 5LD825/2-3-4 LDA832/833/834 DECENTRAL CHAMBER STD D=100mm

OIL PUMP ad. LOMBARDINI 5LD675-2 5LD825-2 LDA834 REF. ORIG. 6605.020

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA100 4LD640/705/820 REF. ORIG. 6410.037.96

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD640 LDA96/97

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

AC PUMP SUPPLY ad. LOMBARDINI 8LD665 LDA914

AC PUMP SUPPLY ad. LOMBARDINI LDA670/672/673/674

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 DECENTRAL CHAMBER SECOND MAJOR D=83mm ORIGINAL REF. 6500.734.530

CYLINDER BASE GASKET ad. LOMBARDINI LDA100 4LD705

CYLINDER HEAD GASKET ad. LOMBARDINI LDA100 4LD705

ORIGINAL ALUMINIUM WHITCH ad. LOMBARDINI 15LD225 STD REF. ORIG. 15261960

SPRING FOR DISTANCE STOP CONTROL REGULATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

CENTRAL BANK BRONZE ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1640.046

BRONZE BANK CENTRAL ad. LOMBARDINI LDA670/672/673/674 FIRST SURCHARGE 0.25 REF. ORIG. 1640.047

TUBE FOR TANK ad. LOMBARDINI LDA450/510 3LD510

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD400

SMERIGLIO SERIES ad. LOMBARDINI LA/LAL 400

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 D=95mm ORIG. REF. 4898.007

BRONZINE BIELLA HEAD ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA670

BIELLA FOOT BRONZE ad. LOMBARDINI LDA820

BIELLA FOOT BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

MOTOR SHAFT CAPS ad. 6LD325/360/400 LDA520/530

GAS TANK BOLT ad. LOMBARDINI 15LD225/315/350

AIR FILTER INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

OIL PRESSURE STOP VALVE ad. LOMBARDINI 15LD315

MOTOR SHAFT KEY ad. LOMBARDINI LDA450/510 3LD510

RUBBER VALVE ad. LOMBARDINI 6LD360/400/435

COMPLETE PISTON + SEGMENT SERIES ad. BETA B 110/117 D= 55.6mm

EXHAUST VALVE GUIDE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 4845.219.196

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

CYLINDER BASE SEAL ad. LOMBARDINI 4LD640 THICKNESS 0.3mm

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

REMOTE STOP CONTROL COVER MOTOP PUMP VERSION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI 15LD315 15LD350

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD325 LDA520

FILTERING MASS GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9685.039.520

INLET VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9652.025.520

FILTERING MASS GASKET ad. LOMBARDINI LDA450/510 3LD510

OIL FILTER SUPPORT GASKET ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD360

MOTOR SHAFT KEY ad. LOMBARDINI 6LD 325/360/400/435

REMOTE STOP CONTROL COVER ad. LOMBARDINI LDA 450/LDA 510 LDA 96/97 4LD640 LDA100 4LD705 4LD820

INLET VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.166.500

EXHAUST VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.168.500

BRONZE SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA100 4LD640 LDA820

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 SECOND SURCHARGE 0.50

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 FIRST SURCHARGE 0.25

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25 REF. ORIG. 1610.025.272

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD400

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=79mm

SEMICARTER ad. LOMBARDINI 15LD400 REF. ORIG. 6645.712

OIL DISCHARGE PLUG ad. LOMBARDINI 6LD360/400/435 3LD510

MOTOR SHAFT BEARING ad. LOMBARDINI 15LD315

PUMPING ACME ADN37/43 REF. ORIG. 660.101 - 660.012

OIL LEVEL RANGE FOR SEP ad. LOMBARDINI LDA100 4LD640/820

CAMMES SHAFT ad. LOMBARDINI 6LD325/360/400/435

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA 670/672/673

AIR INLET AND EXHAUST VALVE KIT ad. LOMBARDINI LDA 670/672/673

CARTER ad. LOMBARDINI LDA 450/510

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA 832 5LD 825/2 REF. ORIG. 8180.040 + 8180.068

COMPLETE GASKET SERIES ad. LOMBARDINI LA LAL400 ENGINE

FULL PISTON ad. LOMBARDINI 4LD640 LDA96/97 CENTRAL CHAMBER SECOND MAJOR D=96mm

ALUMINIUM BLADE ad. LOMBARDINI 15LD350 0.25

ALUMINIUM WHITCH ad. LOMBARDINI 15LD350 STD

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA830/2/3/ 5LD825/2/3/4 D=100mm ORIG. REF. 4898.008

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 SECOND MAJOR D=79mm

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 SECOND ADDITION D=86mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 FIRST ADDITION D=102.50mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 SECOND ADDITION D=103mm

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 SECOND ADDITION D=83mm

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.091.272

ORIGINAL LOMBARDINI 15LD225 TANK

FULL PISTON ad. LOMBARDINI 9LD625/2 11LD625/2/3 DECENTRAL CHAMBER STD D=95mm

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=87mm

EXHAUST VALVE ad. LOMBARDINI 6LD360/400/435

ASPIRATION VALVE ad. LOMBARDINI 6LD360/400/435

PLASTIC OIL VENT PLUG ad. LOMBARDINI 15LD225/315/350

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/451/510 3LD510 LDA80

FULL PISTON ad. LOMBARDINI 15LD315 D=79mm ORIGINAL REF. 6501.252.196

GEAR RPM REGULATOR ad. LOMBARDINI 6LD360/400/435

STEEL CYLINDER ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

VALVE ad. LOMBARDINI LDA450/510 4LD640 4LD820 LDA96/97/100

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA450 D=85mm ORIG. REF. 2380.074.283

ALUMINIUM BLADDER ad. LOMBARDINI 15LD350 0.50

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

COPPER WASHER FOR PUMP TANK CONNECTION TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI LDA100/820/640 30x50x10 RSX REF. ORIG. 1213.058.9

CARTRIDGE DRAIN ad. LOMBARDINI 15LD225/315/350 REF. ORIG. 210.58.194

ELECTRIC STARTER FLYWHEEL SIDE GASKET ad. LOMBARDINI 15LD315/350

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 15LD315

ELECTRIC START AIR FILTER COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

MARKET + EXHAUST COLLECTOR ad. LOMBARDINI 15LD315/350

EXHAUST HOSE COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

INJECTION TUBE ad. LOMBARDINI 15LD315/350

AIR FILTER CURVE ad. LOMBARDINI 15LD315/350

PUNTERIE COVER ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 2125.269

SEAL COVER PUNTERIE ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 4400.097

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 STD REF. ORIG. 1611.185.196

PIPETTA CANDELA ad. LOMBARDINI INTERMOTOR

DISTANCE STOP CONTROL SPRING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP CONTROL LEVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

REMOTE STOP CONTROL COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP COMMAND KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ACCELERATOR CONTROL KIT + DISTANCE STOP COVER ad. LOMBARDINI LDA450/510 3LD510

ADJUSTABLE MOTOR SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

PUNTERIA TUBE GUIDE ad. LOMBARDINI LDA450/510 3LD510

GEAR RPM REGULATOR ad. LOMBARDINI 15LD315/350/225

GEAR RPM REGULATOR ad. LOMBARDINI LDA450/510 3LD510

COMPLETE BILANCER GROUP ad. LOMBARDINI 6LD325/360/400/435 REF. ORIG. 4330.039.540

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA520/530 REF. ORIG. 4330.003.502

KIT ACCESSORIES BILANCE GROUP ad. LOMBARDINI LDA450/510 3L510

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4330.021.28

COMPLETE PRESSURE VALVE KIT ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE GUIDE KIT + EXHAUST VALVE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4845.154.285+4845.156.285

INLET VALVE + EXHAUST VALVE KIT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 9652.017.283+9685.027.283

INLET & EXHAUST VALVE KIT + VALVE GUIDE ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD ad. LOMBARDINI 15LD315 REF. ORIG. 9200.487

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI 6LD435

CYLINDER HEAD COMPLETE WITH VALVES FOR STRAIGHT GAMBO INJECTOR PORT ad. LOMBARDINI 6LD360/400

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP MOUNTED TO. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT MOUNTED to. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CARTER ad. LOMBARDINI 15LD400

ENGINE CARTER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1511.089.283

CARTER ad. LOMBARDINI 6LD360/400 REF. ORIG. 1519.216.520

OIL PUMP ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6605.045

OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6372.075.530

FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.096.530

CONVEYOR KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3790.040.530

ALUMINIUM ENGINE SUPPORT BRACKET ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6360.073.540

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6370.420.540

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.078.530

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6370.326.283

VOLTAGE SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2569.616.283

CONVEYOR KIT ad. LOMBARDINI LDA450/510 3LD510

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3855.097.283

BRACKET SUPPORT ENGINE PLATE ALLUMINIUM ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6371.097.283

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 5066.015.283

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2568

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA450/510 3LD510

FULL FLYWHEEL SIDE DISTRIBUTION CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

COMPLETE CYLINDER + PISTON KIT ad. LOMBARDINI LDA914 7LD865 8LD665 D=95mm

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

FLYWHEEL + STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START ROTOR MAGNET ad. LOMBARDINI 15LD315/350/400/440 REF. ORIG. LOMBARDINI 2002.019

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ALTERNATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/75 Z=94 REF. ORIG. 2816.1020

STARTER CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2816.036.530

STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2816.038.283

STARTER CROWN ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 2816.011.270

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

START MOTOR ad. LOMBARDINI BOSCH LDA100 4LD640 LDA820 REF. ORIG. 0.101.109.012-5840.143.272

START MOTOR ad. LOMBARDINI LDA830/832/833 BOSCH

ELECTRIC START KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ELECTRIC START KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START KIT ad. LOMBARDINI LDA100 4LD640 LDA820

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

BRONZE KIT CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

OIL PUMP ad. LOMBARDINI 9LD560/2 9LD625/2 10LD360/2 10LD400/2 12LD 435/2 12LD475/2

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm ORIGINAL REF. 1640.084.435

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm ORIGINAL REF. 1640.083.435

BRONZINE BIELLA HEAD ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1640.082.435

BRONZE FOOT WHITE ad. LOMBARDINI LDA450/510 3LD510 0.50mm

BRONZE BELLOW FOOT ad. LOMBARDINI LDA450/510 3LD510 0.25mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1630.007.271

BRONZINE HEAD ad. LOMBARDINI LDA450/510 3LD510 0.50mm ORIGINAL REF. 1640.029.271

BRONZINE HEADS BIELLA ad. LOMBARDINI LDA450/510 3LD510 0.25mm ORIGINAL REF. 1640.028.271

BIELLA HEAD BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 FIRST MINORITY 0.25mm ORIG. REF. 1611.185.196

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.50

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.25

BRONZE KIT CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 STD

BIELLA ad. LOMBARDINI 9LD625/2

ALUMINIUM BLADE ad. LOMBARDINI 15LD315 0.25

ALUMINIUM CYLINDER ad. LOMBARDINI 15LD315 STD

STEEL BLADE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1050.115.500

STEEL BLADE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

FLYWheel SIDE SUPPORT WITH BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 8675.135.500

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8576.097.270

WHEEL SIDE SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8676.098.292

WHEEL SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8675.067.270

TREE A CAMMES ad. LOMBARDINI LDA450/510 3LD510

MOTOR SHAFT ad. LOMBARDINI 9LD625/2

MOTOR SHAFT ad. LOMBARDINI 8LD665/2 LDA914

MOTOR SHAFT ad. LOMBARDINI LDA672

MOTOR SHAFT ad. LOMBARDINI 15LD315/350 REF. ORIG. 1050.8560

MOTOPOMPA VERSION MOTOR SHAFT ad. LOMBARDINI LDA530 6LD360/400

MOTOR SHAFT ad. LOMBARDINI TILLER VERSION 6LD325/360/400 LDA520/530 REF. ORIG. 1050.115.500

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1050.360.292

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1051.013.292

AGRICULTURAL VERSION MOTOR SHAFT SHAFT TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.005.270

PUNTERIE COVER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 2125.103.540

PUNTERIE COVER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2125.193.283

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA450/510 3LD510

PUNTERIE COVER ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.083.272

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.073.272

SEGMENT SERIES ad. LOMBARDINI 15LD350 D= 82.50mm ORIGINAL REF. 8211.240.197

FULL PISTON ad. LOMBARDINI 15LD350 STD D=82mm ORIGINAL REF. 6501.487.197

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=78.50mm ORIG. REF. 8211.228.196

SEGMENT SERIES ad. LOMBARDINI 15LD315 STD D=78mm ORIG. REF. 8211.227.196

FULL PISTON ad. LOMBARDINI 15LD315 D=78.50mm ORIGINAL REF. 6501.251.196

FULL PISTON ad. LOMBARDINI 15LD315 STD D=78mm ORIGINAL REF. 6501.250.196

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 8210.081.520

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 8210.080.520

FULL PISTON ad. LOMBARDINI LDA 520 6LD325 D=79mm

FULL PISTON ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 6502.029.520

FULL PISTON ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 6502.028.520

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD435 D=86mm PIN=22mm ORIGINAL REF. 2380.172.530

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=86.50mm ORIGINAL REF. 8211.017.540

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 STD D=86mm ORIGINAL REF. 8211.056.540

FULL PISTON ad. LOMBARDINI 6LD400 D=86mm STD DECENTRAL CHAMBER

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 8211.046.530

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIG. REF. 8211.045.530

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIGINAL REF. 6500.733.530

FLYWHEEL + STARTING CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD360 D=82mm REF. ORIG. 2380.453.530

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI 6LD360 STD D=82mm ORIG. REF. 2380.453.530

ENGINE CARTER ad. LOMBARDINI 15LD315

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 STD D=85mm ORIGINAL REF. 8210.055.283

FULL PISTON ad. LOMBARDINI LDA510 3LD510 STD D=85mm ORIGINAL REF. 6501.073.292

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 D=85.50mm ORIGINAL REF. 8210.056.283

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 STD D=95 REF. ORIG. 8210.052.276

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI LDA510 STD D=85mm QUADRATED CYLINDER V.T. ORIG. REF. 2380.074.283

KIT CYLINDER + COMPLETE PISTON + SERIES SPINDLE ad. LOMBARDINI 3LD510 STD D=85mm N.T. ROUND CYLINDER REF. ORIG. 2380.083.292

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIG. REF. 6502.070.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=102.50mm ORIGINAL REF. 6502.071.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIGINAL REF. 6502.070.291

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD820 LDA820 D=102mm ORIG. REF. 2380.172.530

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97 D=95.50mm ORIG. REF. 6500.071.272

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA 96/97 STD D=95mm ORIG. REF. 6500.070.272

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD640 LDA96/97 D=95mm ORIG. REF. 2380.4530.530

SEGMENT SERIES ad. LDA100 4LD705 D=100.50mm ORIGINAL REF. 8210.050.279

SEGMENT SERIES ad. LDA100 4LD705 STD D=100mm ORIGINAL REF. 8210.049.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 DECENTRAL CHAMBER FIRST MAJOR D=100.50mm ORIGINAL REF. 6501.022.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 STD D=100mm ORIGINAL REF. 6501.021.279

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA100 4LD705 D=100mm ORIG. REF. 2380.132.540

4-BAND SEGMENT SERIES ad. LOMBARDINI 4LD640/4LD96/4LD97 D=95.50mm ORIGINAL REF. 8210.053.276

ROPE + IMPUGNATION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. PASCHAL LOMBARDINI

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.009.270

MARMIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5462.089.500

MARKET FOR ELECTRIC STARTING LONG NECK TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 5462.090

QUADRED MARKET ad. LOMBARDINI RUGGERINI LDA450/510 3LD510 LDA100/820 4LD640/820 RUGGERINI RF120/140 REF. ORIG. 5460.432

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.025.272

CURVE FOR LONG-TYPE MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

EXTENSION FOR LONG TYPE MARMITAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

SILENCER MARKET LONG TYPE ad. ENGINE LOMBARDINI LDA450 LDA510 3LD510 LDA100 LDA820 4LD640 4LD820 9LD625 2 9LD626 2 SERIES 5LD REF. ORIG. 5461.047

LONG TYPE GASKET KIT + PROLONG + CURVE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD REF. ORIG. 5461.047

PANEL FILTER ELEMENT ad. LOMBARDINI 15LD225 RUGGERINI RY REF. ORIG. 2175180

DRY AIR FILTER ELEMENT ad. LOMBARDINI 15LD315/350

AIR FILTER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=127mm H=123mm

AIR FILTER TANK ad. LOMBARDINI LDA450/510 3LD510 D=155mm H=100mm

AIR FILTER TANK ad. LOMBARDINI LDA100/820 4LD640/820 D=155 H=122

AIR FILTER SPONGE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 5496.110

FILTER MASS WITH SMALL EDGE TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=101mm H=63mm

FILTER MASS WITH EDGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5496.057 D=131mm H=95mm

FILTER MASS WITH EDGE ad. LOMBARDINI LDA100/820 4LD640/820 D=150mm H=107mm

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28X40X7 RSX 15LD225/15LD315/15LD350 REF. ORIG. 1213.345.196

AIR FILTER COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 2125.055.500

AIR FILTER COVER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 2125.056.291

TRANSPARENT PREFILTER NEW TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 1301.069.291

TRANSPARENT PREFILTER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1301.053.500

TRANSPARENT PREFILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 1301.069.291

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

AIR FILTER WITH HAT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.111.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.102.292

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI LDA450/510 3LD510 15LD315/350/500 REF. ORIG. 3700.3730

AIR FILTER WITH HAT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.372.292

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.140.272

AIR FILTER WITH HAT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.139.272

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIG. REF. 1210.092.9

DISCHARGE VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28x38x7 RSX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9

REAR DRIVE SIDE OIL SEAL + FLYWHEEL ad. LOMBARDINI 28x38x7 RSX 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9 1210.092.9

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 40x60x10 RDX LDA450/510 3LD510 ORIGINAL REF. 1210.076.9

REAR DRIVE SIDE OIL SEAL + WHEEL ad. LOMBARDINI 30x47x7 RP 40x60x10 RDX LDA450/510 3LD510 ORIGIN REF. 1213.060.9 1210.076.9

RUBBER CANNOTTO ad. LOMBARDINI 6LD325 LDA520/530 REF. ORIG. 4740.018

RUBBER CANNOTTO ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 4740.025

CANNOTTO RUBBER ad. ENGINE LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 4740.017

SEAL COVER PUNTERS ad. LOMBARDINI 6LD325/360/400/435

PUNTERIA COVER GASKET ad. LOMBARDINI LDA450/510 3LD510

SEAL COVER PUNTERIA ad. LOMBARDINI LDA100 LDA820 4LD640/820

PUNTER HOSE ad. LOMBARDINI LDA450/LDA510 REF. ORIG. 9520.039.273

EXHAUST GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 4500.091

ASPIRATION GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4500.092.520

PUNTER HOSE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820 REF. ORIG. 9520.023.270

INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

ASPIRATION GASKET ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4500.067.283

OIL COUP SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4601.003.520

OIL COUPLE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OIL COUP SEAL ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4600.090.283

OIL COUPLE ad. LOMBARDINI LDA450/510 3LD510

OIL COUP SEAL ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4600.091.270

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 9LD625/2

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA672 REF. ORIG. 8180.028.276

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD315 REF. ORIG. 8180.179.196

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD400/435 REF. ORIG. 8180.063.540

COMPLETE GASKET SERIES ad. LOMBARDINI 6LD360 REF. ORIG. 8180.082.530

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD360 REF. ORIG. 8180.082.530

COMPLETE GASKET SERIES ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 8180.033.283

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 8180.033.283

COMPLETE GASKET SERIES ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

COMPLETE GASKET SERIES ad. LOMBARDINI LDA100 4LD705 REF. ORIG. 8180.027.279

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA100 4LD705 REF. ORIG. 8180.027.279

COMPLETE INJECTION PUMP ad. LOMBARDINI LDA672/832 5LD675/825/2 8LD600/665/740-2/904/914 9LD560-2/625-2 REF. ORIG. 6590.034

INJECTOR HOLDER COMPLETE ad. LOMBARDINI 15LD315/350 REF. ORIG. 5010.040.196

COMPLETE INJECTION PUMP ad. LOMBARDINI 15LD315/350 REF. ORIG. 6590.259.196

FULL INJECTOR HOLDER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 5010.040.196

COMPLETE INJECTION PUMP ad. LOMBARDINI 6LD360 6LD400 6LD435 REF. ORIG. 6590.073

FULL INJECTOR DOOR OLD TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 6531.265

FULL INJECTOR HOLDER ad. LOMBARDINI LDA450 3LD510 REF. ORIG. 6531.265

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA450/510 LDA96/97/100/ 4LD640/820 REF. ORIG. 6590.033

VALVE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

POLVERIZER ad. LOMBARDINI LDA520/530 REF. ORIG. 6531.095.520

POLVERIZER TYPE SHORT ad. LOMBARDINI 6LD360/400 L=4cm ORIGINAL REF. 631.104.395

FRONT WHEEL SEAL SIDE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 45x62x10

POLVERIZZATORE TYPE LONG ad. LOMBARDINI 6LD360/400 L=53mm ORIG. REF. 631.104.395

VALVE SPRING ad. LOMBARDINI 6LD360/6LD400/6LD435 LDA520/LDA530 COD. ORIG. 5755.045.500

POLVERIZER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF ORIG. 6531.265.710

PUMPER ad. LOMBARDINI LEFT PROPELLER LDA520 LDA530 REF. ORIG. 6578.038.530

PUMPING ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 6578.133.540

DISCHARGE VALVE GUIDE ad. LOMBARDINI LDA 450 LDA510

PUMPER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 LDA914 5LD 8LD 9LD REF. ORIG. 6578.013.283

OIL FILTER ad. LOMBARDINI 15LD315/225/350/400/440 REF. ORIG. 2175.155.196

OIL FILTER LONG TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OIL FILTER TYPE SHORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

NAFTA FILTER ad. LOMBARDINI 15LD225 REF. ORIG. 2175.182

TUBE CONNECTION TANK RECOVERY 3-WAY ad. LOMBARDINI 15LD315/350 RUGGERINI RY 50/70/75/103/110 REF. ORIG. 9375.983

3-WAY NAFTA FILTER ad. LOMBARDINI 15LD315 RUGGERINI RY 50/70/75/103/110 REF. ORIG. 3730.096

NAFTA FILTER SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2175.032.500

NAFTA FILTER WITH SEAL ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2175.032.500

NAFTA FILTER SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.009.273

NAFTA FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

NAFTA FILTER WITH SEAL ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 7LD 8LD 9LD 10LD REF. ORIG. 2175.009.273

PIN FOR OIL FILTER SUPPORT LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

LOMBARDINI OIL FILTER SUPPORT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

OIL FILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SCREW FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT GASKET ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

COUPLE FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

NAFTA FILTER SUPPORT + GASKET + ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2605.028.500

NAFTA FILTER SUPPORT KIT + TUBE + NAFTA FILTER WITH GASKET AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2605.028 + 2175.032

NAFTA FILTER SUPPORT + GASKET + ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820 RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 2605.033.273

NAFTA FILTER SUPPORT + TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2605.033.273

NAFTA FILTER SUPPORT KIT + TUBE + NAFTA FILTER WITH GASKET AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2605.033.273

GAS TANK FIXING BOLT ad. LOMBARDINI LDA450/510 3LD510 LDA96/97/100/820 4LD640/820

STARTER PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

PLASTIC OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9050.050

OLD TANK CAP TYPE ad. LOMBARDINI LDA450 LDA96/97 REF. ORIG. 9043.037.285

GAS TANK CAP ad. LOMBARDINI 15LD315/350 REF. ORIG. 9043.079.183

ORIGINAL GAS TANK CAP ad. LOMBARDINI 15LD315/350 REF. ORIG. 9043.079.183

TANK CAP ad. LOMBARDINI 6LD360 LDA450/510 LDA96/97/100 4LD640 4LD820 7LD 8LD 9LD 11LD 12LD AND VARIOUS REF. ORIG. 9043.025

ALUMINIUM OIL VENT PLUG ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS REF. ORIG. 9055.003

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 D=96mm ORIGINAL REF. 8210.054.276

NEW ALUMINIUM OIL VENT PLUG TYPE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 9055.003

FLYWheel PROTECTION NETS ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA450/510 3LD510

PULEGE START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6960.069

PUNTERIA ASTA ad. LOMBARDINI LDA530/LDA520

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

PULEGE START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6961.029

PULEGE START ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 6961.061.0395

UPPER PLATE POGGIA VALVE SPRING + VALVE SEEDS ad. LOMBARDINI LDA450/LDA510 REF. ORIG. 6410.017.271

TANK TUBE ad. LOMBARDINI LDA450/510 3LD510

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD400 D=86mm REF. ORIG. 2380.132.540

INJECTION TUBE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 9372.090.500

POWER TUBE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 9375.204.500

PUMP CONNECTION TUBE WITH THREE EYELETS FOR TANK WITH SCREW ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

OIL EXHAUST COVER WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

TANK PLATE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8866.053.500

TANK SPRING ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

RUBBER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 4701.010.500

TANK BAND ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3617.010.500

OIL LEVEL RANGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1400.386

OIL LEVEL RANGE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1400.364

OIL LEVEL RANGE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 1400.362

ELASTIC PLUG FOR TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

NOTCH FOR TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SCREWS FOR TANK ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ORIGINAL TANK ad. LOMBARDINI 15LD315/350 REF. ORIG. 8103.269.196

PLASTIC TANK ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/85 REF. ORIG. 8103.269.196

TANK KIT + CAP + SUPPORT + NAFTA FILTER + GASKET + PIPES + ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

V.T. TANK WITH CAP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8101.70.270

GAS TANK WITH CAP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8101.070

OIL FILTER ad. LOMBARDINI LDA672/LDA832/LDA833/LDA834 RUGGERINI RD951 RD95/1

CYLINDER BASE GASKET ad. LOMBARDINI LDA450/LDA510

VALVE SPRING ad. LOMBARDINI LDA450/LDA510 LDW COD. ORIG. 5755.005.271

SMERIGLIO GASKET SERIES + RUBBER RUBBERS AND VALVES ad. LOMBARDINI LDA450/LDA510 3LD510

N.T. EXHAUST VALVES ad. LOMBARDINI 6LD360

AIR INLET VALVE SEAT ad. LOMBARDINI 6LD360/6LD400/6LD435 LDA450/LDA510 COD. ORIG. 8000.036.283

CYLINDER BASE SEAL ad. LOMBARDINI 4LD820

INLET VALVE GUIDE ad. LOMBARDINI LDA450 LDA510 REF. ORIG. 4845.134.285

THREE-WAY TUBE CONNECTION FITTING FITTINGS for ad. LOMBARDINI 15LD315 RUGGERINI RY 50/70/75/103/110

PUNTERIA COVER GASKET ad. LOMBARDINI LDA450/LDA510

EXHAUST GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

EXHAUST VALVE SEAT ad. LOMBARDINI 6LD360/6LD400/6LD435 COD. ORIG. 8000.037.283

PLATE SPRING PLATE ad. LOMBARDINI LDA520 6LD325 LDA530 6LD360/6LD400/6LD435 REF. ORIG. 3430.070.500

INLET VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820 REF. ORIG. 4845.160.291

CYLINDER BASE GASKET ad. LOMBARDINI LDA520 6LD325

PLATE + SEMICONES ad. LOMBARDINI 4LD640 LDA96/97 4LD705 LDA100 4LD820 COD. ORIG. 6410.018.260

VALVE SPRING ad. LOMBARDINI 4LD705 LDA100 4LD640 LDA96/97 4LD820 LDA820 REF. ORIG. 5755.004.260

UPPER PLATE ad. LOMBARDINI LDA520 LDA 530 6LD325 6LD360/400/435 REF. ORIG. 6410.035.500

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA450/LDA510 3LD510 REF. ORIG. 6410.038.285

N.T. EXHAUST VALVE ad. LOMBARDINI 6LD435

EXHAUST VALVE ad. LOMBARDINI 15LD225 COD. ORIG. 9652.149.194

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD325 LDA520

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD820

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD400/435

N.T. INLET VALVE ad. LOMBARDINI 6LD435

OIL LEVEL ROD ad. LOMBARDINI 15LD315/350 REF. ORIG. 1400.233

FLYWHEEL ROTOR ad. LOMBARDINI 15LD315/350 REF. ORIG.8565.078

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD315

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD400/440 REF. ORIG. 1051.229

VOLLEY SIDE OIL SEAL ad. LOMBARDINI 15LD 225/315/350 (35X52X6) REF. ORIG. 1213.361

START MOTOR ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/75 REF. ORIG. 001.107.046

PUNTERIE COVER ad. LOMBARDINI 6LD325 LDA520/530 REF. ORIG. 2125.208.500

LOMBARDINI OIL FILTER SUPPORT ad. LOMBARDINI LDA450/510 3LD510 LDA100 4LD640/820

SPALLING WASHER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA510 D=85mm QUADRATED CYLINDER V.T. ORIG. REF. 2380.074.283

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

Yanmar/ Made in China

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

COMPLETE DIESEL 10 HP ENGINE WITH TORO STRAP START YANMAR TYPE ENGINES TMYD186 CONICAL 23mm

COMPLETE 10 HP DIESEL ENGINE WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD186 CONICAL 23mm

INJECTION PUMP ad. YANMAR L100 LA186

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

ENGINE FLANGE ad. YANMAR L100 LA186

SELF-AVOLVING CUP ad. YANMAR L100 LA186

BATH OIL BATH AIR FILTER ASPIRATION COLLECTOR ad.YANMAR KAMA VULCAN AND VARIOUS MADE IN CHINA L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L100 LA186

OIL BATH AIR FILTER MARKET ad. YANMAR L100 LA186/188

INJECTION TUBE ad. YANMAR L00 LA186

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L100 LA186

BALANCE GROUP ad. YANMAR L100 LA186

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

OIL BATH AIR FILTER WITH HAT ad. YANMAR L100 LA186

ENGINE CARTER COVER ad. YANMAR L100 LA186

ENGINE CARTER ad. YANMAR L100 LA186

BRONZINE HEAD ad. YANMAR L100 LA186 0.50mm

BRONZINE HEAD ad. YANMAR L100 LA186 0.25mm

CYLINDER HEAD BRONZE ad. YANMAR L100 LA186 STD

BANK BRONZE ad. YANMAR L100 LA186 0.50mm

BANK BRONZE ad. YANMAR L100 LA186 0.25mm

BANK BRONZE ad. YANMAR L100 LA186 STD

STEEL CYLINDER ad. YANMAR L100 LA186

OIL PUMP ad. YANMAR LA186

POWDER ad. YANMAR V.T. SHORT TYPE L100 LA186

POWDER ad. YANMAR N.T. LONG TYPE L100 LA186

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER SHORT TYPE V.T. L100 LA186

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER LONG TYPE N.T. L100 LA186

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L100 LA186

START PULLEY ad. YANMAR L100 LA186

PUNTERIE COVER ad. YANMAR L100 LA186

MOTOR SHAFT OIL SEAL ad. YANMAR L100 LA186 35x50x8

CYLINDER HEAD GASKET ad. YANMAR L100 LA186

COMPLETE GASKET SERIES ad. YANMAR L100 LA186

START SPRING ad. YANMAR L70/100 LA178/186

SELF-REVOLVING PUSHING ad. YANMAR L48/70/100 LA170/178/186

SELF-AVOLVING CRICKET ad. YANMAR L48/70/100 LA170/178/186

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L100 LA186

STARTING CROWN ad. YANMAR L100 LA186

REGULATOR ad. YANMAR L48/70/100 LA170/178/186

ALTERNATOR ad. YANMAR L48/70/100 LA170/178/186

START MOTOR ad. YANMAR L48/70/100 LA170/178/186

ELECTRIC START KIT ad. YANMAR L100 LA186

MARMIT ad. YANMAR L100 LA186

SEGMENT SERIES ad. YANMAR L100 LA186 D=86.50mm

SEGMENT SERIES ad. YANMAR L100 LA186 D=86.25mm

SEGMENT SERIES ad. YANMAR L100 LA186 STD D=86mm

FULL PISTON ad. YANMAR L100 LA186 STD D=86.50mm

FULL PISTON ad. YANMAR L100 LA186 STD D=86mm

DRY AIR FILTER ELEMENT ad. YANMAR L100 LA186/188 ORIGINAL REF. 114650 - 12540 L=152mm H=71mm

OIL FILTER ad. YANMAR L48/70/100 LA170/178/186

NAFTA FILTER ad. YANMAR L100 LA186

TANK SUPPORT BRACKET ad. YANMAR L100 LA186

TANK FILTER ad. YANMAR L48/70/100 LA170/178/186

LEFT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

RIGHT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

ANTIVIBRANTE SERBATOIO ad. YANMAR L48/70/100 LA170/178/186

TANK CAP ad. YANMAR L48/70/100 LA170/178/186

TANKSET WITH CAP AND FILTER TANKSET ad. YANMAR L100 LA186/188

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

MOTOR SHAFT OIL SEAL N. T ad. YANMAR L48 LA170 25x42x10

ENGINE FLANGE ad. YANMAR L48 LA170

START SPRING ad. YANMAR L48 LA170

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L48 LA170

INJECTION TUBE ad. YANMAR L48 LA170

BALANCE GROUP ad. YANMAR L48 LA170

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L48 LA170

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

OIL BATH AIR FILTER WITH 3-HOLE HAT ad. YANMAR L48/70 LA170/178

ENGINE CARTER COVER ad. YANMAR L48 LA170

ENGINE CARTER ad. YANMAR L48 LA170

BRONZINE BOTTLE HEAD ad. YANMAR L48 LA170 0.50mm

BRONZINE HEAD ad. YANMAR L48 LA170 0.25mm

CYLINDER HEAD BRONZE ad. YANMAR L48 LA170 STD

BANK BRONZE ad. YANMAR L48 LA170 0.50mm

BANK BRONZE ad. YANMAR L48 LA170 0.25mm

BANK BRONZE ad. YANMAR L48 LA170 STD

STEEL CYLINDER ad. YANMAR L48 LA170

POWDER ad. YANMAR V.T. TYPE SHORT L48/70 LA170/178

POWDER ad. YANMAR N.T. TYPE LONG L48/70 LA170/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER SHORT TYPE V.T. L48/70 LA70/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER LONG TYPE N.T. L48/70 LA70/178

INJECTION PUMP ad. YANMAR L48/70 LA170/178

EXHAUST VALVE ad. YANMAR L48 LA170

ASPIRATION VALVE ad. YANMAR L48 LA170

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L48 LA170

START PULLEY ad. YANMAR L48 LA170

PUNTERIE COVER ad. YANMAR L48/70 LA170/178

MOTOR SHAFT OIL SEAL ad. YANMAR L48 LA170 30x45x10

CYLINDER HEAD GASKET ad. YANMAR L48 LA170

COMPLETE GASKET SERIES ad. YANMAR L48 LA170

START SPRING ad. YANMAR L70/100 LA178/186

SELF-REVOLVING PUSHING ad. YANMAR L48/70/100 LA170/178/186

SELF-AVOLVING CRICKET ad. YANMAR L48/70/100 LA170/178/186

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L48 LA170

STARTING CROWN ad. YANMAR L48 LA170

REGULATOR ad. YANMAR L48/70/100 LA170/178/186

ALTERNATOR ad. YANMAR L48/70/100 LA170/178/186

START MOTOR ad. YANMAR L48/70/100 LA170/178/186

ELECTRIC START KIT ad. YANMAR L48 LA170

SEGMENT SERIES ad. YANMAR L48 LA170 D=70.50mm

SEGMENT SERIES ad. YANMAR L48 LA170 D=70.25mm

SEGMENT SERIES ad. YANMAR L48 LA170 STD D=70mm

FULL PISTON ad. YANMAR L48 LA170 STD D=70mm

DRY AIR FILTER ELEMENT ad. YANMAR L48/70 LA170/178 ORIG. REF. 114250-12580 D=114mm H=45mm

OIL FILTER ad. YANMAR L48/70/100 LA170/178/186

NAFTA FILTER ad. YANMAR L48 LA170

TANK SUPPORT BRACKET ad. YANMAR L48 LA170

TANK FILTER ad. YANMAR L48/70/100 LA170/178/186

LEFT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

RIGHT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

ANTIVIBRANTE SERBATOIO ad. YANMAR L48/70/100 LA170/178/186

TANK CAP ad. YANMAR L48/70/100 LA170/178/186

TANK TANK WITH CAP AND FILTER TANK FILTER ad. YANMAR L48 LA170

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

PISTONE COMPLETO ad. YANMAR L70 LA178 D=78,25mm

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

COMPLETE DIESEL ENGINE 7 HP WITH TORO STRAP START YANMAR TYPE ENGINES TMYD178 CONICAL 23mm

COMPLETE DIESEL ENGINE 7 HP WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD178 CONICAL 23mm

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

ENGINE FLANGE ad. YANMAR L70 LA178

OIL BATH AIR FILTER WITH 2-HOLE HAT ad. YANMAR L48/70 LA170/178

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L70 LA178

INJECTION TUBE ad. YANMAR L70 LA178

BALANCE GROUP ad. YANMAR L70 LA178

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

OIL BATH AIR FILTER WITH 3-HOLE HAT ad. YANMAR L48/70 LA170/178

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L70 LA178

ENGINE CARTER COVER ad. YANMAR L70 LA178

ENGINE CARTER ad. YANMAR L70 LA178

BRONZINE HEAD ad. YANMAR L70 LA178 0.50mm

BRONZINE HEAD ad. YANMAR L70 LA178 0.25mm

BANK BRONZE ad. YANMAR L70 LA178 0.50mm

BANK BRONZE ad. YANMAR L70 LA178 0.25mm

BANK BRONZE ad. YANMAR L70 LA178 STD

CYLINDER FOOT BRONZE ad. YANMAR L70 LA178 STD

STEEL CYLINDER ad. YANMAR L70 LA178

POWDER ad. YANMAR V.T. TYPE SHORT L48/70 LA170/178

POWDER ad. YANMAR N.T. TYPE LONG L48/70 LA170/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER SHORT TYPE V.T. L48/70 LA70/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER LONG TYPE N.T. L48/70 LA70/178

INJECTION PUMP ad. YANMAR L48/70 LA170/178

EXHAUST VALVE ad. YANMAR L70 LA178

ASPIRATION VALVE ad. YANMAR L70 LA178

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L70 LA178

START PULLEY ad. YANMAR L70 LA178

PUNTERIE COVER ad. YANMAR L48/70 LA170/178

MOTOR SHAFT OIL SEAL ad. YANMAR L70 LA178 30x45x10

CYLINDER HEAD GASKET ad. YANMAR L70 LA178

COMPLETE GASKET SERIES ad. YANMAR L70 LA178

START SPRING ad. YANMAR L70/100 LA178/186

SELF-REVOLVING PUSHING ad. YANMAR L48/70/100 LA170/178/186

SELF-AVOLVING CRICKET ad. YANMAR L48/70/100 LA170/178/186

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L70 LA178

STARTING CROWN ad. YANMAR L70 LA178

REGULATOR ad. YANMAR L48/70/100 LA170/178/186

ALTERNATOR ad. YANMAR L48/70/100 LA170/178/186

START MOTOR ad. YANMAR L48/70/100 LA170/178/186

ELECTRIC START KIT ad. YANMAR L70 LA178

MARMIT FOR DRY AIR FILTER ad. YANMAR L48/70 LA170/178

SEGMENT SERIES ad. YANMAR L70 LA178 D=78.50mm

SEGMENT SERIES ad. YANMAR L70 LA178 D=78.25mm

SEGMENT SERIES ad. YANMAR L70 LA178 STD D=78mm

FULL PISTON ad. YANMAR L70 LA178 D=78.50mm

FULL PISTON ad. YANMAR L70 LA178 STD D=78mm

DRY AIR FILTER ELEMENT ad. YANMAR L48/70 LA170/178 ORIG. REF. 114250-12580 D=114mm H=45mm

OIL FILTER ad. YANMAR L48/70/100 LA170/178/186

NAFTA FILTER ad. YANMAR L70 LA178

TANK SUPPORT BRACKET ad. YANMAR L70 LA178

TANK FILTER ad. YANMAR L48/70/100 LA170/178/186

LEFT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

RIGHT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

ANTIVIBRANTE SERBATOIO ad. YANMAR L48/70/100 LA170/178/186

TANK CAP ad. YANMAR L48/70/100 LA170/178/186

TANK TANK WITH CAP AND FILTER TANK FILTER ad. YANMAR L70 LA178

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

PISTONE COMPLETO ad. YANMAR L100 LA186 D=86,25mm

PISTONE COMPLETO ad. YANMAR L70 LA178 D=78,25mm

PISTONE COMPLETO CAMERA DECENTRALE ad. YANMAR L48 LA170 D=70,50mm

PISTONE COMPLETO CAMERA DECENTRALE ad. YANMAR L48 LA170 D=70,25mm

AUTOAVVOLGENTE COMPLETO CON COPPA INNESTO ad. YANMAR L48 LA170

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

COMPLETE DIESEL ENGINE 7 HP WITH TORO STRAP START YANMAR TYPE ENGINES TMYD178 CONICAL 23mm

COMPLETE DIESEL ENGINE 7 HP WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD178 CONICAL 23mm

COMPLETE DIESEL 10 HP ENGINE WITH TORO STRAP START YANMAR TYPE ENGINES TMYD186 CONICAL 23mm

COMPLETE 10 HP DIESEL ENGINE WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD186 CONICAL 23mm

BOTTOM TANK SUPPORT BRACKET ad. YANMAR L48 LA170

INJECTION PUMP ad. YANMAR L100 LA186

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

MOTOR SHAFT OIL SEAL N. T ad. YANMAR L48 LA170 25x42x10

PUNTERIA COVER GASKET ad. YANMAR LA292 BICYLINDER

ENGINE FLANGE ad. YANMAR L48 LA170

MARMIT ad. YANMAR LA292 TWIN CYLINDER

TANK WITH PLUG ad. YANMAR LA292 BICYLINDER

ENGINE FLANGE ad. YANMAR L100 LA186

ENGINE FLANGE ad. YANMAR L70 LA178

MOTOR SHAFT ad. YANMAR LA292 BICYLINDER

OIL VENT PLUG ad. YANMAR LA292 BICYLINDER

TANK CAP ad. YANMAR LA292 BICYLINDER

YANMAR BICYLINDER STEEL CYLINDER LA292

INJECTOR HOLDER COMPLETE POLVERIZER HOLDING ad. YANMAR LA292 BICYLINDER

OIL BATH AIR FILTER WITH 2-HOLE HAT ad. YANMAR L48/70 LA170/178

START SPRING ad. YANMAR L48 LA170

SELF-AVOLVING CUP ad. YANMAR L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L48 LA170

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L70 LA178

BATH OIL BATH AIR FILTER ASPIRATION COLLECTOR ad.YANMAR KAMA VULCAN AND VARIOUS MADE IN CHINA L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L100 LA186

OIL BATH AIR FILTER MARKET ad. YANMAR L100 LA186/188

INJECTION TUBE ad. YANMAR L00 LA186

INJECTION TUBE ad. YANMAR L70 LA178

INJECTION TUBE ad. YANMAR L48 LA170

BALANCE GROUP ad. YANMAR L48 LA170

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L100 LA186

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L48 LA170

BALANCE GROUP ad. YANMAR L100 LA186

BALANCE GROUP ad. YANMAR L70 LA178

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

OIL BATH AIR FILTER WITH HAT ad. YANMAR L100 LA186

OIL BATH AIR FILTER WITH 3-HOLE HAT ad. YANMAR L48/70 LA170/178

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L70 LA178

ENGINE CARTER COVER ad. YANMAR L100 LA186

ENGINE CARTER COVER ad. YANMAR L70 LA178

ENGINE CARTER COVER ad. YANMAR L48 LA170

ENGINE CARTER ad. YANMAR L100 LA186

ENGINE CARTER ad. YANMAR L70 LA178

ENGINE CARTER ad. YANMAR L48 LA170

BRONZINE HEAD ad. YANMAR L100 LA186 0.50mm

BRONZINE HEAD ad. YANMAR L100 LA186 0.25mm

CYLINDER HEAD BRONZE ad. YANMAR L100 LA186 STD

BRONZINE HEAD ad. YANMAR L70 LA178 0.50mm

BRONZINE HEAD ad. YANMAR L70 LA178 0.25mm

BRONZINE BOTTLE HEAD ad. YANMAR L48 LA170 0.50mm

BRONZINE HEAD ad. YANMAR L48 LA170 0.25mm

CYLINDER HEAD BRONZE ad. YANMAR L48 LA170 STD

BANK BRONZE ad. YANMAR L100 LA186 0.50mm

BANK BRONZE ad. YANMAR L100 LA186 0.25mm

BANK BRONZE ad. YANMAR L100 LA186 STD

BANK BRONZE ad. YANMAR L70 LA178 0.50mm

BANK BRONZE ad. YANMAR L70 LA178 0.25mm

BANK BRONZE ad. YANMAR L70 LA178 STD

CYLINDER FOOT BRONZE ad. YANMAR L70 LA178 STD

BANK BRONZE ad. YANMAR L48 LA170 0.50mm

BANK BRONZE ad. YANMAR L48 LA170 0.25mm

BANK BRONZE ad. YANMAR L48 LA170 STD

STEEL CYLINDER ad. YANMAR L100 LA186

STEEL CYLINDER ad. YANMAR L70 LA178

STEEL CYLINDER ad. YANMAR L48 LA170

OIL PUMP ad. YANMAR LA186

POWDER ad. YANMAR V.T. TYPE SHORT L48/70 LA170/178

POWDER ad. YANMAR N.T. TYPE LONG L48/70 LA170/178

POWDER ad. YANMAR V.T. SHORT TYPE L100 LA186

POWDER ad. YANMAR N.T. LONG TYPE L100 LA186

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER SHORT TYPE V.T. L48/70 LA70/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER LONG TYPE N.T. L48/70 LA70/178

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER SHORT TYPE V.T. L100 LA186

FULL INJECTOR HOLDER ad. YANMAR PULVERIZER LONG TYPE N.T. L100 LA186

INJECTION PUMP ad. YANMAR L48/70 LA170/178

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L100 LA186

EXHAUST VALVE ad. YANMAR L70 LA178

ASPIRATION VALVE ad. YANMAR L70 LA178

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L70 LA178

EXHAUST VALVE ad. YANMAR L48 LA170

ASPIRATION VALVE ad. YANMAR L48 LA170

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L48 LA170

START PULLEY ad. YANMAR L100 LA186

START PULLEY ad. YANMAR L70 LA178

START PULLEY ad. YANMAR L48 LA170

PUNTERIE COVER ad. YANMAR L100 LA186

PUNTERIE COVER ad. YANMAR L48/70 LA170/178

MOTOR SHAFT OIL SEAL ad. YANMAR L100 LA186 35x50x8

MOTOR SHAFT OIL SEAL ad. YANMAR L70 LA178 30x45x10

MOTOR SHAFT OIL SEAL ad. YANMAR L48 LA170 30x45x10

CYLINDER HEAD GASKET ad. YANMAR L100 LA186

CYLINDER HEAD GASKET ad. YANMAR L70 LA178

CYLINDER HEAD GASKET ad. YANMAR L48 LA170

COMPLETE GASKET SERIES ad. YANMAR L48 LA170

COMPLETE GASKET SERIES ad. YANMAR L70 LA178

COMPLETE GASKET SERIES ad. YANMAR L100 LA186

START SPRING ad. YANMAR L70/100 LA178/186

SELF-REVOLVING PUSHING ad. YANMAR L48/70/100 LA170/178/186

SELF-AVOLVING CRICKET ad. YANMAR L48/70/100 LA170/178/186

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L100 LA186

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L70 LA178

COMPLETE SELF-AVOLVING + COUPLE ad. YANMAR L48 LA170

STARTING CROWN ad. YANMAR L100 LA186

STARTING CROWN ad. YANMAR L70 LA178

STARTING CROWN ad. YANMAR L48 LA170

REGULATOR ad. YANMAR L48/70/100 LA170/178/186

ALTERNATOR ad. YANMAR L48/70/100 LA170/178/186

START MOTOR ad. YANMAR L48/70/100 LA170/178/186

ELECTRIC START KIT ad. YANMAR L100 LA186

ELECTRIC START KIT ad. YANMAR L70 LA178

ELECTRIC START KIT ad. YANMAR L48 LA170

MARMIT ad. YANMAR L100 LA186

MARMIT FOR DRY AIR FILTER ad. YANMAR L48/70 LA170/178

SEGMENT SERIES ad. YANMAR L48 LA170 D=70.50mm

SEGMENT SERIES ad. YANMAR L48 LA170 D=70.25mm

SEGMENT SERIES ad. YANMAR L48 LA170 STD D=70mm

FULL PISTON ad. YANMAR L48 LA170 STD D=70mm

SEGMENT SERIES ad. YANMAR L70 LA178 D=78.50mm

SEGMENT SERIES ad. YANMAR L70 LA178 D=78.25mm

SEGMENT SERIES ad. YANMAR L70 LA178 STD D=78mm

FULL PISTON ad. YANMAR L70 LA178 D=78.50mm

FULL PISTON ad. YANMAR L70 LA178 STD D=78mm

SEGMENT SERIES ad. YANMAR L100 LA186 D=86.50mm

SEGMENT SERIES ad. YANMAR L100 LA186 D=86.25mm

SEGMENT SERIES ad. YANMAR L100 LA186 STD D=86mm

FULL PISTON ad. YANMAR L100 LA186 STD D=86.50mm

FULL PISTON ad. YANMAR L100 LA186 STD D=86mm

DRY AIR FILTER ELEMENT ad. YANMAR L100 LA186/188 ORIGINAL REF. 114650 - 12540 L=152mm H=71mm

DRY AIR FILTER ELEMENT ad. YANMAR L48/70 LA170/178 ORIG. REF. 114250-12580 D=114mm H=45mm

OIL FILTER ad. YANMAR L48/70/100 LA170/178/186

NAFTA FILTER ad. YANMAR L48 LA170

TANK SUPPORT BRACKET ad. YANMAR L100 LA186

TANK SUPPORT BRACKET ad. YANMAR L70 LA178

TANK SUPPORT BRACKET ad. YANMAR L48 LA170

TANK FILTER ad. YANMAR L48/70/100 LA170/178/186

LEFT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

RIGHT SERBAL TAP ad. YANMAR L48/70/100 LA170/178/186

ANTIVIBRANTE SERBATOIO ad. YANMAR L48/70/100 LA170/178/186

TANK CAP ad. YANMAR L48/70/100 LA170/178/186

TANKSET WITH CAP AND FILTER TANKSET ad. YANMAR L100 LA186/188

TANK TANK WITH CAP AND FILTER TANK FILTER ad. YANMAR L70 LA178

TANK TANK WITH CAP AND FILTER TANK FILTER ad. YANMAR L48 LA170

TESTA CILINDRO COMPLETA DI VALVOLE PER PORTA INIETTORE GAMBO LARGO ad. LOMBARDINI 6LD360/400

FILTRO NAFTA AD AVVITARE TIPO BASSO ad. RUGGERINI RD80/90/901/920 E VARI

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

2-EYE PUMP CONNECTION PIPE HOSE FOR TANK WITH PIPET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

MOTOR SHAFT ad. RUGGERINI RF140 REF. ORIG. 012.10

OIL COUPLE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

INLET VALVE GUIDE ad. LOMBARDINI 15LD315/350 REF. ORIG. 4845.218.196

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 STD

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI 4LD820 LDA820

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER STD D=82mm ORIGINAL REF. 6501.487.197

STARTER MOTOR ad. 6LD325/360/400/435 LDA520/530 LDA450/451/510 3LD450/451/510 RD/RF 80/81/90/91/100/120/121/130/140/148 RD85/850/901/901/2 MC71 EXTRACEE TYPE GREAVES

SMERIGLIO SERIES ad. LOMBARDINI 4LD640 LDA96/97

SMERIGLIO SERIES ad. LOMBARDINI 6LD400/435

EXTENSION FOR MARMIT TYPE LONG VERSION TRACTOR ad. LOMBARDINI LDA450/451/510 3LD450/451/510 LDA100/820/91/96/97 4LD640/705/820 9LD625/2 9LD626/2 SERIES 5LD

INJECTION TUBE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR FILTER WITH INCLUDED PLATE HOOD ad. LOMBARDINI 4LD820 LDA820

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RD80/81 RF80/81 MC70/71 ADN37 REF. ORIG. 2329.0023290000

MOTOR SHAFT ad. LOMBARDINI 11LD25/3

MOTOR SHAFT ad. LOMBARDINI 5LD825/2 5LD832 REF. ORIG. 1050 .190

MOTOR SHAFT ad. RUGGERINI RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD/RF 80/81/90/91 REF. ORIG. 960.56 + 960.55

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR INLET + EXHAUST VALVE KIT ad. ENGINE LOMBARDINI LDA100 820 91 96 97 4LD640 705 820

SEGMENT SERIES ad. LOMBARDINI LDA100 4LD705 2nd ADDITION D=101mm

KIT CYLINDER + PISTON COMPLETE DECENTRAL CHAMBER ad. RUGGERINI RD210 D=90mm

COMPLETE PISTON CYLINDER KIT ad. LOMBARDINI 9LD625/6-2-3 11LD625/6-2-3 DECENTRAL CHAMBER D=95mm

FULL PISTON ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=91mm ORIGINAL REF. A 2154

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/81/90/91/120/140 MC71 0.50

LEFT ROTATION OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

AC PUMP SUPPLY ad. LOMBARDINI LDA450/451/510 3LD450/451/510

POLVERIZER ad. LOMBARDINI 15LD315

CARBURATOR ad. LOMBARDINI LA400/490

DYNAMO ENGINE ad. LOMBARDINI RUGGERINI SERIES 6LD 3LD 4LD RD RF 80/90/120/140 8 TO 18 HP

CONVEYOR KIT WITH ELECTRIC START COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

STARTER MOTOR ad. RUGGERINI MD150

COMPLETE DIESEL ENGINE 7 HP WITH TORO STRAP START YANMAR TYPE ENGINES TMYD178 CONICAL 23mm

COMPLETE DIESEL ENGINE 7 HP WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD178 CONICAL 23mm

COMPLETE DIESEL 10 HP ENGINE WITH TORO STRAP START YANMAR TYPE ENGINES TMYD186 CONICAL 23mm

COMPLETE 10 HP DIESEL ENGINE WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD186 CONICAL 23mm

WHEEL LEVER ad. LOMBARDINI 6LD360/400/435

ORIGINAL BOSCH STARTER MOTOR 0001262031 12V 29619562010 Z=11 D=40mm HOLE INTERAXIS 102mm

DEUTZ STARTING MOTOR 001262002 Z=9 D=34mm HOLE INTERAXIS=91mm

MASSEY FERGUSSON LANDINI PERKINS 2873K405 STARTING ENGINE Z=10 SPROCKET D=39mm HOLE INTERAXIS=88mm

GOLDONI SPROCKET Z=10 TILLER 50 WITH KNOCKER

OIL FILTER ad. LOMBARDINI LDA914 OLD600/2 8LD665/2 8LD740/2

OIL FILTER ad. LOMBARDINI 7LD600/665/740 9LD561/2 9LD625 9LD626/3 11LD625 12LD435/2/2B1 12LD475/2 FOCS LDW 502/903

NAFTA FILTER ad. LOMBARDINI LDA670/2/3/4 LDA830/2/3/4 5LD675/2/3/4 5LD825/2/3/4 11LD625

NAFTA FILTER ad. LOMBARDINI 9LD560/2 10LD560/2

NAFTA FILTER WITH SEALS ad. LOMBARDINI LDA670/672/673 LDA830/832/833/834

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

FIXED ENGINE SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

POLVERIZER ad. LOMBARDINI LDA672/673/674/834 5LD672/2/3 5LD824/2 825/3 930/4 8LD600/2

ORIGINAL LOMBARDINI LA400/490 ELECTRONIC CONTROL UNIT COIL

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=103mm ORIGINAL REF. 6502.072.091

INJECTION PUMP ad. YANMAR L100 LA186

COMPLETE PISTON ad. LOMBARDINI 6LD400 D=86.50mm ORIG. REF. 6500.731.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

KIT SUPPORT + OIL FILTER + PIN LOMBARDINI ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SELF-AVOLVING SPACER ad. LOMBARDINI LDA450/510 3LD510 15LD315

MARMIT ad. ACME VT88 RUGGERINI

PISTON PIN FOR PISTON ad. LOMBARDINI 4LD820

SPINOTTO FOR PISTON ad. LOMBARDINI LDA100/96/97 4LD640

PISTON PIN FOR PISTON ad. LOMBARDINI LDA450/510 3LD510

PISTON PIN FOR PISTON ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

MOTOR SHAFT OIL SEAL N. T ad. YANMAR L48 LA170 25x42x10

FULL PISTON ad. LOMBARDINI LDA78 SECOND MAJOR D=79mm

STARTER MOTOR ad. ENGINE RUGGERINI RD210 211 RD218 270 278

COMPLETE GASKET SERIES ad. LOMBARDINI 5LD930/3

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER STD D=85mm

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD820 REF. ORIG. 8205.083

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER SECOND MAJOR D=83mm

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 5LD930/2/3 DECENTRAL CHAMBER STD D=106mm

TRANSPARENT PREFILTER RING ad. RUGGERINI RD/RF 80/81 MC 71 EXTERNAL DIAMETER 114mm HEIGHT 53mm

SMERIGLIO SERIES ad. LOMBARDINI 15LD400

COMPLETE GASKET SERIES ad. RUGGERINI RD901/2

CYLINDER HEAD SEAL SECOND TAC ad. LOMBARDINI 15LD440

CYLINDER HEAD GASKET FIRST TAC ad. LOMBARDINI 15LD440

Bearing BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510

FULL INJECTOR HOLDER ad. LOMBARDINI 15LD440

FULL INJECTION PUMP ad. LOMBARDINI 15LD400/440

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI 15LD440 STD

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI 15LD440 STD

BIELLA HEAD BRONZE ad. LOMBARDINI 15LD400/440 STD

FULL PISTON ad. LOMBARDINI LDA450 D=86mm

SMERIGLIO SERIES ad. LOMBARDINI 6LD360

FULL PISTON ad. LOMBARDINI LDA914 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6502.067

FULL PISTON ad. RUGGERINI RF140/148 DECENTRALIZED CHAMBER SECOND INCREMENT D=96

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER SECOND MAJOR D=96mm

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER STD D=95mm

SEGMENT SERIES ad. RUGGERINI RD95 D=95mm STD

START ENGINE ad. LOMBARDINI 9LD561/2

TANK KIT COMPLETE WITH FILTER CAP WITH PIPES PLATE AND ACCESSORIES ad. RUGGERINI RF80/90/120/140

BUTTERFLY STRINGS TUBE ad. RUGGERINI RF80/90/120/140 LOMBARDINI

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF140

OIL COUPLE ad. RUGGERINI RF80/90/120/140

OIL COUP SEAL ad. RUGGERINI RF80/90/120/140

PUNTERIA COVER GASKET ad. YANMAR LA292 BICYLINDER

POWER TUBE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF120/140

TANK PUMP CONNECTION PIPE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF80/90

INJECTION PUMP CONNECTION HOSE ad. RUGGERINI RF80/90/120/140

ENGINE FLANGE ad. YANMAR L48 LA170

CONVEYORS + ELECTRIC START KIT COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

MARMIT ad. YANMAR LA292 TWIN CYLINDER

TANK WITH PLUG ad. YANMAR LA292 BICYLINDER

ENGINE FLANGE ad. YANMAR L100 LA186

ENGINE FLANGE ad. YANMAR L70 LA178

MOTOR SHAFT ad. YANMAR LA292 BICYLINDER

CARTER ENGINE CLOSURE PLUG ad. LOMBARDINI RUGGERINI RF80/90/120/140

OIL VENT PLUG ad. YANMAR LA292 BICYLINDER

TANK CAP ad. YANMAR LA292 BICYLINDER

YANMAR BICYLINDER STEEL CYLINDER LA292

CUP FOR RECOIL STARTER TORO MOTORS TMRF80/90/120/140

INJECTOR HOLDER COMPLETE POLVERIZER HOLDING ad. YANMAR LA292 BICYLINDER

OIL BATH AIR FILTER WITH 2-HOLE HAT ad. YANMAR L48/70 LA170/178

RPM REGULATOR LEVERS GROUP ad. RUGGERINI RF80/90/120/140

FULL PISTON ad. LOMBARDINI LDA450 D=85.50mm

ALUMINIUM CYLINDER WASHER ad. LOMBARDINI ENGINE 6LD435 PIN DIAMETER 22mm

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF80/90

TORO MOTORS TMRF80/90/120/140 BLEEDER HOSE

TANK PLATE TORO ENGINES TMRF80/90/120/140

ORIGINAL RUGGERINI RF80 RF90 TANK CAP

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

FULL INJECTOR HOLDER WIDE LEGS ad. LOMBARDINI 6LD360/400

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA520/530

MOTOR SHAFT LONG TYPE ad. LOMBARDINI 4LD820 LDA820

ORIGINAL LOMBARDINI ALUMINIUM CYLINDER 6LD435 SPIN D=22mm

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/LDA510 3LD510

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD440

COMPLETE GASKET SERIES ad. RUGGERINI RD220/901-2 REF. ORIG. A2319

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER D=85.50mm ORIGINAL REF. 2131

FULL PISTON ad. RUGGERINI RD 200/201/208 MD95/180 DECENTRAL CHAMBER D=85.50mm ORIGINAL REF. A 2147

FULL PISTON ad. LOMBARDINI 6LD435 DECENTRAL CHAMBER D=86mm ORIGINAL REF. 6500 811

FULL PISTON ad. LOMBARDINI 6LD435 D=86.50mm ORIGINAL REF. 6501.403

FULL PISTON ad. RUGGERINI RF 90/91 DECENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2154

FULL PISTON ad. RUGGERINI RD 220/901 CENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2408

FULL PISTON ad. RUGGERINI RF 120/RF121 D=90.50mm ORIGINAL REF. A 2405

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER SECOND MAJOR D=96mm ORIGINAL REF. 6500.157

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6500.156

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD400/435

STEEL CYLINDER ad. LOMBARDINI LDA96/97/100 4LD640/4LD820 REF. ORIG. 1526.002

2-GROUND PULLEY STARTER ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9652.019.291

EXHAUST VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9685.031.291

FULL PISTON ad. LOMBARDINI LDA450 D=85mm ORIGINAL REF. 6501.045

COMPLETE GASKET SERIES ad. RUGGERINI RD 210/211/218 REF. ORIG. A2093

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=85.50mm ORIGINAL REF. 6501.074.292

ALTERNATOR ad. LOMBARDINI LDA904/914 8LD665/2 REF. ORIG. 11571580

LOMBARDINI LGA226 LKA226 CAP REF. ORIG. 2942181

SELF-WINDING PLATE 6LD360/400/435 15LD315

INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD220/240/270/278 REF. ORIG. 0096R570

KIT CYLINDER + PISTON COMPLETE CENTRAL CHAMBERad. RUGGERINI RD 220/901 D=90mm ORIG. REF. 00203R0120 00A24R0070

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 6500.734.530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 3LD510 D=85mm ROUND CYLINDER N.T. ORIG. REF. 2380.083.292

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=86mm

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

DIESEL ACCIDENT PREVENTION NAKED LEVER

BRONZE HEAD BRASS ad. RUGGERINI RF 120/130/140 0.25

BRASS BIELLA HEAD ad. RUGGERINI RF 120/130/140 STD

CURRENT REGULATOR 6LD360 LDA510 LDA100 EXTRA CEE TYPE GREAVES

STARTER CROWN 6LD325/360/400/435 LDA520/530 D=257mm d=227mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.036.530

STARTER CROWN LDA450/510 3LD510 D=299mm d=267mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.038.283

BARE CYLINDER HEAD ad. LOMBARDINI LDA520/530

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 15LD315/350

ELECTRIC START KIT ad. LOMBARDINI 15LD315/350

REAR DRIVE SIDE OIL SEAL + FRONT VOLLEY ad. LOMBARDINI 30x50x7 RSX 40x55x7 RDX 15LD400/440 ORIGIN REF. 1213.390.205 1213.396.205

SEGMENT SERIES ad. LOMBARDINI 15LD440 STD D=86mm

BARE CYLINDER HEAD ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

FULL PISTON ad. LOMBARDINI 15LD440 STD D=86mm

COMPLETE TANK KIT WITH PLATE BANDS NAFTA FILTER SUPPORT TUBE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8103.040

ALTERNATOR LDA450/510 4LD640 LDA100 EXTRA CEE TYPE GREAVES

OIL FILTER WITH CARTRIDGE ad. LOMBARDINI 15LD400/440

STEEL CYLINDER ad. LOMBARDINI 15LD400/440 STD REF. ORIG. 1526.264

SMIRROR GASKET SERIES ad. LOMBARDINI LDA100 4LD705

RUBBER VALVE ad.LOMBARDINI 15LD440

CYLINDER HEAD BRONZE ad. LOMBARDINI LDA100 4LD640/705 LDA90/96 LDA670/672/673/674 STD REF. ORIG. 1640.025.262

ORIGINAL LOMBARDINI 25LD POWER REGULATOR REF. ORIG.73623830

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

INJECTION PUMP ad. RUGGERINI RD220 RD270 REF. ORIG. 656.19

INJECTION PUMP ad. RUGGERINI RD180/200/208/210/210 REF. ORIG. 656.48

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4330.023.291

COUPLE WASHERS ad. RUGGERINI SERIES RD/RF 30x47x7 42x56x7 ORIGINAL REF. 2118.0021180000

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 FIRST ADDITION 0.25mm ORIGINAL REF. 1610.087.276

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1610.087.276

ORIGINAL LOMARDINI AIR FILTER SPONGE 15LD225

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 5LD825/2-3-4 LDA832/833/834 DECENTRAL CHAMBER STD D=100mm

OIL PUMP ad. LOMBARDINI 5LD675-2 5LD825-2 LDA834 REF. ORIG. 6605.020

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA100 4LD640/705/820 REF. ORIG. 6410.037.96

CYLINDER BASE GASKET ad. LOMBARDINI 4LD640 LDA96/97

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD640 LDA96/97

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

AC PUMP SUPPLY ad. LOMBARDINI 8LD665 LDA914

AC PUMP SUPPLY ad. LOMBARDINI LDA670/672/673/674

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 DECENTRAL CHAMBER SECOND MAJOR D=83mm ORIGINAL REF. 6500.734.530

CYLINDER HEAD GASKET ad. RUGGERINI RF120 RD901

CYLINDER BASE GASKET ad. LOMBARDINI LDA100 4LD705

CYLINDER HEAD GASKET ad. LOMBARDINI LDA100 4LD705

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

ORIGINAL ALUMINIUM WHITCH ad. LOMBARDINI 15LD225 STD REF. ORIG. 15261960

OIL PUMP ad. RUGGERINI RF 80/90/120/140 REF. ORIG. A2417.00A24R0170

TANK CAP ad. ACME ALN 290/330 REF. ORIG. 898.111

SPRING FOR DISTANCE STOP CONTROL REGULATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

START SPRING ad. YANMAR L48 LA170

SELF-AVOLVING CUP ad. YANMAR L100 LA186

CENTRAL BANK BRONZE ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1640.046

BRONZE BANK CENTRAL ad. LOMBARDINI LDA670/672/673/674 FIRST SURCHARGE 0.25 REF. ORIG. 1640.047

SEGMENT SERIES ad. RUGGERINI RD 270/278/950/952 RF 140/148 STANDARD D=95mm REF ORIG. 8210.049-8210.067

OIL FILTER ad. RUGGERINI RD/RF 80/81/90/120/140/901

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L48 LA170

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L70 LA178

BATH OIL BATH AIR FILTER ASPIRATION COLLECTOR ad.YANMAR KAMA VULCAN AND VARIOUS MADE IN CHINA L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L100 LA186

NAFTA FILTER WITH PLATE 4 HOLES ad. RUGGERINI RD80/81/901/920 REF. ORIG. 91A0120

POLVERIZER LONG TYPE ad. RUGGERINI RD 80/81/901/920/950 RD850/900/920 RD901/A REF. ORIG. 644.26

PUMPER ad. RUGGERINI RD/RF 80/81 RD901/A RD850/900/920/950 RF120/130/140

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

NAFTA FILTER WITH SEAL ad. RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 175.32-21752050

TRANSPARENT PREFILTER RING ad. RUGGERINI D=129X59mm

OIL BATH AIR FILTER MARKET ad. YANMAR L100 LA186/188

TUBE FOR TANK ad. LOMBARDINI LDA450/510 3LD510

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD400

SMERIGLIO SERIES ad. LOMBARDINI LA/LAL 400

FULL INJECTOR HOLDER ad. RUGGERINI RF80/90/120/140

VOLTAGE SIDE CONVEYOR ad. RUGGERINI RF120 RF140

VALVE HEAD LIFT LEVER COMPLETE WITH GASKET ad. RUGGERINI RF80 RF90 RF120 RF140

HEAD LIFT LEVER COMPLETE WITH SPRING AND SCREWS ad. RUGGERINI RF120 RF140

POLVERIZER TYPE SHORT ad. RUGGERINI RF 80/81/90/91/120/140 REF. ORIG. 644.37

COMPLETE BILANCE GROUP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME ADN 37/43 REF. ORIG. 104.34 + 104.35

INJECTION TUBE ad. YANMAR L00 LA186

INJECTION TUBE ad. YANMAR L70 LA178

INJECTION TUBE ad. YANMAR L48 LA170

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 D=95mm ORIG. REF. 4898.007

BRONZINE BIELLA HEAD ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA670

COMPLETE ELECTRIC START KIT ad. RUGGERINI RD/RF 130/140/148 RD85/850/901/901/2 MC71

COMPEL ELECTRIC START KIT ad. RUGGERINI RD/RF 80/81/90/91/100/120/121 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 100/120/121/130/140/148 RD85/850/901/901/2 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 80/81/90/91 MC71

BIELLA FOOT BRONZE ad. LOMBARDINI LDA820

BIELLA FOOT BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

MOTOR SHAFT CAPS ad. 6LD325/360/400 LDA520/530

COMPLETE OIL OIL VENT PLUG ad. RUGGERINI RF80/90/120 ACME REF. ORIG. 00902R0240

GAS TANK BOLT ad. LOMBARDINI 15LD225/315/350

AIR FILTER INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

OIL PRESSURE STOP VALVE ad. LOMBARDINI 15LD315

MOTOR SHAFT KEY ad. LOMBARDINI LDA450/510 3LD510

RUBBER VALVE ad. LOMBARDINI 6LD360/400/435

COMPLETE PISTON + SEGMENT SERIES ad. BETA B 110/117 D= 55.6mm

EXHAUST VALVE GUIDE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 4845.219.196

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

CYLINDER BASE SEAL ad. LOMBARDINI 4LD640 THICKNESS 0.3mm

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

REMOTE STOP CONTROL COVER MOTOP PUMP VERSION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI 15LD315 15LD350

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD325 LDA520

FILTERING MASS GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9685.039.520

INLET VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9652.025.520

FILTERING MASS GASKET ad. LOMBARDINI LDA450/510 3LD510

OIL FILTER SUPPORT GASKET ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

CYLINDER HEAD GASKET ad. LOMBARDINI 6LD360

MOTOR SHAFT KEY ad. LOMBARDINI 6LD 325/360/400/435

REMOTE STOP CONTROL COVER ad. LOMBARDINI LDA 450/LDA 510 LDA 96/97 4LD640 LDA100 4LD705 4LD820

INLET VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.166.500

EXHAUST VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.168.500

BRONZE SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA100 4LD640 LDA820

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 SECOND SURCHARGE 0.50

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 FIRST SURCHARGE 0.25

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25 REF. ORIG. 1610.025.272

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD400

EXHAUST GASKET ad. RUGGERINI RD/RF 80/81 RF90/120

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=79mm

SEMICARTER ad. LOMBARDINI 15LD400 REF. ORIG. 6645.712

OIL DISCHARGE PLUG ad. LOMBARDINI 6LD360/400/435 3LD510

PUMPER ad. RUGGERINI MC70 - 71 RF88 RF 148 ECHOR REF. ORIG. 660.20

MOTOR SHAFT BEARING ad. LOMBARDINI 15LD315

PUMPING ACME ADN37/43 REF. ORIG. 660.101 - 660.012

OIL LEVEL RANGE FOR SEP ad. LOMBARDINI LDA100 4LD640/820

CAMMES SHAFT ad. LOMBARDINI 6LD325/360/400/435

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA 670/672/673

AIR INLET AND EXHAUST VALVE KIT ad. LOMBARDINI LDA 670/672/673

ACME ADN PUMP 48 - 54 - 60W

CARTER ad. LOMBARDINI LDA 450/510

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA 832 5LD 825/2 REF. ORIG. 8180.040 + 8180.068

FULL PISTON ad. LOMBARDINI 4LD640 LDA96/97 CENTRAL CHAMBER SECOND MAJOR D=96mm

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

COMPLETE GASKET SERIES ad. RUGGERINI RD270/278 RD 952 SERIES

BRONZE BIELLA HEAD ad. RUGGERINI RD/RF80 STD

BRONZE BANK SIDE VOLTAGE DISTRIBUTION ad. RUGGERINI RD/RF 80/120 0.25

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/120 STD

ALUMINIUM BLADE ad. LOMBARDINI 15LD350 0.25

ALUMINIUM WHITCH ad. LOMBARDINI 15LD350 STD

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA830/2/3/ 5LD825/2/3/4 D=100mm ORIG. REF. 4898.008

AIR FILTER WITH OIL BATH TRANSPARENT ad. RUGGERINI RF 120/121/140 RD 901/920

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 SECOND MAJOR D=79mm

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 SECOND ADDITION D=86mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 FIRST ADDITION D=102.50mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 SECOND ADDITION D=103mm

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 SECOND ADDITION D=83mm

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 SECOND ADDITION D=96mm

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 FIRST ADDITION D=95.50mm

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.091.272

ORIGINAL LOMBARDINI 15LD225 TANK

ORIGINAL RUGGERINI RF80 RF90 TANK

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER FIRST ADDITION D=95.5mm

FULL PISTON ad. RUGGERINI RF140-148 OFF-CENTER CHAMBER FIRST SURCHARGE D=95.50 REF.ORIG. A21R0080

FULL PISTON ad. LOMBARDINI 9LD625/2 11LD625/2/3 DECENTRAL CHAMBER STD D=95mm

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=87mm

EXHAUST VALVE ad. LOMBARDINI 6LD360/400/435

ASPIRATION VALVE ad. LOMBARDINI 6LD360/400/435

PLASTIC OIL VENT PLUG ad. LOMBARDINI 15LD225/315/350

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/451/510 3LD510 LDA80

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RF90/120/130/140 RD210

KIT VALVES + GUIDES INLET AND OUTLET ad. RUGGERINI RF90/120/130/140 RD210

FULL PISTON ad. LOMBARDINI 15LD315 D=79mm ORIGINAL REF. 6501.252.196

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI CRD 100/951 RP 170/320 CENTRAL CHAMBER D=100mm ORIG. REF. 203.11

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

STEEL CYLINDER ad. RUGGERINI RF80/81/88/90/91 RD 80/81 MC 70/71 REF. ORIG. 100.36-A2546

CLUTCH BELL 4 HOLES DIESEL CONICAL ATTACHMENT D=23mm

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=90mm ORIG. REF. 00203R071000A21R0530

MOTOR SHAFT ad. RUGGERINI RD270/278 RIG. ORIG. 23910023910000

MOTOR SHAFT ad. RUGGERINI RD81 RF80/90 REF. ORIG. 291200A26R0680

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 80/81 DECENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+00A20R0770

GEAR RPM REGULATOR ad. LOMBARDINI 6LD360/400/435

STEEL CYLINDER ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

VALVE ad. LOMBARDINI 6LD325/360/400/435 LDA530

VALVE ad. LOMBARDINI LDA450/510 4LD640 4LD820 LDA96/97/100

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA450 D=85mm ORIG. REF. 2380.074.283

ALUMINIUM BLADDER ad. LOMBARDINI 15LD350 0.50

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

MOTOR SHAFT ad. RUGGERINI TDRF120/140 REF. ORIG. 0021160000

TANK ad. RUGGERINI RF80 RF90

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CAMMES SHAFT ad. RUGGERINI RF80/120 RD80/901

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF80/90 RD80 MC71

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF80/90 RD80

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. RUGGERINI RF120/140 RD901/920

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE GROUP ad. RUGGERINI RF80/90 RD80 MC71 ACME ADN37

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI LDA100/820/640 30x50x10 RSX REF. ORIG. 1213.058.9

CARTRIDGE DRAIN ad. LOMBARDINI 15LD225/315/350 REF. ORIG. 210.58.194

ELECTRIC STARTER FLYWHEEL SIDE GASKET ad. LOMBARDINI 15LD315/350

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 15LD315

ELECTRIC START AIR FILTER COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

MARKET + EXHAUST COLLECTOR ad. LOMBARDINI 15LD315/350

EXHAUST HOSE COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

INJECTION TUBE ad. LOMBARDINI 15LD315/350

AIR FILTER CURVE ad. LOMBARDINI 15LD315/350

PUNTERIE COVER ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 2125.269

SEAL COVER PUNTERIE ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 4400.097

BALANCE GROUP ad. YANMAR L48 LA170

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L100 LA186

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L48 LA170

BALANCE GROUP ad. YANMAR L100 LA186

BALANCE GROUP ad. YANMAR L70 LA178

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

OIL BATH AIR FILTER WITH HAT ad. YANMAR L100 LA186

OIL BATH AIR FILTER WITH 3-HOLE HAT ad. YANMAR L48/70 LA170/178

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 STD REF. ORIG. 1611.185.196

PIPETTA CANDELA ad. LOMBARDINI INTERMOTOR

DISTANCE STOP CONTROL SPRING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP CONTROL LEVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

REMOTE STOP CONTROL COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP COMMAND KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ACCELERATOR CONTROL KIT + DISTANCE STOP COVER ad. LOMBARDINI LDA450/510 3LD510

ADJUSTABLE MOTOR SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

PUNTERIA TUBE GUIDE ad. LOMBARDINI LDA450/510 3LD510

GEAR RPM REGULATOR ad. LOMBARDINI 15LD315/350/225

GEAR RPM REGULATOR ad. LOMBARDINI LDA450/510 3LD510

COMPLETE BILANCER GROUP ad. LOMBARDINI 6LD325/360/400/435 REF. ORIG. 4330.039.540

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA520/530 REF. ORIG. 4330.003.502

KIT ACCESSORIES BILANCE GROUP ad. LOMBARDINI LDA450/510 3L510

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4330.021.28

COMPLETE PRESSURE VALVE KIT ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE GUIDE KIT + EXHAUST VALVE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4845.154.285+4845.156.285

INLET VALVE + EXHAUST VALVE KIT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 9652.017.283+9685.027.283

INLET & EXHAUST VALVE KIT + VALVE GUIDE ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD ad. LOMBARDINI 15LD315 REF. ORIG. 9200.487

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI 6LD435

CYLINDER HEAD COMPLETE WITH VALVES FOR STRAIGHT GAMBO INJECTOR PORT ad. LOMBARDINI 6LD360/400

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP MOUNTED TO. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT MOUNTED to. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CARTER ad. LOMBARDINI 15LD400

ENGINE CARTER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1511.089.283

CARTER ad. LOMBARDINI 6LD360/400 REF. ORIG. 1519.216.520

OIL PUMP ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6605.045

OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6372.075.530

FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.096.530

CONVEYOR KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3790.040.530

ALUMINIUM ENGINE SUPPORT BRACKET ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6360.073.540

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6370.420.540

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.078.530

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6370.326.283

VOLTAGE SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2569.616.283

CONVEYOR KIT ad. LOMBARDINI LDA450/510 3LD510

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3855.097.283

BRACKET SUPPORT ENGINE PLATE ALLUMINIUM ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6371.097.283

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 5066.015.283

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2568

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA450/510 3LD510

FULL FLYWHEEL SIDE DISTRIBUTION CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

SEGMENT SERIES ad. RUGGERINI RF120 RD90/901 D=90mm STD ORIGINAL REF. 2149

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 120/121 D=90mm ORIG. REF. 00203R0120+00A20R0990

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 80 CENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+2336

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 270/278/952 D=95mm ORIG. REF. 00203R0680+0024920000

COMPLETE CYLINDER + PISTON KIT ad. LOMBARDINI LDA914 7LD865 8LD665 D=95mm

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

FLYWHEEL + STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START ROTOR MAGNET ad. LOMBARDINI 15LD315/350/400/440 REF. ORIG. LOMBARDINI 2002.019

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ALTERNATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/75 Z=94 REF. ORIG. 2816.1020

STARTER CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2816.036.530

STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2816.038.283

STARTER CROWN ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 2816.011.270

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

START MOTOR ad. LOMBARDINI BOSCH LDA100 4LD640 LDA820 REF. ORIG. 0.101.109.012-5840.143.272

START MOTOR ad. LOMBARDINI LDA830/832/833 BOSCH

ELECTRIC START KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ELECTRIC START KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START KIT ad. LOMBARDINI LDA100 4LD640 LDA820

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FULL PISTON ad. RUGGERINI RF 120/RF121 D=91mm ORIGIN REF. A2101.00A21R0010

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

BRONZE KIT CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

OIL PUMP ad. LOMBARDINI 9LD560/2 9LD625/2 10LD360/2 10LD400/2 12LD 435/2 12LD475/2

FULL PISTON ad. RUGGERINI RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

FULL PISTON ad. RUGGERINI RD 80/81 MC70/71 D=80.50mm ORIGIN REF. A2078.00A20R0780

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80mm ORIG. REF. A2077.00A20R0770

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm ORIGINAL REF. 1640.084.435

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm ORIGINAL REF. 1640.083.435

BRONZINE BIELLA HEAD ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1640.082.435

BRONZE FOOT WHITE ad. LOMBARDINI LDA450/510 3LD510 0.50mm

BRONZE BELLOW FOOT ad. LOMBARDINI LDA450/510 3LD510 0.25mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1630.007.271

BRONZINE HEAD ad. LOMBARDINI LDA450/510 3LD510 0.50mm ORIGINAL REF. 1640.029.271

BRONZINE HEADS BIELLA ad. LOMBARDINI LDA450/510 3LD510 0.25mm ORIGINAL REF. 1640.028.271

BIELLA HEAD BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 FIRST MINORITY 0.25mm ORIG. REF. 1611.185.196

AIR FILTER WITH FULL OIL BATH HAT ad. RUGGERINI RD/RF 80/81

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.50

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.25

BRONZE KIT CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 STD

BIELLA ad. LOMBARDINI 9LD625/2

ALUMINIUM BLADE ad. LOMBARDINI 15LD315 0.25

ALUMINIUM CYLINDER ad. LOMBARDINI 15LD315 STD

STEEL BLADE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1050.115.500

STEEL BLADE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

FLYWheel SIDE SUPPORT WITH BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 8675.135.500

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8576.097.270

WHEEL SIDE SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8676.098.292

WHEEL SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8675.067.270

TREE A CAMMES ad. LOMBARDINI LDA450/510 3LD510

MOTOR SHAFT ad. LOMBARDINI 9LD625/2

MOTOR SHAFT ad. LOMBARDINI 8LD665/2 LDA914

MOTOR SHAFT ad. LOMBARDINI LDA672

MOTOR SHAFT ad. LOMBARDINI 15LD315/350 REF. ORIG. 1050.8560

MOTOPOMPA VERSION MOTOR SHAFT ad. LOMBARDINI LDA530 6LD360/400

MOTOR SHAFT ad. LOMBARDINI TILLER VERSION 6LD325/360/400 LDA520/530 REF. ORIG. 1050.115.500

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1050.360.292

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1051.013.292

AGRICULTURAL VERSION MOTOR SHAFT SHAFT TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.005.270

PUNTERIE COVER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 2125.103.540

PUNTERIE COVER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2125.193.283

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA450/510 3LD510

PUNTERIE COVER ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.083.272

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.073.272

SEGMENT SERIES ad. LOMBARDINI 15LD350 D= 82.50mm ORIGINAL REF. 8211.240.197

FULL PISTON ad. LOMBARDINI 15LD350 STD D=82mm ORIGINAL REF. 6501.487.197

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=78.50mm ORIG. REF. 8211.228.196

SEGMENT SERIES ad. LOMBARDINI 15LD315 STD D=78mm ORIG. REF. 8211.227.196

FULL PISTON ad. LOMBARDINI 15LD315 D=78.50mm ORIGINAL REF. 6501.251.196

FULL PISTON ad. LOMBARDINI 15LD315 STD D=78mm ORIGINAL REF. 6501.250.196

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 8210.081.520

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 8210.080.520

FULL PISTON ad. LOMBARDINI LDA 520 6LD325 D=79mm

FULL PISTON ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 6502.029.520

FULL PISTON ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 6502.028.520

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD435 D=86mm PIN=22mm ORIGINAL REF. 2380.172.530

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=86.50mm ORIGINAL REF. 8211.017.540

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 STD D=86mm ORIGINAL REF. 8211.056.540

FULL PISTON ad. LOMBARDINI 6LD400 D=86mm STD DECENTRAL CHAMBER

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 8211.046.530

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIG. REF. 8211.045.530

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIGINAL REF. 6500.733.530

FLYWHEEL + STARTING CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD360 D=82mm REF. ORIG. 2380.453.530

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI 6LD360 STD D=82mm ORIG. REF. 2380.453.530

ENGINE CARTER ad. LOMBARDINI 15LD315

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 STD D=85mm ORIGINAL REF. 8210.055.283

FULL PISTON ad. LOMBARDINI LDA510 3LD510 STD D=85mm ORIGINAL REF. 6501.073.292

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 D=85.50mm ORIGINAL REF. 8210.056.283

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 STD D=95 REF. ORIG. 8210.052.276

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI LDA510 STD D=85mm QUADRATED CYLINDER V.T. ORIG. REF. 2380.074.283

KIT CYLINDER + COMPLETE PISTON + SERIES SPINDLE ad. LOMBARDINI 3LD510 STD D=85mm N.T. ROUND CYLINDER REF. ORIG. 2380.083.292

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIG. REF. 6502.070.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=102.50mm ORIGINAL REF. 6502.071.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIGINAL REF. 6502.070.291

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD820 LDA820 D=102mm ORIG. REF. 2380.172.530

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97 D=95.50mm ORIG. REF. 6500.071.272

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA 96/97 STD D=95mm ORIG. REF. 6500.070.272

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD640 LDA96/97 D=95mm ORIG. REF. 2380.4530.530

SEGMENT SERIES ad. LDA100 4LD705 D=100.50mm ORIGINAL REF. 8210.050.279

SEGMENT SERIES ad. LDA100 4LD705 STD D=100mm ORIGINAL REF. 8210.049.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 DECENTRAL CHAMBER FIRST MAJOR D=100.50mm ORIGINAL REF. 6501.022.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 STD D=100mm ORIGINAL REF. 6501.021.279

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA100 4LD705 D=100mm ORIG. REF. 2380.132.540

4-BAND SEGMENT SERIES ad. LOMBARDINI 4LD640/4LD96/4LD97 D=95.50mm ORIGINAL REF. 8210.053.276

ROPE + IMPUGNATION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. PASCHAL LOMBARDINI

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.009.270

MARMIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5462.089.500

MARKET FOR ELECTRIC STARTING LONG NECK TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 5462.090

QUADRED MARKET ad. LOMBARDINI RUGGERINI LDA450/510 3LD510 LDA100/820 4LD640/820 RUGGERINI RF120/140 REF. ORIG. 5460.432

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.025.272

CURVE FOR LONG-TYPE MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

EXTENSION FOR LONG TYPE MARMITAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

SILENCER MARKET LONG TYPE ad. ENGINE LOMBARDINI LDA450 LDA510 3LD510 LDA100 LDA820 4LD640 4LD820 9LD625 2 9LD626 2 SERIES 5LD REF. ORIG. 5461.047

LONG TYPE GASKET KIT + PROLONG + CURVE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD REF. ORIG. 5461.047

PANEL FILTER ELEMENT ad. LOMBARDINI 15LD225 RUGGERINI RY REF. ORIG. 2175180

DRY AIR FILTER ELEMENT ad. LOMBARDINI 15LD315/350

AIR FILTER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=127mm H=123mm

AIR FILTER TANK ad. LOMBARDINI LDA450/510 3LD510 D=155mm H=100mm

AIR FILTER TANK ad. LOMBARDINI LDA100/820 4LD640/820 D=155 H=122

AIR FILTER SPONGE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 5496.110

FILTER MASS WITH SMALL EDGE TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=101mm H=63mm

FILTER MASS WITH EDGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5496.057 D=131mm H=95mm

FILTER MASS WITH EDGE ad. LOMBARDINI LDA100/820 4LD640/820 D=150mm H=107mm

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28X40X7 RSX 15LD225/15LD315/15LD350 REF. ORIG. 1213.345.196

AIR FILTER COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 2125.055.500

AIR FILTER COVER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 2125.056.291

TRANSPARENT PREFILTER NEW TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 1301.069.291

TRANSPARENT PREFILTER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1301.053.500

TRANSPARENT PREFILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 1301.069.291

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

AIR FILTER WITH HAT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.111.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.102.292

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI LDA450/510 3LD510 15LD315/350/500 REF. ORIG. 3700.3730

AIR FILTER WITH HAT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.372.292

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.140.272

AIR FILTER WITH HAT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.139.272

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIG. REF. 1210.092.9

DISCHARGE VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28x38x7 RSX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9

REAR DRIVE SIDE OIL SEAL + FLYWHEEL ad. LOMBARDINI 28x38x7 RSX 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9 1210.092.9

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 40x60x10 RDX LDA450/510 3LD510 ORIGINAL REF. 1210.076.9

REAR DRIVE SIDE OIL SEAL + WHEEL ad. LOMBARDINI 30x47x7 RP 40x60x10 RDX LDA450/510 3LD510 ORIGIN REF. 1213.060.9 1210.076.9

COMPLETE INJECTION PUMP ad. LOMBARDINI 15LD315/350 REF. ORIG. 6590.259.196

AIR INLET VALVE + EXHAUST VALVE KIT ad. YANMAR L100 LA186

SEGMENT SERIES ad. YANMAR L100 LA186 STD D=86mm

KIT BRONZINE TESTA BIELLA BANCO LATO VOLANO E DISTRIBUZIONE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 LDA670/2/3/4 STD

TESTA CILINDRO COMPLETA DI VALVOLE PER PORTA INIETTORE GAMBO LARGO ad. LOMBARDINI 6LD360/400

FILTRO NAFTA AD AVVITARE TIPO BASSO ad. RUGGERINI RD80/90/901/920 E VARI

GOMMA GUARNIZIONE CONVOGLIATORE ad. LOMBARDINI LDA450/510

KIT AVVIAMENTO FACILITATO MANUALE CON PRECARICA A MOLLA ad. YANMAR L48/70/100 LA170/178/186

PISTONE COMPLETO ad. YANMAR L100 LA186 D=86,25mm

PISTONE COMPLETO ad. YANMAR L70 LA178 D=78,25mm

QUADRETTO STARTER AVVIAMENTO LUCI CON SPIE + CABLAGGIO ad. LOMBARDINI RUGGERINI SERIE 6LD 3LD 4LD 15LD RD RF

PISTONE COMPLETO CAMERA DECENTRALE ad. YANMAR L48 LA170 D=70,50mm

CORONA AVVIAMENTO ORIGINALE LOMBARDINI 15LD400

VOLANO ad. LOMBARDINI 15LD315

PISTONE COMPLETO CAMERA DECENTRALE ad. YANMAR L48 LA170 D=70,25mm

AUTOAVVOLGENTE COMPLETO CON COPPA INNESTO ad. YANMAR L48 LA170

CILINDRETTO CHIAVE AVVIAMENTO ELETTRICO CON CABLAGGIO ad. YANMAR L48/70/100 LA170/178/186

DELL'ORTO CARBURATOR SHA 14.12 P MOTOZAPPA VERSION ad. CM 46/80/90 MINARELLI BETA DUCATI

2-EYE PUMP CONNECTION PIPE HOSE FOR TANK WITH PIPET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 AND VARIOUS REF. ORIG. 9571.154.500

MOTOR SHAFT ad. RUGGERINI RF140 REF. ORIG. 012.10

OIL COUPLE ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

INLET VALVE GUIDE ad. LOMBARDINI 15LD315/350 REF. ORIG. 4845.218.196

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 STD

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI 4LD820 LDA820

FULL PISTON ad. LOMBARDINI 15LD350 DECENTRAL CHAMBER STD D=82mm ORIGINAL REF. 6501.487.197

STARTER MOTOR ad. 6LD325/360/400/435 LDA520/530 LDA450/451/510 3LD450/451/510 RD/RF 80/81/90/91/100/120/121/130/140/148 RD85/850/901/901/2 MC71 EXTRACEE TYPE GREAVES

SMERIGLIO SERIES ad. LOMBARDINI 6LD400/435

AIR FILTER WITH INCLUDED PLATE HOOD ad. LOMBARDINI 4LD820 LDA820

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RD80/81 RF80/81 MC70/71 ADN37 REF. ORIG. 2329.0023290000

FULL PISTON ad. MINSEL M100 1st MAJOR D=50.40mm

MOTOR SHAFT ad. LOMBARDINI 11LD25/3

MOTOR SHAFT ad. LOMBARDINI 5LD825/2 5LD832 REF. ORIG. 1050 .190

MOTOR SHAFT ad. RUGGERINI RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD/RF 80/81/90/91 REF. ORIG. 960.56 + 960.55

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR INLET + EXHAUST VALVE KIT ad. ENGINE LOMBARDINI LDA100 820 91 96 97 4LD640 705 820

SEGMENT SERIES ad. LOMBARDINI LDA100 4LD705 2nd ADDITION D=101mm

KIT CYLINDER + PISTON COMPLETE DECENTRAL CHAMBER ad. RUGGERINI RD210 D=90mm

COMPLETE PISTON CYLINDER KIT ad. LOMBARDINI 9LD625/6-2-3 11LD625/6-2-3 DECENTRAL CHAMBER D=95mm

FULL PISTON ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=91mm ORIGINAL REF. A 2154

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/81/90/91/120/140 MC71 0.50

LEFT ROTATION OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

AC PUMP SUPPLY ad. LOMBARDINI LDA450/451/510 3LD450/451/510

POLVERIZER ad. LOMBARDINI 15LD315

CARBURATOR ad. LOMBARDINI LA400/490

CONVEYOR KIT WITH ELECTRIC START COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

MARMIT ad. MINARELLI I90

STARTER MOTOR ad. RUGGERINI MD150

COMPLETE PETROL ENGINE 7 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX210 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH STRAP START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE PETROL ENGINE 9 HP WITH ELECTRIC START TORO ENGINES TYPE HONDA TMGX270 CONICAL 23mm

COMPLETE DIESEL ENGINE 7 HP WITH TORO STRAP START YANMAR TYPE ENGINES TMYD178 CONICAL 23mm

COMPLETE DIESEL ENGINE 7 HP WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD178 CONICAL 23mm

COMPLETE DIESEL 10 HP ENGINE WITH TORO STRAP START YANMAR TYPE ENGINES TMYD186 CONICAL 23mm

COMPLETE 10 HP DIESEL ENGINE WITH ELECTRIC START TORO ENGINES TYPE YANMAR TMYD186 CONICAL 23mm

MARMIT ad. HONDA GX340/390

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX340/390

TANK WITH CAP + FILTER ad. HONDA GX340/390

WHEEL LEVER ad. LOMBARDINI 6LD360/400/435

FLANGE ad. PASBO JLO 101/125/152 MOTORS CM

FILTER MASS FOR AIR FILTERS FBN LDA450/451/510 3LD450/451/510 RUGGERINI D=128X80

ENGINE CARTER ad. LOMBARDINI 15LD350

SEGMENT SERIES ad. RUGGERINI CRD100 D=100.50mm

FULL PISTON ad. ACME A220 D=72.50mm

RPM GEAR ADJUSTMENT ad. HONDA GX160

RPM GEAR ADJUSTMENT ad. HONDA GX240

FULL PISTON ad. LOMBARDINI 15LD400 STD D=82mm

HONDA GXV270 STARTER PULLEY

ORIGINAL LOMBARDINI LDA510 ENGINE MOUNT

LOMBARDINI 15LD400/440 TAPPET SCREW

CONVEYOR GASKET ad. LOMBARDINI MOTOR L=315mm D=5mm

BOTTOM TANK SUPPORT BRACKET ad. YANMAR L48 LA170

POWER TUBE ad. LOMBARDINI AND VARIOUS ENGINES 14mm DIAMETER LENGTH 45.57cm

BARE CYLINDER HEAD WITH VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

ORIGINAL BOSCH STARTER MOTOR 0001262031 12V 29619562010 Z=11 D=40mm HOLE INTERAXIS 102mm

DEUTZ STARTING MOTOR 001262002 Z=9 D=34mm HOLE INTERAXIS=91mm

MASSEY FERGUSSON LANDINI PERKINS 2873K405 STARTING ENGINE Z=10 SPROCKET D=39mm HOLE INTERAXIS=88mm

OIL FILTER ad. LOMBARDINI LDA914 OLD600/2 8LD665/2 8LD740/2

OIL FILTER ad. LOMBARDINI 7LD600/665/740 9LD561/2 9LD625 9LD626/3 11LD625 12LD435/2/2B1 12LD475/2 FOCS LDW 502/903

NAFTA FILTER ad. LOMBARDINI LDA670/2/3/4 LDA830/2/3/4 5LD675/2/3/4 5LD825/2/3/4 11LD625

NAFTA FILTER ad. LOMBARDINI 9LD560/2 10LD560/2

NAFTA FILTER WITH SEALS ad. LOMBARDINI LDA670/672/673 LDA830/832/833/834

LOMBARDINI 6LD325/360/400/435 3LD510 15LD RECOIL PULLEY

AIR FILTER ad. ACME ALN 290

BEARING 30203 17X40X13.25

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. PASCHAL LOMBARDINI

BRACKET FOR AIR FILTER 9 HP ad. ENGINES JLO CM MINSEL MINARELLI BETA ZANETTI MOTOR HOES PASBO BRUMI

FIXED ENGINE SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

FULL PISTON ad. ACME D=72mm

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=103mm ORIGINAL REF. 6502.072.091

COMPLETE PISTON ad. RUGGERINI ACME ADN CENTRAL CHAMBER D=85.50mm

INJECTION PUMP ad. YANMAR L100 LA186

PUNTERIE COVER + OIL CAP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME AND 37/43 REF. ORIG. 233.23

COMPLETE PISTON ad. LOMBARDINI 6LD400 D=86.50mm ORIG. REF. 6500.731.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

KIT SUPPORT + OIL FILTER + PIN LOMBARDINI ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 2175.028.270

SELF-AVOLVING SPACER ad. LOMBARDINI LDA450/510 3LD510 15LD315

PLASTIC AIR FILTER ad. MIXTURE ENGINES 3HP 5

MARMIT ad. MORINI

STARTING PULLEY ad. JLO 152 OLD TYPE FOR STEEL DUNES.

PISTON PIN FOR PISTON ad. LOMBARDINI 4LD820

SPINOTTO FOR PISTON ad. LOMBARDINI LDA100/96/97 4LD640

PISTON PIN FOR PISTON ad. LOMBARDINI LDA450/510 3LD510

PISTON PIN FOR PISTON ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OIL LEVEL CAP ad. YANMAR L48/70/100 LA170/178/186

MOTOR SHAFT OIL SEAL N. T ad. YANMAR L48 LA170 25x42x10

POWER TUBE ad. LOMBARDINI AND VARIOUS MOTORS DIAMETER 13.7mm LENGTH 48cm

FILTER ELEMENT ad. HONDA GX340/390

FILTER ELEMENT ad. HONDA MD-646

FULL PISTON ad. LOMBARDINI LDA78 SECOND MAJOR D=79mm

POWER TUBE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

STARTER MOTOR ad. ENGINE RUGGERINI RD210 211 RD218 270 278

COMPLETE GASKET SERIES ad. LOMBARDINI 5LD930/3

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER STD D=85mm

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD820 REF. ORIG. 8205.083

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 4LD640 LDA96/97 REF. ORIG. 8180.024.272

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 5LD930/2/3 DECENTRAL CHAMBER STD D=106mm

TRANSPARENT PREFILTER RING ad. RUGGERINI RD/RF 80/81 MC 71 EXTERNAL DIAMETER 114mm HEIGHT 53mm

COMPLETE GASKET SERIES ad. INTERMOTOR IM 250/251/2

SMERIGLIO SERIES ad. LOMBARDINI 15LD400

COMPLETE GASKET SERIES ad. RUGGERINI RD901/2

CYLINDER HEAD SEAL SECOND TAC ad. LOMBARDINI 15LD440

CYLINDER HEAD GASKET FIRST TAC ad. LOMBARDINI 15LD440

FILTER MASS FOR HP 9 MIXTURE

MARMIT ad. MINARELLI I 160

Bearing BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510

FULL INJECTOR HOLDER ad. LOMBARDINI 15LD440

FULL INJECTION PUMP ad. LOMBARDINI 15LD400/440

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI 15LD440 STD

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI 15LD440 STD

BIELLA HEAD BRONZE ad. LOMBARDINI 15LD400/440 STD

FULL PISTON ad. LOMBARDINI LDA450 D=86mm

SMERIGLIO SERIES ad. LOMBARDINI 6LD360

CYLINDER HEAD ad. HONDA E MADE IN CHINA GX160

FULL PISTON ad. LOMBARDINI LDA914 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6502.067

FULL PISTON ad. RUGGERINI RD210 DECENTRAL CHAMBER D=90.50mm

FULL PISTON ad. RUGGERINI RF140/148 DECENTRALIZED CHAMBER SECOND INCREMENT D=96

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER SECOND MAJOR D=96mm

FULL PISTON ad. HONDA GX 340/390 STD D=82mm

SEGMENT SERIES ad. INTERMOTOR IM350 D=83mm

SEGMENT SERIES ad. RUGGERINI RD95 D=95mm STD

COMPLETE GASKET SERIES ad. ENGINE INTERMOTOR IM 350 351 352

START ENGINE ad. LOMBARDINI 9LD561/2

TANK KIT COMPLETE WITH FILTER CAP WITH PIPES PLATE AND ACCESSORIES ad. RUGGERINI RF80/90/120/140

BUTTERFLY STRINGS TUBE ad. RUGGERINI RF80/90/120/140 LOMBARDINI

ELECTRONIC CENTRAL COIL ad. B90/110 TECUMSEH

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF140

OIL COUPLE ad. RUGGERINI RF80/90/120/140

OIL COUP SEAL ad. RUGGERINI RF80/90/120/140

PUNTERIA COVER GASKET ad. YANMAR LA292 BICYLINDER

POWER TUBE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF120/140

TANK PUMP CONNECTION PIPE ad. RUGGERINI RF80/90/120/140

PITCH ROD ad. RUGGERINI RF80/90

INJECTION PUMP CONNECTION HOSE ad. RUGGERINI RF80/90/120/140

ENGINE FLANGE ad. YANMAR L48 LA170

CONVEYORS + ELECTRIC START KIT COMPLETE WITH MARMIT VOLTAGE AND ACCESSORIES ad. LOMBARDINI LDA450/510 3LD510

MARMIT ad. YANMAR LA292 TWIN CYLINDER

TANK WITH PLUG ad. YANMAR LA292 BICYLINDER

ENGINE FLANGE ad. YANMAR L70 LA178

MOTOR SHAFT ad. YANMAR LA292 BICYLINDER

OIL VENT PLUG ad. YANMAR LA292 BICYLINDER

TANK CAP ad. YANMAR LA292 BICYLINDER

YANMAR BICYLINDER STEEL CYLINDER LA292

INJECTOR HOLDER COMPLETE POLVERIZER HOLDING ad. YANMAR LA292 BICYLINDER

OIL BATH AIR FILTER WITH 2-HOLE HAT ad. YANMAR L48/70 LA170/178

RPM REGULATOR LEVERS GROUP ad. RUGGERINI RF80/90/120/140

FULL PISTON ad. LOMBARDINI LDA450 D=85.50mm

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF120/140

BANK SUPPORT SIDE DISTRIBUTION ELECTRIC START ad. RUGGERINI RF80/90

TORO MOTORS TMRF80/90/120/140 BLEEDER HOSE

TANK PLATE TORO ENGINES TMRF80/90/120/140

WHEEL SIDE BANK SUPPORT ad. RUGGERINI RF80/90/120/140

MARMIT ad. LOMBARDINI LA400/490 FRT RUGGERINI RD/RF 80/81/90/120/901

ORIGINAL RUGGERINI RF80 RF90 TANK CAP

MARMIT ad. FOXES & BOTTOLS

MARMIT ad. MINSEL ENGINE M100 M160 M165

FLY SIDE CONVEYOR ad. RUGGERINI RF80/90

2T OIL 1 LT PETROL/DIESEL PACK

COMPLETE OIL OUTPUT COVER KIT WITH TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 4LD 7LD AND VARIOUS REF. ORIG. 2145.003.283

BOSCH FULL INJECTION PUMP ad. LOMBARDINI LDA520/530

ALUMINIUM CYLINDER BOTTLE ad. HONDA GX 240/270

MOTOR SHAFT LONG TYPE ad. LOMBARDINI 4LD820 LDA820

ORIGINAL LOMBARDINI ALUMINIUM CYLINDER 6LD435 SPIN D=22mm

ORIGINAL LOMBARDINI LGA225/226/340 ELECTRONIC COIL

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI LDA450/LDA510 3LD510

MOTOR SHAFT WITH GEARS ad. LOMBARDINI 15LD440

COMPLETE GASKET SERIES ad. RUGGERINI RD220/901-2 REF. ORIG. A2319

DELL'ORTO CARBURATOR FHCD 20.16 LOW ALBERIN ad. MINARELLI I125 ZANETTI MORINI REF. ORIG. 7386

CARBURATOR DELL'ORTO SHA 14.14 L ad. ENGINE CM MOTORS REF. ORIG. 1732

DELL'ORTO CARBURATOR FHE 22.19 MOTOZAPPA VERSION ad. MINARELLI I160/190 ZANETTI A175 REF.ORIG. 7520

DELL'ORTO CARBURATOR FHCD 20.16 ad. DUCATI MAPLE REF. ORIG. 7362

FULL PISTON ad. RUGGERINI RF100 RD85/850 ADN48 AD108/110/114-A CENTRAL CHAMBER D=85.50mm ORIGINAL REF. 2131

FULL PISTON ad. RUGGERINI RD 200/201/208 MD95/180 DECENTRAL CHAMBER D=85.50mm ORIGINAL REF. A 2147

FULL PISTON ad. LOMBARDINI 6LD435 DECENTRAL CHAMBER D=86mm ORIGINAL REF. 6500 811

FULL PISTON ad. LOMBARDINI 6LD435 D=86.50mm ORIGINAL REF. 6501.403

FULL PISTON ad. RUGGERINI RF 90/91 DECENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2154

FULL PISTON ad. RUGGERINI RD 220/901 CENTRAL CHAMBER D=90.50mm ORIGINAL REF. A 2408

FULL PISTON ad. RUGGERINI RF 120/RF121 D=90.50mm ORIGINAL REF. A 2405

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER SECOND MAJOR D=96mm ORIGINAL REF. 6500.157

FULL PISTON ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 DECENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6500.156

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD360/400/435

INLET VALVE KIT + EXHAUST + VALVE GUIDE ad. LOMBARDINI 6LD400/435

STEEL CYLINDER ad. LOMBARDINI LDA96/97/100 4LD640/4LD820 REF. ORIG. 1526.002

2-GROUND PULLEY STARTER ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9652.019.291

EXHAUST VALVE ad. LOMBARDINI LDA100 4LD640 4LD820 REF. ORIG. 9685.031.291

FULL PISTON ad. LOMBARDINI LDA450 D=85mm ORIGINAL REF. 6501.045

COMPLETE GASKET SERIES ad. RUGGERINI RD 210/211/218 REF. ORIG. A2093

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

FULL PISTON ad. LOMBARDINI LDA510 3LD510 D=85.50mm ORIGINAL REF. 6501.074.292

ALTERNATOR ad. LOMBARDINI LDA904/914 8LD665/2 REF. ORIG. 11571580

LOMBARDINI LGA226 LKA226 CAP REF. ORIG. 2942181

CYLINDER HEAD GASKET ad. COTIEMME A180/A220

SELF-WINDING PLATE 6LD360/400/435 15LD315

INLET AND EXHAUST VALVE KIT ad. RUGGERINI RD220/240/270/278 REF. ORIG. 0096R570

KIT CYLINDER + PISTON COMPLETE CENTRAL CHAMBERad. RUGGERINI RD 220/901 D=90mm ORIG. REF. 00203R0120 00A24R0070

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 6500.734.530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 3LD510 D=85mm ROUND CYLINDER N.T. ORIG. REF. 2380.083.292

INTERNAL GASKET FOR NAFTA FILTER SUPPORT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

QUADRED MARKET WITH PROTECTION ad. LOMBARDINI RUGGERINI LDA450/451/510 3LD450/451/510 RUGGERINI RF120/121/140 REF. ORIG. 5460.432

DIESEL ACCIDENT PREVENTION NAKED LEVER

BRONZE HEAD BRASS ad. RUGGERINI RF 120/130/140 0.25

BRASS BIELLA HEAD ad. RUGGERINI RF 120/130/140 STD

CURRENT REGULATOR 6LD360 LDA510 LDA100 EXTRA CEE TYPE GREAVES

STARTER CROWN 6LD325/360/400/435 LDA520/530 D=257mm d=227mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.036.530

STARTER CROWN LDA450/510 3LD510 D=299mm d=267mm EXTRA EEC TYPE GREAVES ORIGINAL REF. 2816.038.283

BARE CYLINDER HEAD ad. LOMBARDINI LDA520/530

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 15LD315/350

ELECTRIC START KIT ad. LOMBARDINI 15LD315/350

REAR DRIVE SIDE OIL SEAL + FRONT VOLLEY ad. LOMBARDINI 30x50x7 RSX 40x55x7 RDX 15LD400/440 ORIGIN REF. 1213.390.205 1213.396.205

SEGMENT SERIES ad. LOMBARDINI 15LD440 STD D=86mm

BARE CYLINDER HEAD ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

AIR FILTER CARTRIDGE ad. LOMBARDINI 154LD440

FULL PISTON ad. LOMBARDINI 15LD440 STD D=86mm

COMPLETE TANK KIT WITH PLATE BANDS NAFTA FILTER SUPPORT TUBE AND ACCESSORIES ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 8103.040

ALTERNATOR LDA450/510 4LD640 LDA100 EXTRA CEE TYPE GREAVES

OIL FILTER WITH CARTRIDGE ad. LOMBARDINI 15LD400/440

STEEL CYLINDER ad. LOMBARDINI 15LD400/440 STD REF. ORIG. 1526.264

SMIRROR GASKET SERIES ad. LOMBARDINI LDA100 4LD705

RUBBER VALVE ad.LOMBARDINI 15LD440

CYLINDER HEAD BRONZE ad. LOMBARDINI LDA100 4LD640/705 LDA90/96 LDA670/672/673/674 STD REF. ORIG. 1640.025.262

ORIGINAL LOMBARDINI 25LD POWER REGULATOR REF. ORIG.73623830

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

INJECTION PUMP ad. RUGGERINI RD220 RD270 REF. ORIG. 656.19

INJECTION PUMP ad. RUGGERINI RD180/200/208/210/210 REF. ORIG. 656.48

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 4330.023.291

COUPLE WASHERS ad. RUGGERINI SERIES RD/RF 30x47x7 42x56x7 ORIGINAL REF. 2118.0021180000

COMPLETE GASKET SERIES + SEALS ad. RUGGERINI RF90/91/120/121/130 RD901/920 REF. ORIG. A2140.0021400000

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 15LD350 REF. ORIG. 8180.199.197

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 FIRST ADDITION 0.25mm ORIGINAL REF. 1610.087.276

BRONZE BANK WHEEL SIDE DISTRIBUTION ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1610.087.276

BRONZE BANK SIDE VOLTAGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 1.00mm

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 5LD825/2-3-4 LDA832/833/834 DECENTRAL CHAMBER STD D=100mm

OIL PUMP ad. LOMBARDINI 5LD675-2 5LD825-2 LDA834 REF. ORIG. 6605.020

ORIGINAL LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315 RECOIL STARTER INNER COVER

RUGGERINI ORIGINAL RD/RF 80/81/90/120/140/901 STARTER PULLEY

LOWER PLATE POGGIA VALVE SPRING ad. LOMBARDINI LDA100 4LD640/705/820 REF. ORIG. 6410.037.96

CYLINDER BASE GASKET ad. LOMBARDINI 4LD640 LDA96/97

CYLINDER HEAD GASKET ad. LOMBARDINI 4LD640 LDA96/97

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

SEGMENT SERIES ad. LOMBARDINI LDA914 7LD865 8LD665 FIRST ADDITION D=95.50mm ORIG. REF. 6502.067.720

AC PUMP SUPPLY ad. LOMBARDINI 8LD665 LDA914

AC PUMP SUPPLY ad. LOMBARDINI LDA670/672/673/674

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 DECENTRAL CHAMBER SECOND MAJOR D=83mm ORIGINAL REF. 6500.734.530

CYLINDER HEAD GASKET ad. RUGGERINI RF120 RD901

TANK CAP FOR DECESPUGGER ad. KAWASAKI

CYLINDER HEAD GASKET ad. LOMBARDINI LDA100 4LD705

AIR FILTER COVER ad. RUGGERINI RD/RF 80/81 90/91 RD901

ORIGINAL ALUMINIUM WHITCH ad. LOMBARDINI 15LD225 STD REF. ORIG. 15261960

OIL PUMP ad. RUGGERINI RF 80/90/120/140 REF. ORIG. A2417.00A24R0170

TANK CAP ad. ACME ALN 290/330 REF. ORIG. 898.111

SPRING FOR DISTANCE STOP CONTROL REGULATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

START SPRING ad. YANMAR L48 LA170

SELF-AVOLVING CUP ad. YANMAR L100 LA186

COIL ad. KOHLER CH440 CH395

CENTRAL BANK BRONZE ad. LOMBARDINI LDA670/672/673/674 STD REF. ORIG. 1640.046

BRONZE BANK CENTRAL ad. LOMBARDINI LDA670/672/673/674 FIRST SURCHARGE 0.25 REF. ORIG. 1640.047

SEGMENT SERIES ad. RUGGERINI RD 270/278/950/952 RF 140/148 STANDARD D=95mm REF ORIG. 8210.049-8210.067

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L48 LA170

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L70 LA178

BATH OIL BATH AIR FILTER ASPIRATION COLLECTOR ad.YANMAR KAMA VULCAN AND VARIOUS MADE IN CHINA L100 LA186

INTAKE MANIFOLD FOR DRY AIR FILTER YANMAR KAMA AND VARIOUS MADE IN CHINA L100 LA186

NAFTA FILTER WITH PLATE 4 HOLES ad. RUGGERINI RD80/81/901/920 REF. ORIG. 91A0120

POLVERIZER LONG TYPE ad. RUGGERINI RD 80/81/901/920/950 RD850/900/920 RD901/A REF. ORIG. 644.26

PUMPER ad. RUGGERINI RD/RF 80/81 RD901/A RD850/900/920/950 RF120/130/140

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

NAFTA FILTER WITH SEAL ad. RUGGERINI RF 80/81/90/91/120/121/140 REF. ORIG. 175.32-21752050

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

COMPLETE CARBURATOR ad. HONDA GX 340/370

COMPLETE GASKET SERIES ad. ENGINE JLO L197

TRANSPARENT PREFILTER RING ad. RUGGERINI D=129X59mm

TANK CAP ad. HONDA GX 240/270

COMPLETE PISTON + SEGMENT SERIES ad. BETA B 140/147 D= 59.6mm

FAN ad. HONDA GX160/200

OIL BATH AIR FILTER MARKET ad. YANMAR L100 LA186/188

CARBURATOR BURGEON SPURGE SCREW 1/19 1/23 BING ad. JLO CM 101/125/152/197 MINSEL M100/150/165 MINARELLI

CYLINDER HEAD GASKET ad. ASPERA

TUBE FOR TANK ad. LOMBARDINI LDA450/510 3LD510

COMPLETE PISTON + SEGMENT SERIES ad. MINARELLI I160 D=57mm

ASPERA 25 AND 35 GASKET SERIES

COMPLETE GASKET SERIES ad. LOMBARDINI 15LD400

SMERIGLIO SERIES ad. LOMBARDINI LA/LAL 400

COMPLETE GASKET SERIES ad. MINARELLI I/190

FULL INJECTOR HOLDER ad. RUGGERINI RF80/90/120/140

VOLTAGE SIDE CONVEYOR ad. RUGGERINI RF120 RF140

VALVE HEAD LIFT LEVER COMPLETE WITH GASKET ad. RUGGERINI RF80 RF90 RF120 RF140

HEAD LIFT LEVER COMPLETE WITH SPRING AND SCREWS ad. RUGGERINI RF120 RF140

POLVERIZER TYPE SHORT ad. RUGGERINI RF 80/81/90/91/120/140 REF. ORIG. 644.37

COMPLETE BILANCE GROUP ad. RUGGERINI RD/RF 80/81/90/91 RF120/130/140 RD901 MC71 ACME ADN 37/43 REF. ORIG. 104.34 + 104.35

COMPLETE CARBURATOR ad. HONDA GX 390

ELECTRONIC COIL ad. HONDA GX 340/390

CARBURATOR FOR GENERATOR ad. HONDA GX240

INJECTION TUBE ad. YANMAR L00 LA186

INJECTION TUBE ad. YANMAR L70 LA178

INJECTION TUBE ad. YANMAR L48 LA170

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA670/2/3 5LD675/2/3/4 D=95mm ORIG. REF. 4898.007

BRONZINE BIELLA HEAD ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA670

COMPLETE ELECTRIC START KIT ad. RUGGERINI RD/RF 130/140/148 RD85/850/901/901/2 MC71

COMPEL ELECTRIC START KIT ad. RUGGERINI RD/RF 80/81/90/91/100/120/121 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 100/120/121/130/140/148 RD85/850/901/901/2 MC71

ELECTRIC STARTER MOTOR + CROWN KIT ad. RUGGERINI RD/RF 80/81/90/91 MC71

BIELLA FOOT BRONZE ad. LOMBARDINI LDA820

BIELLA FOOT BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

MOTOR SHAFT CAPS ad. 6LD325/360/400 LDA520/530

COMPLETE OIL OIL VENT PLUG ad. RUGGERINI RF80/90/120 ACME REF. ORIG. 00902R0240

GAS TANK BOLT ad. LOMBARDINI 15LD225/315/350

AIR FILTER INLET GASKET ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

OIL PRESSURE STOP VALVE ad. LOMBARDINI 15LD315

MOTOR SHAFT KEY ad. LOMBARDINI LDA450/510 3LD510

RUBBER VALVE ad. LOMBARDINI 6LD360/400/435

COMPLETE PISTON + SEGMENT SERIES ad. BETA B 110/117 D= 55.6mm

EXHAUST VALVE GUIDE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 4845.219.196

INLET VALVE ad. LOMBARDINI 15LD315 15LD350 REF. ORIG. 9652.130.196

CYLINDER BASE SEAL ad. LOMBARDINI 4LD640 THICKNESS 0.3mm

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 THIRD ADDITION 1mm

REMOTE STOP CONTROL COVER MOTOP PUMP VERSION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI 15LD315 15LD350

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI 6LD325 LDA520

FILTERING MASS GASKET ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

EXHAUST VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9685.039.520

INLET VALVE ad. LOMBARDINI LDA520/530 REF. ORIG. 9652.025.520

FILTERING MASS GASKET ad. LOMBARDINI LDA450/510 3LD510

OIL FILTER SUPPORT GASKET ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

MOTOR SHAFT KEY ad. LOMBARDINI 6LD 325/360/400/435

REMOTE STOP CONTROL COVER ad. LOMBARDINI LDA 450/LDA 510 LDA 96/97 4LD640 LDA100 4LD705 4LD820

EXHAUST VALVE GUIDE ad. LOMBARDINI 6LD360/400/435 LDA520/LDA530 REF. ORIG. 4845.168.500

BRONZE SIDE DISTRIBUTION ad. LOMBARDINI LDA450/510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA100 4LD640 LDA820

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC STARTING MOTOR + CROWN KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

PUNTERIA COVER ad. HONDA GX 120/160/200

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 SECOND SURCHARGE 0.50

BELL HEAD BRONZE ad. LOMBARDINI LDA100 LDA672/LDA673 FIRST SURCHARGE 0.25

GENERATOR TAPS ad. HONDA AND MISCELLANEOUS

MINIMUM JET 110 CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI

MAX JET 45 FOR CARBURATOR 1/23 BING ad. JLO 197 9 HP BETA B 205/210

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25

CUP FOR AUTOAVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 FIRST SURCHARGE 0.25 REF. ORIG. 1610.025.272

CURVE FOR CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI FOR AGRIA.

CYLINDER HEAD GASKET ad. LOMBARDINI 15LD400

EXHAUST GASKET ad. RUGGERINI RD/RF 80/81 RF90/120

MINIMUM JET 45 CARBURATOR 1/19 BING ad. JLO CM 101/125/152 MINSEL M100/150/165 MINARELLI

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=79mm

SEMICARTER ad. LOMBARDINI 15LD400 REF. ORIG. 6645.712

OIL DISCHARGE PLUG ad. LOMBARDINI 6LD360/400/435 3LD510

PUMPER ad. RUGGERINI MC70 - 71 RF88 RF 148 ECHOR REF. ORIG. 660.20

MOTOR SHAFT BEARING ad. LOMBARDINI 15LD315

PUMPING ACME ADN37/43 REF. ORIG. 660.101 - 660.012

OIL LEVEL RANGE FOR SEP ad. LOMBARDINI LDA100 4LD640/820

CAMMES SHAFT ad. LOMBARDINI 6LD325/360/400/435

INLET VALVE + EXHAUST VALVE GUIDE KIT ad. LOMBARDINI LDA 670/672/673

AIR INLET AND EXHAUST VALVE KIT ad. LOMBARDINI LDA 670/672/673

ACME ADN PUMP 48 - 54 - 60W

CARTER ad. LOMBARDINI LDA 450/510

COMPLETE GASKET SERIES + SEALS ad. LOMBARDINI LDA 832 5LD 825/2 REF. ORIG. 8180.040 + 8180.068

COMPLETE GASKET SERIES ad. LOMBARDINI LA LAL400 ENGINE

FULL PISTON ad. LOMBARDINI 4LD640 LDA96/97 CENTRAL CHAMBER SECOND MAJOR D=96mm

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

COMPLETE GASKET SERIES ad. RUGGERINI RD270/278 RD 952 SERIES

BRONZE BIELLA HEAD ad. RUGGERINI RD/RF80 STD

BRONZE BANK SIDE VOLTAGE DISTRIBUTION ad. RUGGERINI RD/RF 80/120 0.25

BRONZE BANK SIDE WHEEL DISTRIBUTION ad. RUGGERINI RD/RF 80/120 STD

ALUMINIUM BLADE ad. LOMBARDINI 15LD350 0.25

ALUMINIUM WHITCH ad. LOMBARDINI 15LD350 STD

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA830/2/3/ 5LD825/2/3/4 D=100mm ORIG. REF. 4898.008

AIR FILTER WITH OIL BATH TRANSPARENT ad. RUGGERINI RF 120/121/140 RD 901/920

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 SECOND MAJOR D=79mm

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 SECOND ADDITION D=86mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 FIRST ADDITION D=102.50mm

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 SECOND ADDITION D=103mm

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 SECOND ADDITION D=83mm

SEGMENT SERIES ad. RUGGERINI RF140/148 RD270/278/950/952 SECOND ADDITION D=96mm

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.091.272

BING CARBURETTOR GASKET 1/19 ad. JLO 101/125/152

BING CARBURETTOR PULLEY 1/19 ad. JLO 101/125/152

CONICAL PIN FOR CARBURATOR BING 1/19 ad. JLO 101/125/152

GAS VALVE SPILL FOR CARBURATOR BING 1/19 ad. JLO 101/125/152

AGITATOR FOR CABURATOR BING 1/19 ad. JLO 101/125/152

ELECTRICAL CENTRAL BOB ad. BETA B90 B110 B140 B150

ELECTRICAL CENTRAL BOB ad. JLO101 JLO125 CM101 CM125

ORIGINAL LOMBARDINI 15LD225 TANK

ORIGINAL RUGGERINI RF80 RF90 TANK

FULL PISTON ad. RUGGERINI RD95/950 CENTRAL CHAMBER FIRST ADDITION D=95.5mm

FULL PISTON ad. RUGGERINI RF140-148 OFF-CENTER CHAMBER FIRST SURCHARGE D=95.50 REF.ORIG. A21R0080

FULL PISTON ad. LOMBARDINI 9LD625/2 11LD625/2/3 DECENTRAL CHAMBER STD D=95mm

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=87mm

BRONZE BANK SIDE FLYWheel ad. LOMBARDINI LDA450/451/510 3LD510 LDA80

MARMIT ad. ZANETTI A 175

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE GUIDE KIT ad. RUGGERINI RF90/120/130/140 RD210

AIR INLET AND EXHAUST VALVE KIT ad. RUGGERINI RF90/120/130/140 RD210

KIT VALVES + GUIDES INLET AND OUTLET ad. RUGGERINI RF90/120/130/140 RD210

FULL PISTON ad. LOMBARDINI 15LD315 D=79mm ORIGINAL REF. 6501.252.196

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI CRD 100/951 RP 170/320 CENTRAL CHAMBER D=100mm ORIG. REF. 203.11

STEEL SCREW ad. RUGGERINI RF 100/120/121/130/140/148 RD85/850/900/901/901-2/920/240/248/270/278/950/952/92-2 AD 108/110/112/114/116 ADN 45/45W/48/48W/50/54W/60/60W

STEEL CYLINDER ad. RUGGERINI RF80/81/88/90/91 RD 80/81 MC 70/71 REF. ORIG. 100.36-A2546

CLUTCH BELL 4 HOLES DIESEL CONICAL ATTACHMENT D=23mm

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF90/91 DECENTRAL CHAMBER D=90mm ORIG. REF. 00203R071000A21R0530

MOTOR SHAFT ad. RUGGERINI RD270/278 RIG. ORIG. 23910023910000

MOTOR SHAFT ad. RUGGERINI RD81 RF80/90 REF. ORIG. 291200A26R0680

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 80/81 DECENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+00A20R0770

GEAR RPM REGULATOR ad. LOMBARDINI 6LD360/400/435

STEEL CYLINDER ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

VALVE ad. LOMBARDINI 6LD325/360/400/435 LDA530

VALVE ad. LOMBARDINI LDA450/510 4LD640 4LD820 LDA96/97/100

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA450 D=85mm ORIG. REF. 2380.074.283

ALUMINIUM BLADDER ad. LOMBARDINI 15LD350 0.50

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 6LD435 STD D=86mm

MOTOR SHAFT ad. RUGGERINI TDRF120/140 REF. ORIG. 0021160000

TANK ad. RUGGERINI RF80 RF90

FLYWheel PROTECTION NETS ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ORIGINAL ELECTRONIC CONTROL UNIT COIL INTERMOTOR IM250/300/350 LGA225/226/340

oil drain plug ad. RUGGERINI RF80/90/120/140 RD901/RD80

OIL LEVEL BAR ad. RUGGERINI RF80/90/120/140 RD80/81/901/920 ACME ADN 37

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF120/140 RD901

INJECTION TUBE ad. RUGGERINI RF80/90 RD80 MC71

PUNTER HOSE + TWO RUBBER RUBBERS ad. RUGGERINI RF80/90 RD80

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. RUGGERINI RF120/140 RD901/920

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE GROUP ad. RUGGERINI RF80/90 RD80 MC71 ACME ADN37

COPPER WASHER FOR PUMP TANK CONNECTION TUBE ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI LDA100/820/640 30x50x10 RSX REF. ORIG. 1213.058.9

ELECTRIC STARTER FLYWHEEL SIDE GASKET ad. LOMBARDINI 15LD315/350

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 15LD315

ELECTRIC START AIR FILTER COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

MARKET + EXHAUST COLLECTOR ad. LOMBARDINI 15LD315/350

EXHAUST HOSE COLLECTOR PROLONG ad. LOMBARDINI 15LD315/350

INJECTION TUBE ad. LOMBARDINI 15LD315/350

AIR FILTER CURVE ad. LOMBARDINI 15LD315/350

PUNTERIE COVER ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 2125.269

SEAL COVER PUNTERIE ad. LOMBARDINI 15LD225/315/350/400/440 REF. ORIG. 4400.097

CARBURATOR DECESPELLER ad. HONDA GX35

BALANCE GROUP ad. YANMAR L48 LA170

CARBURATOR ad. HONDA GX240

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

ELECTRONIC COIL ad. HONDA GX35

EXHAUST VALVE GUIDE ad. HONDA GX160

DISCHARGE VALVE GUIDE ad. HONDA GX240/270

INLET VALVE GUIDE ad. HONDA GX240/270

CARBURATOR DECESPELLER ad. HONDA GX25

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L100 LA186

CONICAL MOTOR SHAFT DIAMETER 23mm MOTOZAPPA VERSION ad. YANMAR KAMA VULCAN ZANETTI AND VARI L48 LA170

AUTOAVOLGENT ad. STIHL 018 E 180

MARMIT ad. HONDA GX 240/270

BALANCE GROUP ad. YANMAR L100 LA186

BALANCE GROUP ad. YANMAR L70 LA178

OIL PUMP ad. YANMAR L48/L70/L100 LA170/LA178/LA186

ELECTRONIC COIL ad. CM 152

COMPLETE GASKET SERIES ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GCV 160

OIL BATH AIR FILTER WITH HAT ad. YANMAR L100 LA186

SELF-AVOLVING ad. STIHL MS230 ED 023

SELF-AVOLVING COMPLETE WITH COUPLE ad. HONDA GX240/270

COMPLETE SELF-AVOLVING ad. HONDA GXV 120/140/160

ELECTRONIC COIL ad. HONDA GXV 160/200

ELECTRONIC COIL ad. HONDA GXV 140

UNIVERSAL 2-WAY PASS-THROUGH OIL FILTER

OIL BATH AIR FILTER WITH 3-HOLE HAT ad. YANMAR L48/70 LA170/178

CAMMES SHAFT ad. HONDA GX340/GX370

CARBURATOR TUBE FITTING BING 1/19 1/23 ad. JLO 101/125/152 197 9 HP

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 STD REF. ORIG. 1611.185.196

PIPETTA CANDELA ad. LOMBARDINI INTERMOTOR

CONDENSER ad. LOMBARDINI INTERMOTOR

CONTACT ad. LOMBARDINI INTERMOTOR

DISTANCE STOP CONTROL SPRING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP CONTROL LEVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

REMOTE STOP CONTROL COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTANCE STOP COMMAND KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ACCELERATOR CONTROL KIT + DISTANCE STOP COVER ad. LOMBARDINI LDA450/510 3LD510

ADJUSTABLE MOTOR SUPPLEMENT CONTROL DEVICE ad. LOMBARDINI LDA450/510 3LD510 LDA100

PUNTERIA TUBE GUIDE ad. LOMBARDINI LDA450/510 3LD510

GEAR RPM REGULATOR ad. LOMBARDINI 15LD315/350/225

GEAR RPM REGULATOR ad. LOMBARDINI LDA450/510 3LD510

COMPLETE BILANCER GROUP ad. LOMBARDINI 6LD325/360/400/435 REF. ORIG. 4330.039.540

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA520/530 REF. ORIG. 4330.003.502

KIT ACCESSORIES BILANCE GROUP ad. LOMBARDINI LDA450/510 3L510

COMPLETE BILANCER GROUP ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4330.021.28

COMPLETE PRESSURE VALVE KIT ad. LOMBARDINI LDA450/510 3LD510

INLET VALVE GUIDE KIT + EXHAUST VALVE ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 4845.154.285+4845.156.285

INLET VALVE + EXHAUST VALVE KIT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 9652.017.283+9685.027.283

INLET & EXHAUST VALVE KIT + VALVE GUIDE ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD ad. LOMBARDINI 15LD315 REF. ORIG. 9200.487

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI 6LD435

CYLINDER HEAD COMPLETE WITH VALVES FOR STRAIGHT GAMBO INJECTOR PORT ad. LOMBARDINI 6LD360/400

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP ad. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BILLET GROUP MOUNTED TO. LOMBARDINI LDA450/510 3LD510

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CYLINDER HEAD COMPLETE WITH VALVES AND BALANCE UNIT MOUNTED to. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

CARTER ad. LOMBARDINI 15LD400

ENGINE CARTER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 1511.089.283

CARTER ad. LOMBARDINI 6LD360/400 REF. ORIG. 1519.216.520

OIL PUMP ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6605.045

OIL PUMP ad. LOMBARDINI LDA450/510 LDA100 4LD640/4LD820 REF. ORIG. 4336.023

WIRING ELECTRIC START KIT ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6372.075.530

FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.096.530

CONVEYOR KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3790.040.530

ALUMINIUM ENGINE SUPPORT BRACKET ELECTRIC START ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6360.073.540

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6370.420.540

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2568.078.530

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6370.326.283

VOLTAGE SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2569.616.283

CONVEYOR KIT ad. LOMBARDINI LDA450/510 3LD510

OVAL ALUMINIUM ENGINE OVAL SPACER ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3855.097.283

BRACKET SUPPORT ENGINE PLATE ALLUMINIUM ELECTRIC START ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 6371.097.283

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 5066.015.283

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2568

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA450/510 3LD510

FULL FLYWHEEL SIDE DISTRIBUTION CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

SEGMENT SERIES ad. RUGGERINI RF120 RD90/901 D=90mm STD ORIGINAL REF. 2149

DISTRIBUTION SIDE ELECTRIC START CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

ELECTRIC START FLYWHEEL SIDE CONVEYOR ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RF 120/121 D=90mm ORIG. REF. 00203R0120+00A20R0990

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 80 CENTRAL CHAMBER D=80mm ORIG. REF. 00203R0190+2336

KIT CYLINDER + PISTON COMPLETE ad. RUGGERINI RD 270/278/952 D=95mm ORIG. REF. 00203R0680+0024920000

COMPLETE CYLINDER + PISTON KIT ad. LOMBARDINI LDA914 7LD865 8LD665 D=95mm

ELECTRIC START CONVEYORS KIT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820

FLYWHEEL + STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START ROTOR MAGNET ad. LOMBARDINI 15LD315/350/400/440 REF. ORIG. LOMBARDINI 2002.019

ORIGINAL LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS CURRENT REGULATOR

CURRENT REGULATOR ad. LOMBARDINI 6LD360 LDA510 LDA100 AND VARIOUS

ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ORIGINAL ALTERNATOR ad. LOMBARDINI RUGGERINI LDA450/510 4LD640 LDA100 RF/RD 80/81/120/140

ALTERNATOR ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

STARTER SWITCH STARTER LIGHT + SPIES ad. LOMBARDINI RUGGERINI 6LD360 LDA510 LDA100 AND VARIOUS

STARTER CROWN ad. LOMBARDINI 15LD315/350 RUGGERINI RY 70/75 Z=94 REF. ORIG. 2816.1020

STARTER CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 2816.036.530

STARTER CROWN ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2816.038.283

STARTER CROWN ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 2816.011.270

START MOTOR ad. LOMBARDINI RUGGERINI BOSCH AND VARIOUS 6LD360 LDA510 RD/RF 80/90/120/901 REF. ORIG. 001-107.024-5840.142.292

START MOTOR ad. LOMBARDINI BOSCH LDA100 4LD640 LDA820 REF. ORIG. 0.101.109.012-5840.143.272

START MOTOR ad. LOMBARDINI LDA830/832/833 BOSCH

ELECTRIC START KIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

ELECTRIC START KIT ad. LOMBARDINI LDA450/510 3LD510

ELECTRIC START KIT ad. LOMBARDINI LDA100 4LD640 LDA820

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FULL PISTON ad. RUGGERINI RF 120/RF121 D=91mm ORIGIN REF. A2101.00A21R0010

KIT BRONZINE CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

BRONZE KIT CYLINDER HEAD + WHEEL SIDE BANK + DISTRIBUTION SIDE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

OIL PUMP ad. LOMBARDINI 9LD560/2 9LD625/2 10LD360/2 10LD400/2 12LD 435/2 12LD475/2

FULL PISTON ad. RUGGERINI RF 80/81 MC70/71 D=80.50mm ORIG. REF. A2078.00A20R0780

FULL PISTON ad. RUGGERINI RD 80/81 MC70/71 D=80.50mm ORIGIN REF. A2078.00A20R0780

SEGMENT SERIES ad. RUGGERINI RD/RF 80/81 MC70/71 D=80mm ORIG. REF. A2077.00A20R0770

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm ORIGINAL REF. 1640.084.435

BRONZINE HEAD WHITE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm ORIGINAL REF. 1640.083.435

BRONZINE BIELLA HEAD ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1640.082.435

BRONZE FOOT WHITE ad. LOMBARDINI LDA450/510 3LD510 0.50mm

BRONZE BELLOW FOOT ad. LOMBARDINI LDA450/510 3LD510 0.25mm

BIELLA FOOT BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1630.007.271

BRONZINE HEAD ad. LOMBARDINI LDA450/510 3LD510 0.50mm ORIGINAL REF. 1640.029.271

BRONZINE HEADS BIELLA ad. LOMBARDINI LDA450/510 3LD510 0.25mm ORIGINAL REF. 1640.028.271

BIELLA HEAD BRONZE ad. LOMBARDINI LDA450/510 3LD510 STD

BRONZE BANK SIDE CENTRAL DISTRIBUTION ad. LOMBARDINI 15LD315/15LD350 FIRST MINORITY 0.25mm ORIG. REF. 1611.185.196

AIR FILTER WITH FULL OIL BATH HAT ad. RUGGERINI RD/RF 80/81

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.50

KIT BRONZINE CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 0.25

BRONZE KIT CYLINDER HEAD + FLYWHEEL SIDE BANK + DISTRIBUTION ad. LOMBARDINI LDA450/510 3LD510 STD

BIELLA ad. LOMBARDINI 9LD625/2

ALUMINIUM BLADE ad. LOMBARDINI 15LD315 0.25

ALUMINIUM CYLINDER ad. LOMBARDINI 15LD315 STD

STEEL BLADE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 1050.115.500

STEEL BLADE ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 1526.003.37

ROLLER BEARING FOR BANK SUPPORT SIDE DISTRIBUTION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.50mm

FLYWheel SIDE BANK SUPPORT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 0.25mm

FLYWheel SIDE SUPPORT WITH BRONZE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 STD REF. ORIG. 8675.135.500

DISTRIBUTION SIDE BANK SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8576.097.270

WHEEL SIDE SUPPORT ad. LOMBARDINI LDA450/510 3LD510 STD REF. ORIG. 8676.098.292

WHEEL SIDE BANK SUPPORT ad. LOMBARDINI LDA100/820/91/96/97 4LD640/705/820 REF. ORIG. 8675.067.270

TREE A CAMMES ad. LOMBARDINI LDA450/510 3LD510

MOTOR SHAFT ad. LOMBARDINI 9LD625/2

MOTOR SHAFT ad. LOMBARDINI 8LD665/2 LDA914

MOTOR SHAFT ad. LOMBARDINI LDA672

MOTOR SHAFT ad. LOMBARDINI 15LD315/350 REF. ORIG. 1050.8560

MOTOPOMPA VERSION MOTOR SHAFT ad. LOMBARDINI LDA530 6LD360/400

MOTOR SHAFT ad. LOMBARDINI TILLER VERSION 6LD325/360/400 LDA520/530 REF. ORIG. 1050.115.500

MOTOR SHAFT INDUSTRIAL VERSION LONG TYPE ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1050.360.292

AGRICULTURAL VERSION SHORT SHAFT MOTOR SHAFT ad. LOMBARDINI LDA510 3LD510 REF. ORIG. 1051.013.292

AGRICULTURAL VERSION MOTOR SHAFT SHAFT TYPE ad. LOMBARDINI LDA100 LDA96/97 4LD640 REF. ORIG. 1050.005.270

MINSEL M100 - M150 - M165 RECOIL STARTER KIT

PUNTERIE COVER ad. LOMBARDINI 6LD360/400/435 REF. ORIG. 2125.103.540

PUNTERIE COVER ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 2125.193.283

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA450/510 3LD510

PUNTERIE COVER ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.083.272

PUNTERIE COVER WITH VALVE LIFT ad. LOMBARDINI LDA100 LDA820 4LD640/820 REF. ORIG. 2175.073.272

SEGMENT SERIES ad. LOMBARDINI 15LD350 D= 82.50mm ORIGINAL REF. 8211.240.197

FULL PISTON ad. LOMBARDINI 15LD350 STD D=82mm ORIGINAL REF. 6501.487.197

SEGMENT SERIES ad. LOMBARDINI 15LD315 D=78.50mm ORIG. REF. 8211.228.196

SEGMENT SERIES ad. LOMBARDINI 15LD315 STD D=78mm ORIG. REF. 8211.227.196

FULL PISTON ad. LOMBARDINI 15LD315 D=78.50mm ORIGINAL REF. 6501.251.196

CONDENSER ad. JLO 101/152

FULL PISTON ad. LOMBARDINI 15LD315 STD D=78mm ORIGINAL REF. 6501.250.196

CONTACT ad. JLO 101/152

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 8210.081.520

4-BAND SEGMENT SERIES ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 8210.080.520

FULL PISTON ad. LOMBARDINI LDA 520 6LD325 D=79mm

FULL PISTON ad. LOMBARDINI LDA520 6LD325 D=78.50mm ORIGINAL REF. 6502.029.520

FULL PISTON ad. LOMBARDINI LDA520 6LD325 STD D=78mm ORIGINAL REF. 6502.028.520

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD435 D=86mm PIN=22mm ORIGINAL REF. 2380.172.530

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 D=86.50mm ORIGINAL REF. 8211.017.540

SEGMENT SERIES ad. LOMBARDINI 6LD400/435 STD D=86mm ORIGINAL REF. 8211.056.540

FULL PISTON ad. LOMBARDINI 6LD400 D=86mm STD DECENTRAL CHAMBER

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 D=82.50mm ORIGINAL REF. 8211.046.530

SEGMENT SERIES ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIG. REF. 8211.045.530

FULL PISTON ad. LOMBARDINI 6LD360 LDA530 STD D=82mm ORIGINAL REF. 6500.733.530

FLYWHEEL + STARTING CROWN ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 6LD360 D=82mm REF. ORIG. 2380.453.530

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI 6LD360 STD D=82mm ORIG. REF. 2380.453.530

ENGINE CARTER ad. LOMBARDINI 15LD315

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 STD D=85mm ORIGINAL REF. 8210.055.283

FULL PISTON ad. LOMBARDINI LDA510 3LD510 STD D=85mm ORIGINAL REF. 6501.073.292

SEGMENT SERIES ad. LOMBARDINI LDA450/510 3LD510 D=85.50mm ORIGINAL REF. 8210.056.283

SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97/670/672/673 5LD625 7LD665 8LD665/2 STD D=95 REF. ORIG. 8210.052.276

KIT CYLINDER + COMPLETE PISTON + SEGMENT SERIES + SPINDLE SERIES ad. LOMBARDINI LDA510 STD D=85mm QUADRATED CYLINDER V.T. ORIG. REF. 2380.074.283

KIT CYLINDER + COMPLETE PISTON + SERIES SPINDLE ad. LOMBARDINI 3LD510 STD D=85mm N.T. ROUND CYLINDER REF. ORIG. 2380.083.292

SEGMENT SERIES ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIG. REF. 6502.070.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 D=102.50mm ORIGINAL REF. 6502.071.291

FULL PISTON ad. LOMBARDINI 4LD820 LDA820 STD D=102mm ORIGINAL REF. 6502.070.291

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD820 LDA820 D=102mm ORIG. REF. 2380.172.530

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA96/97 D=95.50mm ORIG. REF. 6500.071.272

COMPLETE PISTON + SEGMENT SERIES ad. LOMBARDINI 4LD640 LDA 96/97 STD D=95mm ORIG. REF. 6500.070.272

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI 4LD640 LDA96/97 D=95mm ORIG. REF. 2380.4530.530

SEGMENT SERIES ad. LDA100 4LD705 D=100.50mm ORIGINAL REF. 8210.050.279

SEGMENT SERIES ad. LDA100 4LD705 STD D=100mm ORIGINAL REF. 8210.049.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 DECENTRAL CHAMBER FIRST MAJOR D=100.50mm ORIGINAL REF. 6501.022.279

FULL PISTON ad. LOMBARDINI LDA100 4LD705 STD D=100mm ORIGINAL REF. 6501.021.279

KIT CYLINDER + PISTON COMPLETE ad. LOMBARDINI LDA100 4LD705 D=100mm ORIG. REF. 2380.132.540

4-BAND SEGMENT SERIES ad. LOMBARDINI 4LD640/4LD96/4LD97 D=95.50mm ORIGINAL REF. 8210.053.276

ROPE + IMPUGNATION ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

SELF-AVOLVING SPACER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315

COMPLETE SELF-AVOLVING ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 LDA450/510 3LD510 15LD315

MARMIT ad. PASCHAL LOMBARDINI

BRONZE BANK SIDE DISTRIBUTION ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.009.270

MARMIT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5462.089.500

MARKET FOR ELECTRIC STARTING LONG NECK TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820

MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 5462.090

QUADRED MARKET ad. LOMBARDINI RUGGERINI LDA450/510 3LD510 LDA100/820 4LD640/820 RUGGERINI RF120/140 REF. ORIG. 5460.432

FLYWheel SIDE BRONZE ad. LOMBARDINI LDA100 4LD640/4LD705 LDA90/LDA96 STD REF. ORIG. 1610.025.272

CURVE FOR LONG-TYPE MARMIT ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

EXTENSION FOR LONG TYPE MARMITAL ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD

SILENCER MARKET LONG TYPE ad. ENGINE LOMBARDINI LDA450 LDA510 3LD510 LDA100 LDA820 4LD640 4LD820 9LD625 2 9LD626 2 SERIES 5LD REF. ORIG. 5461.047

LONG TYPE GASKET KIT + PROLONG + CURVE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 9LD625/2 9LD626/2 SERIES 5LD REF. ORIG. 5461.047

PANEL FILTER ELEMENT ad. LOMBARDINI 15LD225 RUGGERINI RY REF. ORIG. 2175180

DRY AIR FILTER ELEMENT ad. LOMBARDINI 15LD315/350

AIR FILTER TANK ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=127mm H=123mm

AIR FILTER TANK ad. LOMBARDINI LDA450/510 3LD510 D=155mm H=100mm

AIR FILTER TANK ad. LOMBARDINI LDA100/820 4LD640/820 D=155 H=122

AIR FILTER SPONGE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 5496.110

FILTER MASS WITH SMALL EDGE TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 D=101mm H=63mm

FILTER MASS WITH EDGE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 5496.057 D=131mm H=95mm

FILTER MASS WITH EDGE ad. LOMBARDINI LDA100/820 4LD640/820 D=150mm H=107mm

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28X40X7 RSX 15LD225/15LD315/15LD350 REF. ORIG. 1213.345.196

AIR FILTER COVER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 15LD315/350 REF. ORIG. 2125.055.500

AIR FILTER COVER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 2125.056.291

TRANSPARENT PREFILTER NEW TYPE ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 REF. ORIG. 1301.069.291

TRANSPARENT PREFILTER ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 1301.053.500

TRANSPARENT PREFILTER ad. LOMBARDINI LDA450/510 3LD510 LDA100/820 4LD640/820 7LD 8LD REF. ORIG. 1301.069.291

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.109.540

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI 6LD325/360/400/435 LDA520/530

AIR FILTER WITH HAT ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 3700.111.540

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.102.292

AIR FILTER WITH SMALL HAT TYPE ad. LOMBARDINI LDA450/510 3LD510 15LD315/350/500 REF. ORIG. 3700.3730

AIR FILTER WITH HAT ad. LOMBARDINI LDA450/510 3LD510 REF. ORIG. 3700.372.292

AIR FILTER WITH TRANSPARENT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.140.272

AIR FILTER WITH HAT ad. LOMBARDINI LDA100/91/96/97 4LD640/705 REF. ORIG. 3701.139.272

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIG. REF. 1210.092.9

DISCHARGE VALVE GUIDE ad. LOMBARDINI 4LD640 LDA96/LDA97 4LD705 LDA100 4LD820

REAR DRIVE SIDE OIL SEAL ad. LOMBARDINI 28x38x7 RSX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9

REAR DRIVE SIDE OIL SEAL + FLYWHEEL ad. LOMBARDINI 28x38x7 RSX 38x52x8 RDX 6LD325/360/400/435 LDA520/530 ORIGIN REF. 1213.056.9 1210.092.9

FRONT WHEEL SEAL SIDE ad. LOMBARDINI 40x60x10 RDX LDA450/510 3LD510 ORIGINAL REF. 1210.076.9

REAR DRIVE SIDE OIL SEAL + WHEEL ad. LOMBARDINI 30x47x7 RP 40x60x10 RDX LDA450/510 3LD510 ORIGIN REF. 1213.060.9 1210.076.9

SEALS SERIES ad. COTIEMME CA 200 CA250

COMPLETE INJECTION PUMP ad. LOMBARDINI 15LD315/350 REF. ORIG. 6590.259.196

BIELLA SALICE ad. DUCATI

TANK CAP ad. TECUMSEH/BETA

ELECTRONIC COIL ad. CM 46/80/90

ALUMINIUM BLADE ad. HONDA GX 160/200

SEGMENT SERIES ad. HONDA GX 240/270 STD D=76

SEGMENT SERIES ad. HONDA GX 160/200 STD D=68mm ORIGIN REF. 480.1002

COMPLETE GASKET SET ad. HONDA GX 160/200 REF. ORIG. 180.994

COMPLETE GASKET SERIES ad. HONDA GX 240/270

PUNTERIA COVER ad. HONDA GX 240/270/340

PUNTERIA COVER WITH VALVE LIFT ad. HONDA GX 120/160/200

COMPLETE CARBURATOR ad. HONDA GX 270

COMPLETE CARBURATOR ad. HONDA GX 160 REF. ORIG. 180.373

CARBURATOR ad. HONDA GCV 160

PANEL FILTER ELEMENT ad. HONDA GX 100 GCV 135/160/190

VALVE GUIDE ad. HONDA GX 160/200 GXV 160

EXHAUST VALVE ad. HONDA GX 240/270 REF. ORIG. 14721-ZE2-000

ASPIRATION VALVE ad. HONDA GX 240/270 REF. ORIG. 14711-ZE2-000

EXHAUST VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14721-ZF1-000

ASPIRATION VALVE ad. HONDA GX 160/200 GXV 160 REF. ORIG. 14711-ZF1-000

OIL SENSOR DEVICE ad. HONDA GX 120/160/200/240/270/340/370

ENGINE STOP SWITCH ad. HONDA GX 120/160/200/240/270/340/370

CURRENT DIODE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE PIPE ad. HONDA GX 120/160/200/240/270/340/370

CANDLE ad. HONDA GX 120/160/200/240/270/340/370

ELECTRONIC COIL ad. HONDA GX 240/270

ELECTRONIC COIL ad. HONDA GX 120/160/200 REF. ORIG. 179.981

SELF-AVOLVING SPRING ad. HONDA GX 120/160/200 REF. ORIG. 180.1025

COMPLETE SELF-AVOLVING + COUPLE ad. HONDA GX 160/200

COMPLETE SELF-AVOLVING ad. HONDA GCV135/160

COMPLETE SELF-AVOLVING ad. HONDA GX240/270

DRY AIR FILTER ad. ENGINE HONDA GX 240 270

MARMIT ad. HONDA GX 120/160/200 REF. ORIG. 180.032

COMPLETE DRY AIR FILTER ad. HONDA GX 120/160/200 REF. ORIG. 30.244

OIL LEVEL CAP ad. HONDA GX 120/160/200/240/270/340/370

RUBINETTO ad. HONDA GX 120/160/200/240/270/340/370

PLASTIC TANK CAP ad. HONDA GX 35

PLASTIC TANK CAP ad. HONDA GXV 160

METAL TANK CAP ad. HONDA GX 120/160/200/240/270/340/390 REF. ORIG. 2.824

TANK WITH CAP ad. HONDA GX 160/200 REF. ORIG. 180.035

TANK WITH CAP ad. HONDA GX 240/270

UNIVERSAL ALUMINUM DOUBLE BODY BRUSHCUTTER HEAD

CYLINDER HEAD ad. JLO 125 CM 125 REF. ORIG. 125.07.005.000

NAFTA FILTER ad. EASTER DUCATS

M10 X 1 HORIZONTAL POMBLE TAP ad. CM MOTORS AND VARIOUS

2-WAY PETROLEUM PETROL TAP ad. INTERMOTOR

LEVER TAP M 10 X 1 ad. PASBO BRUMI MECC. BENASSI

ENGINE FLANGE ad. HONDA GX270

SELF-AVOLVING PULLEY STARTING ad. JLO101/125/152 AND CM ENGINES

CONTACT RUTTOR ad. MINARELLI I 125

MARMIT ad. INTERMOTOR IM 300/350

MARMIT ad. MINARELLI I150

MARMIT ad. MINARELLI I125

MARMIT ad. BRUMI JLO L101/125/152 BETA 210

MARMIT ad. PASBO JLO 152 N.T.

COIL ad. OLEOMAC

ORIGINAL ELECTRONIC CONTROL UNIT COIL PVL MINSEL M 100/150/165

EXTERNAL ELECTRONIC CURRENT CURRENT ELECTRONIC POWER BOB ad. MINARELLI DUCATI ZANETTI 175 A165 B120 MINSEL M 100/150/165

EXTERNAL COIL ad. MINARELLI ZANETTI

ELECTRICAL POWER PLUG BOB ad. MINARELLI I50/80/85

ELECTRICAL POWER PLUG BOB ad. MINARELLI I150

COIL ad. MINARELLI I160 ORIGINAL SAPRISA

ELECTRIC COIL ad. JLO 152 ORIGINAL

INTERNAL ELECTRONIC CENTRAL BOOSTING BOOST ad. JLO CM 101/125/152

ELECTRIC COIL WITH PICK UP ad. BETA B 155/175/205/210

FULL PISTON ad. MINSEL M100 D=50mm

FULL PISTON ad. MINARELLI I160 D=57.80mm

FULL PISTON ad. MINARELLI I160 D=57.40mm

FULL PISTON ad. MINARELLI I160 D=57mm

FULL PISTON ad. MINARELLI I150 D=40mm

FULL PISTON ad. BETA B 140/147 D= 58.4mm

FULL PISTON ad. BETA B 140/147 D= 58.8mm

FULL PISTON ad. BETA B 140/147 D= 59.6mm

KIT COMPLETE CYLINDER + PISTON ad. JLO 101 CM D=50mm REF. ORIG. 315.07.002.11

KIT COMPLETE CYLINDER + PISTON ad. JLO CM 152 MINSEL M150 D=61 INTERCHANGEABLE TO D=59mm ORIG. REF. 152.07.801.21

SELF-AVOLVING SPRING ad. JLO 101/125/152

START CRICKET ad. JLO 101/125/152

CONDENSER ad. BETA B140

SPRING FOR CARBURATOR 1/19 BING ad. JLO 101/125/152

EXTERNAL FILTER FOR 2T ENGINES

CARBURATOR INLET COLLECTOR BING 1/19 ad. JLO 101/125/152 H=52

CARBURATOR FHC 20.16 ad. MINARELLI I125 VERS. MOTOZAPPA

CARBURATOR 1/23 BING ad. JLO 197 9 HP

CARBURATOR 1/19 BING ad. JLO 101/125/152

UNIVERSAL FUEL TANK KIT UNIVERSAL MIXTURE ENGINES AND COMPATIBLE MODELS

Gears

milling cutter shaft ad. VALPADANA VMC10 SEP 1300/1700 ES=27mm

MILLER SHAFT ad. SEP 140 MOTOAGRICOLA SEP 138 HEXAGONAL ES=35mm

MILLER BEARING SHAFT ad. BENASSI RL15 L=320mm ES=35mm

CONICAL PAIR + MILLING SHAFT ad. MAG J52 Z=7/23

milling cutter shaft with square ad. MAG 2P

MILLER HOLDING SHAFT ad. F&M R5 ES=27mm

milling cutter shaft ad. BERTOLINI 10 HP

BERTOLINI MILLING CUTTER SHAFT NUT

milling cutter shaft ad. FERRARI 34 FULL EUROSYSTEM ES=27mm

CUTTER SHAFT SHAFT ad. FORT TIGROTTO PERFORATED ES=27 L= 260mm ORIGIN REF. 15-07-403339

milling cutter shaft ad. VALPADANA VMC18

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=250mm

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=235mm

milling cutter shaft ad. VALPADANA VMC150

PRIMARY SHAFT + SCROLL ad. GRILL 13000

milling shaft ad. ADRIATIC MASTERMEC

milling cutter shaft ad. SEP 140 GROOVED

MILLER BEARING SHAFT ad. SEP 140 ES=27

milling cutter shaft ad. SEP 125 ES=27 VMC150

MILLER TREE HOLDER ad. PGS

MILLER BEARING SHAFT ad. IMER ES=27

PRIMARY SHAFT Z=8/8/12/17 ad. CRICKET 11000/11500 REF. ORIG. 21198

PRIMARY SHAFT + SLIDING GEAR ad. CRICKET 11000/11500 Z=8/8/12/17 REF. ORIG. 21198

MILLER BRACKET SHAFT ad. CRICKET 11000 ES=27 REF. ORIG. 11383

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON MAJOR Z=12

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON 22 Z=10/18/20

milling cutter shaft ad. GRYPHON 22 LONG TYPE ES=27

milling cutter shaft ad. GRYPHON 22 SHORT TYPE ES=27

CUTTER SHAFT SHAFT ad. FORT TIGROTTO ES=27 L=300mm ORIG. REF. 15-07-403339

MILLING SHAFT TREE ad. FORT LION ES=35

PRIMARY TREE ad. BARBERS GAZELLE Z=9/9/13/18

PRIMARY SHAFT + DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=9/9/13/18 Z=13/27/31

MILLER SHAFT TREE ad. BARBIERI CONDOR ES=27 REF. ORIG. 01014

milling cutter shaft ad. MAB T4

milling cutter shaft ad. BERTOLINI 12 14 HP

milling cutter shaft ad. BERTOLINI 18 HP

TREE AXLE PORTA FRESA ad. FERRARINE

MILLER SHAFT SHAFT ad. FERRARI 72/73

MILLER SHAFT SHAFT ad. FERRARI 74/75

MILLER BEARING SHAFT ad. PASQUALI 12 HP

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

milling cutter shaft ad. PASQUALI 18 HP

POWER TAKEOFF SHAFT ad. VALPADANA VMC14

milling cutter shaft ad. VALPADANA VMC14

PRIMARY SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=9/15 REF. ORIG. 0004293

GEAR SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=13 REF. ORIG. 0004292

DIFFERENTIAL SHAFT ad. SUPER SPECIAL 140 GOLDONI REF.ORIG. 02466

POWER TAKEOFF SHAFT ad. SUPER SPECIAL GOLDONI

COPPIA CONICA ad. GOLDONI Z=10/29 FRESA 50 CON BATTENTE

ORIGINAL FORT LEON MINITIGRE Z=10/32 L=232mm BEARBACK COUPLING 30mm OUTER CROWN DIAMETER=100mm ORIGINAL REF. 157114101 + 15714045

ORIGINAL BEVEL GEAR PAIR CRICKET 127/131 Z=9/30

CONICAL PAIR ad. BERTOLINI BM 10 10 HP Z=10/27

GOLDONI MILLING PINION 60 Z=12

GOLDONI SPROCKET Z=10 MILLING CUTTER 50 WITHOUT KNOCKER

GOLDONI SPROCKET Z=10 TILLER 50 WITH KNOCKER

SPROCKET ad. GOLDONI MILLING CUTTER 28 Z=11

SPROCKET ad. GOLDONI MILLING CUTTER 25 Z=10

CONICAL PAIR ad. VALPADANA VMC10 10 HP Z=11/25

MILLER SHAFT ad. SEP 140 MOTOAGRICOLA SEP 138 HEXAGONAL ES=35mm

LOWER CONICAL PAIR ad. BENASSI MECHANICAL BL75 Z=7/23

CONICAL PAIR + MILLING SHAFT ad. MAG J52 Z=7/23

PINION ad. SHORT TYPE FORT TIGER Z=7

BEVEL GEAR PAIR + MAG SHAFT J52

CONICAL PAIR ad. MAG Z=7/24

LOWER CONICAL PAIR ad. F&M R5 450 Z= 7/27

LOWER CONICAL PAIR ad. F&M R5 430/440 Z=7/25

GOLDONI BEVEL GEAR PAIR MILLING CUTTER 60 Z=12/41

CONICAL PAIR ad. BERTOLINI 12 HP Z=10/24

LOWER SPROCKET ad. SEP 125 Z=8

LOWER CONICAL PAIR ad. SEP 140 Z=7/26

LOWER CONICAL PAIR ad. SEP 138 V.T. Z=8/29

LOWER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/29

CONICAL PAIR WITH INTEGRAL AXIS ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. ADRIATIC Z=9/22

CONICAL PAIR ad. VALPADANA VMC150 Z=9/24

CONICAL PAIR + INTEGRAL AXIS ad. CARRARINE Z=8/25

LOWER CONICAL PAIR ad. SEP 138 Z=8/25 MOTOAGRICOLA

LOWER SPROCKET ad. BENASSI RL304 Z=8 L=200mm

LOWER CONICAL PAIR WITH KEY + MILLING SHAFT ad. MAG 2P 2PS 85

LOWER CONICAL PAIR ad. PASBO G14 Z=9/32

CONICAL PAIR ad. F&M L300 Z=7/22

CONICAL PAIR ad. AGRIA 1900/3800 Z=10/38

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

CONICAL PAIR ad. SEP 140 Z=7/26

CONICAL PAIR ad. PGS ATTILA SUP. ROMA 38 Z=11/28

CONICAL PAIR ad. MAG J72 Z=8/18

CONICAL PAIR ad. MAG Z=7/26

CONICAL PAIR ad. IMER Z=9/27

CONICAL PAIR ad. GRILLO Z=8/30

CONICAL PAIR ad. GRYPHON 22 Z=7/23

UPPER CONICAL PAIR ad. BRUMI SIMPLEX

CONICAL PAIR ad. BRUMI UNIVERSAL Z=7/22 ES=27

CONICAL PAIR ad. BRUMI FLEA Z=10/18 ES=19

CONICAL PAIR ad. BRUMI SIMPLEX Z=7/23 ES=30

CONICAL PAIR ad. BRUMI REKORD Z=8/26 ES=30

CONICAL PAIR ad. BRUMI MINIREKORD Z=9/30 ES=30

CONICAL PAIR ad. BARBIERI ZEBRA Z=8/27

CONICAL COUPLE UNDERCHIOMA MULETTO ad. BRUMI Z=8/26 ES=32

LOWER CONICAL PAIR ad. BARBIERI GHEPARD Z=7/24 REF. ORIG. 6802502+680250

LOWER CONICAL PAIR ad. BARBIERI CORTINA Z=7/21 REF. ORIG. 1306009-30026

LOWER CONICAL PAIR ad. BARBIERI CONDOR 27 Z=9/27 REF. ORIG. 01011+01012

LOWER CONICAL PAIR ad. BARBIERI CONDOR ES=35 Z=9/27 REF. ORIG. 04062-01011

CONICAL PAIR ad. MAB T4 BONORI Z=8/28

CONICAL PAIR ad. MAB T4 BONORI Z=7/25

CONICAL PAIR ad. BERTOLINI 310S Z=7/19

CONICAL PAIR ad. BERTOLINI 320/330 18 HP Z=9/20

CONICAL PAIR ad. BERTOLINI Z=9/30

CONICAL PAIR ad. FERRARINE Z=9/21

CONICAL PAIR ad. FERRARI 72/73 Z=9/22

CONICAL PAIR ad. FERRARI 74/75 Z=8/26

CONICAL PAIR ad. VALPADANA VMC18 Z=11/34

CONICAL PAIR ad. GOLDONI 28 Z=11/41 REF.ORIG. 40414-40413

CONICAL PAIR ad. PASQUALI 12 HP SQUARE Z=12/22

CONICAL PAIR ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. PASQUALI 598 Z=9/30

CONICAL PAIR ad. VALPADANA VMC14 Z=8/27

CONICAL PAIR ad. VALPADANA VMC14 N.T. Z=9/27

CONICAL PAIR ad. VALPADANA VMC14 Z=9/24

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 FOR CROWN + LONG AXIS Z=33

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22M Z=29 REF. ORIG. 0015146

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 REF. ORIG. 0003254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22M Z=10/29 REF. ORIG. 0015146+0015836

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22 Z=33 REF. ORIG. 3252

LOWER SPROCKET ad. GOLDONI FRESA 22 Z=10 REF. ORIG. 3254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22 Z=10/33 REF. ORIG. 3254+3252

CROWN + LOWER AXLE RIGATO ad. GOLDONI MILLING CUTTER 21M Z=25 REF. ORIG. 15134

LOWER CONICAL PAIR ad. GOLDONI TILLER 21M Z=9/25 REF. ORIG. 21.02679+15134

CROWN + LOWER AXLE SMOOTH ad. GOLDONI MILLING CUTTER 21 Z=25 REF. ORIG. 4899

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 21/21M Z=9 REF. ORIG. 21.02679

LOWER CONICAL PAIR ad. GOLDONI MILLING CUTTER 21 Z=9/25 REF. ORIG. 4899+21.02679

INGRANAGGIO ad. MAB T4 Z=20/26

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

FOLLE GEAR ad. PASBO G14

PRIMARY SHAFT SEP 125

TRIPLE GEAR ad. FERRARI 34 EUROSYSTEM 102 Z=26/23/11

TRIPLE GEAR ad. GOLDONI 719 Z=30/15/19

SLIDING GEAR ad. CRICKET 11000/11500 REF. ORIG. 21201

PRIMARY SHAFT + SLIDING GEAR ad. CRICKET 11000/11500 Z=8/8/12/17 REF. ORIG. 21198

DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=13/27/31

PRIMARY SHAFT + DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=9/9/13/18 Z=13/27/31

TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

FRONT GEAR ad. SUPER SPECIAL GOLDONI Z=10/28 REF. ORIG. 5358

DOUBLE REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=14/30/36 REF. ORIG. 003974

DOUBLE GEAR GOLDONI ad. SUPER SPECIAL GOLDONI Z=12/12 REF.ORIG. 4318

DOUBLE GEAR GEAR GEAR ad. SUPER SPECIAL GOLDONI Z=6/29/35 REF. ORIG. 004289

REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=35 REF. ORIG. 0005359

MANICOTTO FRIZIONE ad. CARRARO DIAMETRO 62.47mm INTERNO 30.11mm

INGRANAGGIO DOPPIO ad. FORT LEONE UNIVERSAL Z=38/43 RIF. ORIG. 15.15.4012/90

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO SCANALATO Z=6

COPPIA CONICA ad. GOLDONI Z=10/29 FRESA 50 CON BATTENTE

PRIMO ALBERO ad. DIESSE Z=15

INGRANAGGIO ad. MAB T4 Z=20/26

INGRANAGGIO DOPPIO ad. GRILLO 9000R Z=22/25

ORIGINAL FORT LEON MINITIGRE Z=10/32 L=232mm BEARBACK COUPLING 30mm OUTER CROWN DIAMETER=100mm ORIGINAL REF. 157114101 + 15714045

ORIGINAL GOLDONI FERRARI VALPADANA MAG FORT BENASSI SYNTERIZED CLUTCH DISC D=110mm

LOWER CROWN ad. BARBERS ZEBRA N.T. Z=30

ORIGINAL CRICKET SHAFT 127

ORIGINAL BEVEL GEAR PAIR CRICKET 127/131 Z=9/30

LOWER SPROCKET ad. FORT LEON UNIVERSAL Z=8 L= 212mm

GEAR SHAFT ad. PGS Z=13/20 TOOTH DIAMETER=41mm TOOTH DIAMETER=60mm

FOLLE GEAR ad. PASBO G14

CONICAL PAIR ad. BERTOLINI BM 10 10 HP Z=10/27

PRIMARY SHAFT ad. GOLDONI 10 HP

RETROMARCY GEAR ad. PGS Z=17/30

GOLDONI MILLING PINION 60 Z=12

GOLDONI SPROCKET Z=10 MILLING CUTTER 50 WITHOUT KNOCKER

GOLDONI SPROCKET Z=10 TILLER 50 WITH KNOCKER

SPROCKET ad. GOLDONI MILLING CUTTER 28 Z=11

SPROCKET ad. GOLDONI MILLING CUTTER 25 Z=10

PRIMARY SHAFT ad. BENASSI RL95 Z=10/10 L=220mm

GEAR GEAR Gearbox ad. PASQUALI SERIES 900 AND SIMILAR MOTOCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=38mm INTERNAL ENGINE 40X51 CONICAL NECK

SLIDING GEAR ad. PASQUALI SERIES 900 Z=14 D=51mm 6 INNER CABLES

DOUBLE GEARGE ad. PASQUALI SERIES 900/945/946 AND SIMILAR MOTORCULTIVATORS AND ISODIAMETRIC SHAFTED TRACTORS Z= 17/17 H=81mm

milling cutter shaft ad. VALPADANA VMC10 SEP 1300/1700 ES=27mm

CONICAL PAIR ad. VALPADANA VMC10 10 HP Z=11/25

MILLER SHAFT ad. SEP 140 MOTOAGRICOLA SEP 138 HEXAGONAL ES=35mm

TRIPLE GEAR ad. F&M R5 Z=45/39/35

DOUBLE GEAR ad. PASQUALI 946 Z= 32/36

LOWER CONICAL PAIR ad. BENASSI MECHANICAL BL75 Z=7/23

DOUBLE SLIDING GEAR ad. PASBO G84 Z=23/28

MILLER BEARING SHAFT ad. BENASSI RL15 L=320mm ES=35mm

CONICAL PAIR + MILLING SHAFT ad. MAG J52 Z=7/23

milling cutter shaft with square ad. MAG 2P

LOWER CONICAL PAIR ad. FORT LION UNIVERSAL Z=8/24

PINION ad. SHORT TYPE FORT TIGER Z=7

MILLER HOLDING SHAFT ad. F&M R5 ES=27mm

BEVEL GEAR PAIR + MAG SHAFT J52

CONICAL PAIR ad. MAG Z=7/24

GEAR ad. GOLDONI UNIVERSAL 224/225/226/230 Z=18/19

DOUBLE GEAR ad. BRUMI SIMPLEX Z=31/36

FIRST TREE ad. PASBO G62 Z=10

RETROMARCY GEAR ad. PASBO G14 Z=15/18/26

SLIDING GEAR ad. PASBO G14 Z=23/28

SLIDING GEAR ad. PASBO 619 Z=38/43

PASBO G73 REVERSE GEAR Z=12/24

UPPER CROWN Z=43 H61 PASBO G73

UPPER CONICAL CROWN ad. PASBO G51 Z=63

LOWER CONICAL PAIR ad. F&M R5 450 Z= 7/27

LOWER CONICAL PAIR ad. F&M R5 430/440 Z=7/25

6203 2RS BEARING

6204 2RS BEARING

GOLDONI BEVEL GEAR PAIR MILLING CUTTER 60 Z=12/41

milling cutter shaft ad. BERTOLINI 10 HP

CONICAL PAIR ad. BERTOLINI 12 HP Z=10/24

PRIMARY SHAFT SEP 125

LOWER SPROCKET ad. SEP 125 Z=8

LOWER CONICAL PAIR ad. SEP 140 Z=7/26

LOWER CONICAL PAIR ad. SEP 138 V.T. Z=8/29

CUTTER SHAFT SHAFT ad. FORT TIGROTTO PERFORATED ES=27 L= 260mm ORIGIN REF. 15-07-403339

CONICAL PAIR WITH INTEGRAL AXIS ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. ADRIATIC Z=9/22

milling cutter shaft ad. VALPADANA VMC18

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=250mm

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=235mm

milling cutter shaft ad. VALPADANA VMC150

CONICAL PAIR ad. VALPADANA VMC150 Z=9/24

CONICAL PAIR + INTEGRAL AXIS ad. CARRARINE Z=8/25

TRIPLE GEAR ad. GOLDONI 719 Z=30/15/19

LOWER CONICAL PAIR ad. SEP 138 Z=8/25 MOTOAGRICOLA

LOWER SPROCKET ad. BENASSI RL304 Z=8 L=200mm

LOWER CONICAL PAIR WITH KEY + MILLING SHAFT ad. MAG 2P 2PS 85

PRIMARY SHAFT + SCROLL ad. GRILL 13000

LOWER CONICAL PAIR ad. PASBO G14 Z=9/32

CONICAL PAIR ad. F&M L300 Z=7/22

milling shaft ad. ADRIATIC MASTERMEC

milling cutter shaft ad. SEP 140 GROOVED

MILLER BEARING SHAFT ad. SEP 140 ES=27

milling cutter shaft ad. SEP 125 ES=27 VMC150

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

CONICAL PAIR ad. SEP 140 Z=7/26

MILLER TREE HOLDER ad. PGS

CONICAL PAIR ad. PGS ATTILA SUP. ROMA 38 Z=11/28

CONICAL PAIR ad. MAG J72 Z=8/18

CONICAL PAIR ad. MAG Z=7/26

MILLER BEARING SHAFT ad. IMER ES=27

CONICAL PAIR ad. IMER Z=9/27

SLIDING GEAR ad. CRICKET 11000/11500 REF. ORIG. 21201

PRIMARY SHAFT Z=8/8/12/17 ad. CRICKET 11000/11500 REF. ORIG. 21198

PRIMARY SHAFT + SLIDING GEAR ad. CRICKET 11000/11500 Z=8/8/12/17 REF. ORIG. 21198

MILLER BRACKET SHAFT ad. CRICKET 11000 ES=27 REF. ORIG. 11383

CONICAL PAIR ad. GRILLO Z=8/30

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON MAJOR Z=12

PRIMARY MILLER BRACKET SHAFT ad. GRYPHON 22 Z=10/18/20

milling cutter shaft ad. GRYPHON 22 LONG TYPE ES=27

milling cutter shaft ad. GRYPHON 22 SHORT TYPE ES=27

CONICAL PAIR ad. GRYPHON 22 Z=7/23

CUTTER SHAFT SHAFT ad. FORT TIGROTTO ES=27 L=300mm ORIG. REF. 15-07-403339

MILLING SHAFT TREE ad. FORT LION ES=35

UPPER CONICAL PAIR ad. BRUMI SIMPLEX

CONICAL PAIR ad. BRUMI UNIVERSAL Z=7/22 ES=27

CONICAL PAIR ad. BRUMI FLEA Z=10/18 ES=19

CONICAL PAIR ad. BRUMI SIMPLEX Z=7/23 ES=30

CONICAL PAIR ad. BRUMI REKORD Z=8/26 ES=30

CONICAL PAIR ad. BRUMI MINIREKORD Z=9/30 ES=30

CONICAL PAIR ad. BARBIERI ZEBRA Z=8/27

CONICAL COUPLE UNDERCHIOMA MULETTO ad. BRUMI Z=8/26 ES=32

LOWER CONICAL PAIR ad. BARBIERI GHEPARD Z=7/24 REF. ORIG. 6802502+680250

DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=13/27/31

PRIMARY TREE ad. BARBERS GAZELLE Z=9/9/13/18

PRIMARY SHAFT + DOUBLE SLIDING GEAR ad. BARBIERI GAZELLE Z=9/9/13/18 Z=13/27/31

MILLER SHAFT TREE ad. BARBIERI CONDOR ES=27 REF. ORIG. 01014

LOWER CONICAL PAIR ad. BARBIERI CORTINA Z=7/21 REF. ORIG. 1306009-30026

LOWER CONICAL PAIR ad. BARBIERI CONDOR 27 Z=9/27 REF. ORIG. 01011+01012

LOWER CONICAL PAIR ad. BARBIERI CONDOR ES=35 Z=9/27 REF. ORIG. 04062-01011

milling cutter shaft ad. MAB T4

CONICAL PAIR ad. MAB T4 BONORI Z=8/28

CONICAL PAIR ad. MAB T4 BONORI Z=7/25

milling cutter shaft ad. BERTOLINI 12 14 HP

milling cutter shaft ad. BERTOLINI 18 HP

CONICAL PAIR ad. BERTOLINI 310S Z=7/19

CONICAL PAIR ad. BERTOLINI 320/330 18 HP Z=9/20

CONICAL PAIR ad. BERTOLINI Z=9/30

TREE AXLE PORTA FRESA ad. FERRARINE

CONICAL PAIR ad. FERRARINE Z=9/21

MILLER SHAFT SHAFT ad. FERRARI 72/73

CONICAL PAIR ad. FERRARI 72/73 Z=9/22

MILLER SHAFT SHAFT ad. FERRARI 74/75

CONICAL PAIR ad. FERRARI 74/75 Z=8/26

MILLER BEARING SHAFT ad. PASQUALI 12 HP

CONICAL PAIR ad. VALPADANA VMC18 Z=11/34

CONICAL PAIR ad. GOLDONI 28 Z=11/41 REF.ORIG. 40414-40413

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

CONICAL PAIR ad. PASQUALI 12 HP SQUARE Z=12/22

milling cutter shaft ad. PASQUALI 18 HP

CONICAL PAIR ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. PASQUALI 598 Z=9/30

POWER TAKEOFF SHAFT ad. VALPADANA VMC14

milling cutter shaft ad. VALPADANA VMC14

CONICAL PAIR ad. VALPADANA VMC14 Z=8/27

CONICAL PAIR ad. VALPADANA VMC14 N.T. Z=9/27

CONICAL PAIR ad. VALPADANA VMC14 Z=9/24

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 FOR CROWN + LONG AXIS Z=33

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22M Z=29 REF. ORIG. 0015146

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 REF. ORIG. 0003254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22M Z=10/29 REF. ORIG. 0015146+0015836

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22 Z=33 REF. ORIG. 3252

LOWER SPROCKET ad. GOLDONI FRESA 22 Z=10 REF. ORIG. 3254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22 Z=10/33 REF. ORIG. 3254+3252

CROWN + LOWER AXLE RIGATO ad. GOLDONI MILLING CUTTER 21M Z=25 REF. ORIG. 15134

LOWER CONICAL PAIR ad. GOLDONI TILLER 21M Z=9/25 REF. ORIG. 21.02679+15134

CROWN + LOWER AXLE SMOOTH ad. GOLDONI MILLING CUTTER 21 Z=25 REF. ORIG. 4899

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 21/21M Z=9 REF. ORIG. 21.02679

LOWER CONICAL PAIR ad. GOLDONI MILLING CUTTER 21 Z=9/25 REF. ORIG. 4899+21.02679

PRIMARY SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=9/15 REF. ORIG. 0004293

GEAR SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=13 REF. ORIG. 0004292

DIFFERENTIAL SHAFT ad. SUPER SPECIAL 140 GOLDONI REF.ORIG. 02466

POWER TAKEOFF SHAFT ad. SUPER SPECIAL GOLDONI

TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

FRONT GEAR ad. SUPER SPECIAL GOLDONI Z=10/28 REF. ORIG. 5358

DOUBLE REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=14/30/36 REF. ORIG. 003974

DOUBLE GEAR GOLDONI ad. SUPER SPECIAL GOLDONI Z=12/12 REF.ORIG. 4318

DOUBLE GEAR GEAR GEAR ad. SUPER SPECIAL GOLDONI Z=6/29/35 REF. ORIG. 004289

REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=35 REF. ORIG. 0005359

GUARNITAL FLEXOID 0,8mm 4 PEZZI

LEVER REF. ORIG. 057/17388

AUTO STOP CONTROL LEVER REF. ORIG. 057/9999

BEARING 7208 ad. GOLDONI SUPER SPECIAL TILLER 22/22M

PRIMARY SHAFT ad. CRICKET 9000R Z=9

MOTORSTOP SAFETY DEVICE DIESEL SAFETY DEVICE D=21mm

FLYWheel SIDE BRONZE ad. ACME ADX 300/370 STD REF. ORIG. 310.105

AUTOAVOLGENT ad. KOHLER CH440

OIL SEAL 75x55x10 RP

BEARING 6302 2RS 15x42x13

HUB II ELEMENT WITHOUT BATTLE ad. F&M R5 ES=27

OIL SEAL 20x52x7 RP

BEARING 32009 45X75X20

HEADLINER D=6mm

HEADLINER D=4.5mm

HEADLINER D=8mm

ASSOLCATOR MINOR

OIL SEAL 20x50x8 RP

CLUTCH DISC D=216mm Z=10 (26x21mm)

BOCCOLA Z=20 D=60mm H=80mm (45X40)

INTERIOR/ESTERIOR SLOTTED BUSH 32X25 D=42mm H=60mm

SPARK PLUG TILLER

BRUSH CUTTER SPARK PLUG

ROLLER BELT A40

PULLEY STARTING ad. CM

STARTING PULLEY WITH HOOKS ad. LOMBARDINI 6LD325/360/400/435 LDA520/530 REF. ORIG. 6960.069

BEARING CAP (30X42)

SEEGER FOR MULTIDISC CLUTCHES (88X80)

TANK DOWEL TORO MOTORS TMRF80/90/120/140

CEMENTED BUSHING ES=36

HEXAGONAL TUBE D=40mm d=30mm L=1MT

FLAT DOWEL TANK TORO MOTORS TMRF80/90/120/140

KIT SLEEVE + BEARING + SPRING BEARING ORIGINAL GOLDONI SPECIAL 140

DIFFERENTIAL OIL SAE 140 1LT PACK

HEXAGONAL TUBE D=44mm D=35mm L=1MT

HEXAGONAL TUBE D=44mm D=36mm L=1MT

HEXAGONAL ROUND TUBE D=42mm D=27mm L=1MT

HEXAGONAL TUBE D=35mm D=27mm L=1MT

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC PLASTIC GASoline D=22mm

MOTORSTOP SAFETY DEVICE ANTIFORTUNISTIC PLASTIC GASoline WITH KNOB AND WIRING D=21mm

MILLED BARREL FOR CLUTCH LEVER

THREADLOCKER 10ML

SMERIGLIO GASKET SERIES ad. TGS VM1051SU

TOROMOTOR RECOIL STARTER TMRF80/90/120/140 YANMAR L100 LA186

TOROMOTOR PULLEY TMRF80/90/120/140

TANK TOROMOTORS TMRF80/90

BEARING RAX 725

BEARING RAX 745

MOTORSTOP SAFETY DEVICE DIESEL SAFETY DEVICE D=23mm

FULL PISTON ad. LOMBARDINI 4LD640 LDA96/97 CENTRAL CHAMBER FIRST MAJOR D=95.50mm ORIGINAL REF. 6500.071.272

BEARING ATN9 12X32X14

DNKI 25/20 DNK 29/20 BEARING

HK 30-20 BEARING

BEARING 3205 25x55x20.6

UNIVERSAL OIL SEAL 45x58x7 RP

AX AXK 40/60 COMBINATION BEARING

CLUTCH SEAL d=7x50m

UNIVERSAL OIL SEAL ad. BRUMI SIMPLEX 35x55x10 RP

GAS WIRE D=1.2x200 FOR DIESEL 10 PIECES PACKAGE.

MOTORWHEEL CARBURATOR ad. STIHL MS210

MOTORWHEEL CARBURATOR ad. STIHL MS170

3 CYLINDER MOTOR SHAFT ad. DEUTZ F3L912D

BICYLINDER MOTOR SHAFT ad. DEUTZ F2L912D

COMPLETE GASKET SERIES ad. ZANETTI A175

COMPLETE GASKET SERIES ad. INTERMOTOR IM300/301/302

COMPLETE GASKET SERIES ad. JLO L197

COMPLETE GASKET SERIES ad. JLO 151/152 CM151/152

COMPLETE GASKET SERIES ad. JLO L125 CM125

COMPLETE GASKET SERIES ad. JLO L101 CM101

COMPLETE GASKET SERIES ad. CM90

COMPLETE GASKET SERIES ad. BETA B210/205

COMPLETE GASKET SERIES ad. BETA B110/125

TANK FOR BRUSH CUTTERS MADE IN CHINA AND VARIOUS

UNIVERSAL THROUGH TAP FOR BRUSH CUTTERS AND VARIOUS 1-WAY

UNIVERSAL THROUGH TAP FOR BRUSHCUTTERS AND VARIOUS 2-WAY

COMPLETE PROMMER FOR BRUSHCUTTERS AND VARIOUS

LEVER TAP M 10 X 1 ad. PASBO BRUMI MECC. BENASSI

MARMIT ad. INTERMOTOR IM 300/350

MARMIT ad. MINARELLI I150

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

Motorcultivators

DISCO FRIZIONE ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

COPPIA CONICA CON ASSE MILLERIGHE INTEGRALE ad. PASQUALI 598 Z=9/26 ALLOGGIO ALBERO CENTRALE CUSCINETTO D=45mm

ALBERO PORTA FRESA LISCIO ad. PASQUALI Z=8

SPROCKET ad. PASQUALI 917 12 HP SQUARE Z=12 FOR CROWN Z=22

PINION ad. EASTER 598 Z=9 FOR CROWN Z=26

SPROCKET ad. EASTER 598 Z=9 FOR CROWN Z=30

milling cutter shaft ad. PASQUALI GROOVED

REAR DRIVE GEAR ad. PASQUALI SERIES 900 AND SIMILAR MOTOCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=39 D=123mm H=10mm INTERNAL ENGINE 40X51 CONICAL NECK

GEAR GEAR Gearbox ad. PASQUALI SERIES 900 AND SIMILAR MOTOCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=38mm INTERNAL ENGINE 40X51 CONICAL NECK

REAR DRIVE GEAR ad. PASQUALI SERIES 900 MOTORCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=38mm INDEX ENGINE 40X51 RIGHT NECK

REAR DRIVE GEAR ad. PASQUALI SERIES 900 MOTORCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=43mm INSIDE ENGINE 40X51

SLIDING GEAR ad. PASQUALI SERIES 900 Z=14 D=51mm 6 INNER CABLES

DOUBLE GEARGE ad. PASQUALI SERIES 900/945/946 AND SIMILAR MOTORCULTIVATORS AND ISODIAMETRIC SHAFTED TRACTORS Z= 17/17 H=81mm

KEY ad. EASTERS 946

DOUBLE GEAR ad. PASQUALI 946 Z= 32/36

CLUTCH DISC ad. PASQUALI D=212mm Z=10 (29x23)

DIAFRAM SPIDER CLUTCH ad. PASQUALI 906/931/950/945 D=180mm

DIAFRAM SPINGING CLUTCH ad. PASQUALI 950/958 D=190mm

FORT TIGROTTO CONICAL CLUTCH ad. PASQUALI DIESEL H=69mm Z=8 (15X12) D=23mm

COMPLETE KIT SPINGIDISCO + CLUTCH DISC + SLEEVE ad. PASQUALI 950/958 D=190mm

CONICAL PAIR WITH INTEGRAL AXIS ad. PASQUALI 598 Z=9/26

CLUTCH DISC ad. PASQUALI 904 D=160mm Z=10 29X24mm

MILLER BEARING SHAFT ad. PASQUALI 12 HP

CONICAL PAIR ad. PASQUALI 12 HP SQUARE Z=12/22

milling cutter shaft ad. PASQUALI 18 HP

CONICAL PAIR ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. PASQUALI 598 Z=9/30

CLUTCH SLEEVE ad. PASQUALI D=67mm d=35mm

CLUTCH SLEEVE ad. PASQUALI AND VARIOUS MODELS D=82mm d=33mm

LEVER CLUTCH 9 SPRINGS SPINGIDISCO ad. PASQUALI 950/958 D=190m

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 950/958 D=190mm

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 906/931/950/945 D=185mm

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 917/934 D=160mm

CLUTCH DISC ad. PASQUALI 950/958/990 D=190mm Z=10 (29X23)

CLUTCH DISC ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

COPPIA CONICA ad. GOLDONI Z=10/29 FRESA 50 CON BATTENTE

GOLDONI ORIGINAL DUST CAP REF. ORIG. 057/17132

SLEEVE REGISPINTA ad. GOLDONI F&M AND MISCELLANEOUS D=48mm d=24mm

ORIGINAL GOLDONI BUSHING 057/4368

GOLDONI ORIGINAL BUSHING 3530PF9 REF. ORIG. 057/6250028

ORIGINAL GOLDONI SEALING RING 057/6250028

GOLDONI ORIGINAL CAP REF. ORIG. 057/13764

FLANGE SHORT HOPE HOLDER ad. GOLDONI FRESA 21M

PRIMARY SHAFT ad. GOLDONI 10 HP

GOLDONI MILLING PINION 60 Z=12

GOLDONI SPROCKET Z=10 MILLING CUTTER 50 WITHOUT KNOCKER

GOLDONI SPROCKET Z=10 TILLER 50 WITH KNOCKER

SPROCKET ad. GOLDONI MILLING CUTTER 28 Z=11

SPROCKET ad. GOLDONI MILLING CUTTER 25 Z=10

GEAR ad. GOLDONI UNIVERSAL 224/225/226/230 Z=6/19

GEAR ad. GOLDONI UNIVERSAL 224/225/226/230 Z=18/19

MONODISCO CLUTCH ad. GOLDONS D=110mm

BIDISK CLUTCH ad. GOLDONI D=110mm Z=8

SCANALED BUSH ad. GOLDONI TILLER 21/21M Z=12

CONICAL GEAR SPROCKET ad. SUPER SPECIAL GOLDONI

ORIGINAL GOLDONI SPECIAL 140 SOLO HANDLE D=38mm d=24mm

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

ORIGINAL CLUTCH FORK SUPER SPECIAL GOLDONI

CLUTCH DISCS WITH PAD SEAL ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIGINAL REF. 6300038

MALE RING HOOK FOR DIFFERENTIAL BLOCKING ad. GOLDONI MONDIAL

DIFFERENTIAL SHAFT ad. GOLDONI MONDIAL

GOLDONI SUPER SPECIAL MOBILE DIFFERENTIAL LOCK CLUTCH

GOLDONI CUP SPRING MILLING CUTTER 22/22M

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

GOLDONI MONDIAL BRAKE DRUM

GOLDONI MONDIAL CLUTCH SPRING GUIDE CAP

GOLDONI BEVEL GEAR PAIR MILLING CUTTER 60 Z=12/41

PRIMARY TRACTOR SHAFT ad. GOLDONI WALKING TRACTOR

GOLDONI BEVEL GEAR PAIR Z=10/34 TILLER 50 WITHOUT CLAPPER

BEARING 7208 ad. GOLDONI SUPER SPECIAL TILLER 22/22M

BEARING 7207 ad. MONDIAL GOLDONI TILLER 21/21M

Bearing 3206 ad. GOLDONI SUPER SPECIAL TILLER 22/22M

BEARING RECORD ad. GOLDONI SPECIAL 140 D=60mm d=30mm

CONICAL PAIR ad. GOLDONI MILLING CUTTER 25 Z=10/39

GOLDONI BEVEL GEAR PAIR Z=10/34 TILLER 50 WITH KNOCKER

CLUTCH DISC ad. BCS BARBIERI GOLDONI D=159mm Z=10 (19X15)

TRIPLE GEAR ad. GOLDONI 719 Z=30/15/19

milling cutter pin ad. MONDIAL GOLDONI MILLING CUTTER 21/21M

FORK FOR HOOKS ad. SUPER SPECIAL GOLDONI

CONICAL PAIR ad. GOLDONI 28 Z=11/41 REF.ORIG. 40414-40413

LATERAL COVER GASKET ad. GOLDONI 22 22M

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

SPINGIDISCO LEVER CLUTCH ad. GOLDONI SUPER UNIVERSAL D=216mm

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 FOR CROWN + LONG AXIS Z=33

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22M Z=29 REF. ORIG. 0015146

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 REF. ORIG. 0003254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22M Z=10/29 REF. ORIG. 0015146+0015836

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22 Z=33 REF. ORIG. 3252

LOWER SPROCKET ad. GOLDONI FRESA 22 Z=10 REF. ORIG. 3254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22 Z=10/33 REF. ORIG. 3254+3252

CROWN + LOWER AXLE RIGATO ad. GOLDONI MILLING CUTTER 21M Z=25 REF. ORIG. 15134

LOWER CONICAL PAIR ad. GOLDONI TILLER 21M Z=9/25 REF. ORIG. 21.02679+15134

CROWN + LOWER AXLE SMOOTH ad. GOLDONI MILLING CUTTER 21 Z=25 REF. ORIG. 4899

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 21/21M Z=9 REF. ORIG. 21.02679

LOWER CONICAL PAIR ad. GOLDONI MILLING CUTTER 21 Z=9/25 REF. ORIG. 4899+21.02679

DIFFERENTIAL BLOCK ENGAGEMENT ad. SUPER SPECIAL GOLDONI

SCANALED BUSH ad. GOLDONI FRESA 22/22M FERRARI 74 Z=6

CARTER PROTECTION BLADE ad. GOLDONI TILLER 22/22M

CARTER PROTECTION BLADE ad. GOLDONI TILLER 21/21M

TRANSFER ROLLER ad. SUPER SPECIAL GOLDONI

CLUTCH LEVER COVER ad. SUPER SPECIAL GOLDONI

SPINOTTO FRESA ad. SUPER SPECIAL GOLDONI

CLUTCH FORK ad. SUPER SPECIAL GOLDONI

CLUTCH SPRING ad. MONDIAL GOLDONI REF. ORIG. 200998

PRIMARY SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=9/15 REF. ORIG. 0004293

GEAR SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=13 REF. ORIG. 0004292

DIFFERENTIAL SHAFT ad. SUPER SPECIAL 140 GOLDONI REF.ORIG. 02466

POWER TAKEOFF SHAFT ad. SUPER SPECIAL GOLDONI

ROLLER CAGE FOR TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

FRONT GEAR ad. SUPER SPECIAL GOLDONI Z=10/28 REF. ORIG. 5358

DOUBLE REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=14/30/36 REF. ORIG. 003974

DOUBLE GEAR GOLDONI ad. SUPER SPECIAL GOLDONI Z=12/12 REF.ORIG. 4318

DOUBLE GEAR GEAR GEAR ad. SUPER SPECIAL GOLDONI Z=6/29/35 REF. ORIG. 004289

REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=35 REF. ORIG. 0005359

SHIFT LEVER ad. SUPER SPECIAL 140 GOLDONI REF. ORIG. 0000170

KIT X2 SATELLITE DIFFERENTIAL + PIN SHAFT ad. SUPER SPECIAL GOLDONI Z=9 REF. ORIG. 130-5588 20002-20003

LEFT PLANETARY ad. SUPER SPECIAL 140 GOLDONI Z=12 REF. ORIG. 0008615

RIGHT PLANETARY ad. SUPER SPECIAL 140 GOLDONI Z=12 REF. ORIG. 0008614

BRAKE BELT GANASCIA ad. SUPER SPECIAL GOLDONI REF. ORIG. 0000180

BRAKE DRUM ad. SUPER SPECIAL GOLDONI REF. ORIG. 000179

Gears gear selector plate ad. GOLDONI REF. ORIG. 0000169

WHEEL HUB ad. GOLDONI MONDIAL FRESA 21/21M

LONG-TYPE HOLDERS ad. GOLDONI CUTTER 22M

LONG-TYPE HOLDERS ad. GOLDONI FRESA 22 REF. ORIG. 003981

SHORT TYPE HOLDERS ad. GOLDONI FRESA 21

LONG-TYPE HOLDERS ad. GOLDONI MONDIAL FRESA 21 REF.ORIG. 21-02689

SHORT HOLDING FLANGE ad. GOLDONI FRESA 22 Z=12 REF. ORIG. 0003979

WHEEL SUPPORT ad. SUPER SPECIAL GOLDONI TILLER 22/22M

WHEEL SUPPORT ad. GOLDONI MONDIAL REF. ORIG. 22694

MILLER COVER ad. GOLDONI 22M

LATERAL COVER ad. GOLDONI FRESA 22 REF. ORIG. 000443

LATERAL COVER ad. GOLDONI FRESA 21/21M REF. ORIG. 00002685

TIRANTE ad. GOLDONI FRESA 22

REAR DRIVE TIRANT ad. GOLDONI FRESA 22/22M

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. GOLDONS D=160mm

MULTIDISCO clutch ad. GOLDONI MONDIAL

CLUTCH DISC ad. GOLDONI EXPORT 518/521/718/719 D=184mm Z=10 (19X15)

CLUTCH DISC ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIG. REF. 6300038

LOWER CONICAL PAIR ad. ADRIATIC OMEGA AND FERRET Z=8/23 REF. ORIG. 15.07.2.1010 + 15.07.1.1010

CONICAL CLUTCH ad. ADRIATIC DIESEL H=92mm Z=6 (14X11) D=23mm

CONICAL PAIR ad. ADRIATIC Z=9/22

CLUTCH DISC ad. RANDI ADRIATICA TRATTORINO 845 D=216mm Z=20 (23X20)

CLUTCH DISC ad. RANDI ADRIATICA 2500/3000/3500 D=160mm Z=10 (19X16)

milling shaft ad. ADRIATIC MASTERMEC

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

CLUTCH DISC ad. RANDI ADRIATICA Z=42

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH CUP SPRING ad. RANDI ADRIATIC

CLUTCH DISC DISC DISC ad. MAB T4 ADRIATICA

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. ADRIATIC MINIMEC SUPERMEC D=155mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO MILLERIGHI

SPROCKET ad. VALPADANA VMC10 10 HP Z=11 FOR CROWN Z=25

SPROCKET ad. VALPADANA VMC14 N.T. Z=9 FOR CROWN Z=27

CLUTCH DISCS WITH PARASTRAPPI ad. VALPADANA LANDINI D=220mm Z=16mm (30X27)

milling cutter shaft ad. VALPADANA VMC10 SEP 1300/1700 ES=27mm

CONICAL PAIR ad. VALPADANA VMC10 10 HP Z=11/25

milling cutter shaft ad. VALPADANA VMC18

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=250mm

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=235mm

milling cutter shaft ad. VALPADANA VMC150

CONICAL PAIR ad. VALPADANA VMC150 Z=9/24

CONICAL PAIR ad. VALPADANA VMC18 Z=11/34

POWER TAKEOFF SHAFT ad. VALPADANA VMC14

milling cutter shaft ad. VALPADANA VMC14

CONICAL PAIR ad. VALPADANA VMC14 Z=8/27

CONICAL PAIR ad. VALPADANA VMC14 N.T. Z=9/27

CONICAL PAIR ad. VALPADANA VMC14 Z=9/24

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. VALPADANA SEP 140 130 2nd SERIES D=122mm Z=15 (28x24)

CLUTCH DISC ad. VALPADANA AGRIA 2700 3800 D=216mm Z=10 (22X18)

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIG. REF. 6300038

PINION MOTOCULTIVATOR FERRARI 72 73 TEETH 9 FOR SPROCKET TEETH 22

UPPER SPROCKET ad. FERRARI 72 Z=15 L=280mm

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

LOWER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/29

TRIPLE GEAR ad. FERRARI 34 EUROSYSTEM 102 Z=26/23/11

UPPER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/25

milling cutter shaft ad. FERRARI 34 FULL EUROSYSTEM ES=27mm

POWER TAKE-OFF SHAFT ad. FERRARI 72/73

HUB II ELEMENT ad. FERRARI 34 ES=27

HUB I ELEMENT ad. FERRARI 34 ES=27

TREE AXLE PORTA FRESA ad. FERRARINE

CONICAL PAIR ad. FERRARINE Z=9/21

MILLER SHAFT SHAFT ad. FERRARI 72/73

CONICAL PAIR ad. FERRARI 72/73 Z=9/22

MILLER SHAFT SHAFT ad. FERRARI 74/75

CONICAL PAIR ad. FERRARI 74/75 Z=8/26

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. FERRARI D=160mm

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI MC58 MT65/60 D=184mm Z=10 (29X23)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

CLUTCH DISC ad. FERRARI 72 MIRA HP 10/12/14 D=140mm Z=6 (17X14)

PIGNONE INFERIORE ad. SEP 140 Z=8 L=265mm

PRIMARY SHAFT SEP 125

LOWER SPROCKET ad. SEP 125 Z=8

LOWER CONICAL PAIR ad. SEP 140 Z=7/26

LOWER CONICAL PAIR ad. SEP 138 V.T. Z=8/29

DOUBLE GEAR ad. SEP 125 Z=14/18

SEP140 CLUTCH BELL LAST SERIES

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

milling cutter shaft ad. SEP 140 GROOVED

MILLER BEARING SHAFT ad. SEP 140 ES=27

milling cutter shaft ad. SEP 125 ES=27 VMC150

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

CONICAL PAIR ad. SEP 140 Z=7/26

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

CLUTCH DISC ad. SEP 70/125 D=83x5mm Z=15 (28x24)

SPROCKET ad. BERTOLINI 310S Z=7 FOR CROWN Z=19

CONICAL PAIR ad. BERTOLINI Z=8/20 V.T.

CLUTCH DISCS WITH PARASTRAPPI ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH SLEEVE ad. BERTOLINI D=57mm d=27mm

CONICAL PAIR ad. BERTOLINI 10 HP Z=9/25

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=180mm

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=160mm

milling cutter shaft ad. BERTOLINI 10 HP

BERTOLINI MILLING CUTTER SHAFT NUT

CONICAL PAIR ad. BERTOLINI 12 HP Z=10/24

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

milling cutter shaft ad. BERTOLINI 12 14 HP

milling cutter shaft ad. BERTOLINI 18 HP

CONICAL PAIR ad. BERTOLINI 310S Z=7/19

CONICAL PAIR ad. BERTOLINI 320/330 18 HP Z=9/20

CONICAL PAIR ad. BERTOLINI Z=9/30

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

CLUTCH DISC ad. BERTOLINI SERIES 300 D=80mm Z=12 (20X17)

CLUTCH DISC ad. AGRIA 1900/3800/2800 HATZ E 780 D=181 Z=14 (25X22)

CONICAL PAIR ad. AGRIA 1900/3800 Z=10/38

SPINGIDISCO LEVER CLUTCH ad. AGRIA D=160mm

CLUTCH DISC ad. VALPADANA AGRIA 2700 3800 D=216mm Z=10 (22X18)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

DISCO FRIZIONE CON PARASTRAPPI ad. ANTONIO CARRARO TIGRE 3700 D=185mm Z=20 (17X15)

CONICAL PAIR ad. CARRARINE Z=8/25

CONICAL PAIR + INTEGRAL AXIS ad. CARRARINE Z=8/25

MILLER TREE HOLDER ad. PGS

CONICAL PAIR ad. PGS ATTILA SUP. ROMA 38 Z=11/28

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. LAMPACRESCIA TYPE M D=140mm Z=6 (20X16)

CLUTCH DISC ad. FERRARI 72 MIRA HP 10/12/14 D=140mm Z=6 (17X14)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=138mm Z=15 (24X21)

DISCO FRIZIONE ad. CAB HATZ AEBI HOLDER D=180mm Z=10 (23x18) ALTEZZA MOZZO 30mm

PIGNONCINO CAMBIO ad. SEP 140 VALPADANA Z=11 INTERNO MILLERIGHI

COPPIA CONICA ad. GOLDONI Z=10/29 FRESA 50 CON BATTENTE

DISCO FRIZIONE ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

COPPIA CONICA CON ASSE MILLERIGHE INTEGRALE ad. PASQUALI 598 Z=9/26 ALLOGGIO ALBERO CENTRALE CUSCINETTO D=45mm

PIGNONE INFERIORE ad. SEP 140 Z=8 L=265mm

ALBERO PORTA FRESA LISCIO ad. PASQUALI Z=8

DISCO FRIZIONE CON PARASTRAPPI ad. ANTONIO CARRARO TIGRE 3700 D=185mm Z=20 (17X15)

SINGLE CLUTCHING DISC ad. BCS MOTOFALCIATRICE 622/705/715/735 NIBBI BRUNO MOTOFALCIATRICE D=178 Z=15 (25x20)

SPROCKET ad. BERTOLINI 310S Z=7 FOR CROWN Z=19

PINION MOTOCULTIVATOR FERRARI 72 73 TEETH 9 FOR SPROCKET TEETH 22

SPROCKET ad. PASQUALI 917 12 HP SQUARE Z=12 FOR CROWN Z=22

PINION ad. EASTER 598 Z=9 FOR CROWN Z=26

SPROCKET ad. EASTER 598 Z=9 FOR CROWN Z=30

SPROCKET ad. VALPADANA VMC10 10 HP Z=11 FOR CROWN Z=25

SPROCKET ad. VALPADANA VMC14 N.T. Z=9 FOR CROWN Z=27

milling cutter shaft ad. PASQUALI GROOVED

GOLDONI ORIGINAL DUST CAP REF. ORIG. 057/17132

CLUTCH DISCS WITH PARASTRAPPI ad. VALPADANA LANDINI D=220mm Z=16mm (30X27)

UPPER SPROCKET ad. FERRARI 72 Z=15 L=280mm

SLEEVE REGISPINTA ad. GOLDONI F&M AND MISCELLANEOUS D=48mm d=24mm

CONICAL PAIR ad. BERTOLINI Z=8/20 V.T.

ORIGINAL GOLDONI BUSHING 057/4368

GOLDONI ORIGINAL BUSHING 3530PF9 REF. ORIG. 057/6250028

ORIGINAL GOLDONI SEALING RING 057/6250028

GOLDONI ORIGINAL CAP REF. ORIG. 057/13764

MILLER SHAFT TREE ad. PASQUALI Z=8

FLANGE SHORT HOPE HOLDER ad. GOLDONI FRESA 21M

PRIMARY SHAFT ad. GOLDONI 10 HP

GOLDONI MILLING PINION 60 Z=12

GOLDONI SPROCKET Z=10 MILLING CUTTER 50 WITHOUT KNOCKER

GOLDONI SPROCKET Z=10 TILLER 50 WITH KNOCKER

SPROCKET ad. GOLDONI MILLING CUTTER 28 Z=11

SPROCKET ad. GOLDONI MILLING CUTTER 25 Z=10

REAR DRIVE GEAR ad. PASQUALI SERIES 900 AND SIMILAR MOTOCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=39 D=123mm H=10mm INTERNAL ENGINE 40X51 CONICAL NECK

GEAR GEAR Gearbox ad. PASQUALI SERIES 900 AND SIMILAR MOTOCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=38mm INTERNAL ENGINE 40X51 CONICAL NECK

REAR DRIVE GEAR ad. PASQUALI SERIES 900 MOTORCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=38mm INDEX ENGINE 40X51 RIGHT NECK

REAR DRIVE GEAR ad. PASQUALI SERIES 900 MOTORCULTIVATORS AND TRACTORS ISODIAMETRIC SHAFT Z=26 D=84mm H=43mm INSIDE ENGINE 40X51

SLIDING GEAR ad. PASQUALI SERIES 900 Z=14 D=51mm 6 INNER CABLES

DOUBLE GEARGE ad. PASQUALI SERIES 900/945/946 AND SIMILAR MOTORCULTIVATORS AND ISODIAMETRIC SHAFTED TRACTORS Z= 17/17 H=81mm

CLUTCH DISC ad. CARRARO D=200mm Z=10 (26x21)

CROWN ad. PGS ATTILA SUP. ROMA 38 Z=28 FOR PINION Z=11

LONG TYPE PINION ad. PGS ATTILA SUP. ROMA 38 Z=11 FOR CROWN Z=28 L=272mm

PINION TYPE SHORT ad. PGS ATTILA SUP. ROMA 38 Z=11 FOR CROWN Z=28 L=235mm

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

COUPLE CONICAL LONG PIGNON ad. PGS ATTILA SUP. ROMA 38 Z=11/28

COUPLE CONICAL SHORT PINION ad. PGS ATTILA SUP. ROMA 38 Z=11/28

milling cutter shaft ad. VALPADANA VMC10 SEP 1300/1700 ES=27mm

CONICAL PAIR ad. VALPADANA VMC10 10 HP Z=11/25

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

KEY ad. EASTERS 946

DOUBLE GEAR ad. PASQUALI 946 Z= 32/36

GEAR ad. GOLDONI UNIVERSAL 224/225/226/230 Z=6/19

GEAR ad. GOLDONI UNIVERSAL 224/225/226/230 Z=18/19

CLUTCH DISCS WITH PARASTRAPPI ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH SLEEVE ad. BERTOLINI D=57mm d=27mm

STEEL CLUTCH CONE ad. BCS Z=8 (15X12)

STEEL CLUTCH CONE ad. FERRARI CRICKET MECC. BENASSI BERTOLINI BCS CARRARO MAB Z=8 (15x12)

MONODISCO CLUTCH ad. GOLDONS D=110mm

BIDISK CLUTCH ad. GOLDONI D=110mm Z=8

SCANALED BUSH ad. GOLDONI TILLER 21/21M Z=12

CONICAL GEAR SPROCKET ad. SUPER SPECIAL GOLDONI

CLUTCH DISCS WITH PARTICLES ad. FIAT SEAT D=216mm Z=20mm (23X20)

LOWER CONICAL PAIR ad. ADRIATIC OMEGA AND FERRET Z=8/23 REF. ORIG. 15.07.2.1010 + 15.07.1.1010

CONICAL PAIR ad. BERTOLINI 10 HP Z=9/25

ORIGINAL GOLDONI SPECIAL 140 SOLO HANDLE D=38mm d=24mm

SPRING ORIGINAL BEARING BENASSI BARBIERI BRUMI FORT GOLDONI

ORIGINAL CLUTCH FORK SUPER SPECIAL GOLDONI

CLUTCH DISCS WITH PAD SEAL ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIGINAL REF. 6300038

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=180mm

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=160mm

CLUTCH DISC ad. PASQUALI D=212mm Z=10 (29x23)

DIAFRAM SPIDER CLUTCH ad. PASQUALI 906/931/950/945 D=180mm

DIAFRAM SPINGING CLUTCH ad. PASQUALI 950/958 D=190mm

MALE RING HOOK FOR DIFFERENTIAL BLOCKING ad. GOLDONI MONDIAL

DIFFERENTIAL SHAFT ad. GOLDONI MONDIAL

GOLDONI SUPER SPECIAL MOBILE DIFFERENTIAL LOCK CLUTCH

GOLDONI CUP SPRING MILLING CUTTER 22/22M

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

GOLDONI MONDIAL BRAKE DRUM

GOLDONI MONDIAL CLUTCH SPRING GUIDE CAP

GOLDONI BEVEL GEAR PAIR MILLING CUTTER 60 Z=12/41

REVERSE PIN MOTOR CULTIVATOR PGS ROMA38

milling cutter shaft ad. BERTOLINI 10 HP

BERTOLINI MILLING CUTTER SHAFT NUT

CONICAL PAIR ad. BERTOLINI 12 HP Z=10/24

LOWER CONICAL PAIR ad. SEP 140 Z=7/26

LOWER CONICAL PAIR ad. SEP 138 V.T. Z=8/29

CONICAL CLUTCH ad. ADRIATIC DIESEL H=92mm Z=6 (14X11) D=23mm

FORT TIGROTTO CONICAL CLUTCH ad. PASQUALI DIESEL H=69mm Z=8 (15X12) D=23mm

STEEL CLUTCH CONE ad. GOLDONI MONDIAL Z=8 REF. ORIG. 200973

CLUTCH BELL ad. GOLDONI

COMPLETE KIT SPINGIDISCO + CLUTCH DISC + SLEEVE ad. PASQUALI 950/958 D=190mm

STEEL CLUTCH CONE ad. BCS 606

UPPER CONICAL PAIR ad. F&M R5

LOWER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/29

TRIPLE GEAR ad. FERRARI 34 EUROSYSTEM 102 Z=26/23/11

UPPER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/25

milling cutter shaft ad. FERRARI 34 FULL EUROSYSTEM ES=27mm

PRIMARY TRACTOR SHAFT ad. GOLDONI WALKING TRACTOR

GOLDONI BEVEL GEAR PAIR Z=10/34 TILLER 50 WITHOUT CLAPPER

BEARING 7208 ad. GOLDONI SUPER SPECIAL TILLER 22/22M

BEARING 7207 ad. MONDIAL GOLDONI TILLER 21/21M

Bearing 3206 ad. GOLDONI SUPER SPECIAL TILLER 22/22M

BEARING RECORD ad. GOLDONI SPECIAL 140 D=60mm d=30mm

CONICAL PAIR ad. GOLDONI MILLING CUTTER 25 Z=10/39

GOLDONI BEVEL GEAR PAIR Z=10/34 TILLER 50 WITH KNOCKER

POWER TAKE-OFF SHAFT ad. FERRARI 72/73

CONICAL PAIR ad. CARRARINE Z=8/25

CLUTCH DISC ad. AGRIA 1900/3800/2800 HATZ E 780 D=181 Z=14 (25X22)

KIT MOTORSTOP SAFETY DEVICE UNIVERSAL ANTINFORTUNISTIC GASoline ad. BRUMI/BARBIERI/SEP

CONICAL PAIR WITH INTEGRAL AXIS ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. ADRIATIC Z=9/22

milling cutter shaft ad. VALPADANA VMC18

CLUTCH DISC ad. PASQUALI 904 D=160mm Z=10 29X24mm

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=250mm

POWER TAKEOFF SHAFT ad. VALPADANA VMC14 L=235mm

milling cutter shaft ad. VALPADANA VMC150

CONICAL PAIR ad. VALPADANA VMC150 Z=9/24

CLUTCH DISC ad. RANDI ADRIATICA TRATTORINO 845 D=216mm Z=20 (23X20)

CLUTCH DISC ad. RANDI ADRIATICA 2500/3000/3500 D=160mm Z=10 (19X16)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CONICAL PAIR + INTEGRAL AXIS ad. CARRARINE Z=8/25

TRIPLE GEAR ad. GOLDONI 719 Z=30/15/19

milling cutter pin ad. MONDIAL GOLDONI MILLING CUTTER 21/21M

FORK FOR HOOKS ad. SUPER SPECIAL GOLDONI

milling shaft ad. ADRIATIC MASTERMEC

CONICAL PAIR ad. AGRIA 1900/3800 Z=10/38

milling cutter shaft ad. SEP 140 GROOVED

MILLER BEARING SHAFT ad. SEP 140 ES=27

milling cutter shaft ad. SEP 125 ES=27 VMC150

UPPER CONICAL PAIR ad. SEP 140 Z=6/20

CONICAL PAIR ad. SEP 140 Z=7/26

MILLER TREE HOLDER ad. PGS

CONICAL PAIR ad. PGS ATTILA SUP. ROMA 38 Z=11/28

milling cutter shaft ad. BERTOLINI 12 14 HP

milling cutter shaft ad. BERTOLINI 18 HP

CONICAL PAIR ad. BERTOLINI 310S Z=7/19

CONICAL PAIR ad. BERTOLINI 320/330 18 HP Z=9/20

CONICAL PAIR ad. BERTOLINI Z=9/30

TREE AXLE PORTA FRESA ad. FERRARINE

CONICAL PAIR ad. FERRARINE Z=9/21

MILLER SHAFT SHAFT ad. FERRARI 72/73

CONICAL PAIR ad. FERRARI 72/73 Z=9/22

MILLER SHAFT SHAFT ad. FERRARI 74/75

CONICAL PAIR ad. FERRARI 74/75 Z=8/26

MILLER BEARING SHAFT ad. PASQUALI 12 HP

CONICAL PAIR ad. VALPADANA VMC18 Z=11/34

CONICAL PAIR ad. GOLDONI 28 Z=11/41 REF.ORIG. 40414-40413

LATERAL COVER GASKET ad. GOLDONI 22 22M

TRANSMISSION SHAFT ad. SUPER SPECIAL GOLDONI REF.ORIG. 000146

SPINGIDISCO LEVER CLUTCH ad. GOLDONI SUPER UNIVERSAL D=216mm

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CONICAL PAIR ad. PASQUALI 12 HP SQUARE Z=12/22

milling cutter shaft ad. PASQUALI 18 HP

CONICAL PAIR ad. PASQUALI 598 Z=9/26

CONICAL PAIR ad. PASQUALI 598 Z=9/30

POWER TAKEOFF SHAFT ad. VALPADANA VMC14

milling cutter shaft ad. VALPADANA VMC14

CONICAL PAIR ad. VALPADANA VMC14 Z=8/27

CONICAL PAIR ad. VALPADANA VMC14 N.T. Z=9/27

CONICAL PAIR ad. VALPADANA VMC14 Z=9/24

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 FOR CROWN + LONG AXIS Z=33

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22M Z=29 REF. ORIG. 0015146

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 22M Z=10 REF. ORIG. 0003254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22M Z=10/29 REF. ORIG. 0015146+0015836

CROWN + LOWER AXLE ad. GOLDONI MILLING CUTTER 22 Z=33 REF. ORIG. 3252

LOWER SPROCKET ad. GOLDONI FRESA 22 Z=10 REF. ORIG. 3254

LOWER CONICAL PAIR ad. GOLDONI FRESA 22 Z=10/33 REF. ORIG. 3254+3252

CROWN + LOWER AXLE RIGATO ad. GOLDONI MILLING CUTTER 21M Z=25 REF. ORIG. 15134

LOWER CONICAL PAIR ad. GOLDONI TILLER 21M Z=9/25 REF. ORIG. 21.02679+15134

CROWN + LOWER AXLE SMOOTH ad. GOLDONI MILLING CUTTER 21 Z=25 REF. ORIG. 4899

LOWER SPROCKET ad. GOLDONI MILLING CUTTER 21/21M Z=9 REF. ORIG. 21.02679

LOWER CONICAL PAIR ad. GOLDONI MILLING CUTTER 21 Z=9/25 REF. ORIG. 4899+21.02679

DIFFERENTIAL BLOCK ENGAGEMENT ad. SUPER SPECIAL GOLDONI

SCANALED BUSH ad. GOLDONI FRESA 22/22M FERRARI 74 Z=6

CARTER PROTECTION BLADE ad. GOLDONI TILLER 22/22M

CARTER PROTECTION BLADE ad. GOLDONI TILLER 21/21M

TRANSFER ROLLER ad. SUPER SPECIAL GOLDONI

CLUTCH LEVER COVER ad. SUPER SPECIAL GOLDONI

SPINOTTO FRESA ad. SUPER SPECIAL GOLDONI

CLUTCH FORK ad. SUPER SPECIAL GOLDONI

CLUTCH SPRING ad. MONDIAL GOLDONI REF. ORIG. 200998

PRIMARY SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=9/15 REF. ORIG. 0004293

GEAR SHAFT ad. SUPER SPECIAL 140 GOLDONI Z=13 REF. ORIG. 0004292

DIFFERENTIAL SHAFT ad. SUPER SPECIAL 140 GOLDONI REF.ORIG. 02466

POWER TAKEOFF SHAFT ad. SUPER SPECIAL GOLDONI

ROLLER CAGE FOR TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

TRIPLE GEAR ad. SUPER SPECIAL 140 GOLDONI Z=32/17/23 REF. ORIG. 0004290

FRONT GEAR ad. SUPER SPECIAL GOLDONI Z=10/28 REF. ORIG. 5358

DOUBLE REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=14/30/36 REF. ORIG. 003974

DOUBLE GEAR GOLDONI ad. SUPER SPECIAL GOLDONI Z=12/12 REF.ORIG. 4318

DOUBLE GEAR GEAR GEAR ad. SUPER SPECIAL GOLDONI Z=6/29/35 REF. ORIG. 004289

REDUCTION GEAR ad. SUPER SPECIAL GOLDONI Z=35 REF. ORIG. 0005359

SHIFT LEVER ad. SUPER SPECIAL 140 GOLDONI REF. ORIG. 0000170

KIT X2 SATELLITE DIFFERENTIAL + PIN SHAFT ad. SUPER SPECIAL GOLDONI Z=9 REF. ORIG. 130-5588 20002-20003

LEFT PLANETARY ad. SUPER SPECIAL 140 GOLDONI Z=12 REF. ORIG. 0008615

RIGHT PLANETARY ad. SUPER SPECIAL 140 GOLDONI Z=12 REF. ORIG. 0008614

BRAKE BELT GANASCIA ad. SUPER SPECIAL GOLDONI REF. ORIG. 0000180

BRAKE DRUM ad. SUPER SPECIAL GOLDONI REF. ORIG. 000179

Gears gear selector plate ad. GOLDONI REF. ORIG. 0000169

WHEEL HUB ad. GOLDONI MONDIAL FRESA 21/21M

LONG-TYPE HOLDERS ad. GOLDONI CUTTER 22M

LONG-TYPE HOLDERS ad. GOLDONI FRESA 22 REF. ORIG. 003981

SHORT TYPE HOLDERS ad. GOLDONI FRESA 21

LONG-TYPE HOLDERS ad. GOLDONI MONDIAL FRESA 21 REF.ORIG. 21-02689

SHORT HOLDING FLANGE ad. GOLDONI FRESA 22 Z=12 REF. ORIG. 0003979

WHEEL SUPPORT ad. SUPER SPECIAL GOLDONI TILLER 22/22M

WHEEL SUPPORT ad. GOLDONI MONDIAL REF. ORIG. 22694

MILLER COVER ad. GOLDONI 22M

LATERAL COVER ad. GOLDONI FRESA 22 REF. ORIG. 000443

LATERAL COVER ad. GOLDONI FRESA 21/21M REF. ORIG. 00002685

TIRANTE ad. GOLDONI FRESA 22

REAR DRIVE TIRANT ad. GOLDONI FRESA 22/22M

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

CLUTCH SLEEVE WITH BEARING ad. BENASSI BERTOLINI BARBIERI BRUMI FORT

CLUTCH SLEEVE ad. PASQUALI D=67mm d=35mm

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH SLEEVE ad. PASQUALI AND VARIOUS MODELS D=82mm d=33mm

LEVER CLUTCH 9 SPRINGS SPINGIDISCO ad. PASQUALI 950/958 D=190m

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 950/958 D=190mm

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 906/931/950/945 D=185mm

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 917/934 D=160mm

SPINGIDISCO LEVER CLUTCH ad. FERRARI D=160mm

SPINGIDISCO LEVER CLUTCH ad. GOLDONS D=160mm

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

SPINGIDISCO LEVER CLUTCH ad. AGRIA D=160mm

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

MULTIDISCO clutch ad. GOLDONI MONDIAL

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. RANDI ADRIATICA Z=42

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC ad. SEP 70/125 D=83x5mm Z=15 (28x24)

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH DISC ad. VALPADANA SEP 140 130 2nd SERIES D=122mm Z=15 (28x24)

CLUTCH CUP SPRING ad. RANDI ADRIATIC

CLUTCH DISC DISC DISC ad. MAB T4 ADRIATICA

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC ad. VALPADANA AGRIA 2700 3800 D=216mm Z=10 (22X18)

CLUTCH DISC ad. PASQUALI 950/958/990 D=190mm Z=10 (29X23)

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISC ad. GOLDONI EXPORT 518/521/718/719 D=184mm Z=10 (19X15)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI MC58 MT65/60 D=184mm Z=10 (29X23)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

CLUTCH DISC ad. ADRIATIC MINIMEC SUPERMEC D=155mm Z=20 (17X15)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

CLUTCH DISC ad. LAMPACRESCIA TYPE M D=140mm Z=6 (20X16)

CLUTCH DISC ad. FERRARI 72 MIRA HP 10/12/14 D=140mm Z=6 (17X14)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=138mm Z=15 (24X21)

CLUTCH DISC ad. BERTOLINI SERIES 300 D=80mm Z=12 (20X17)

CLUTCH DISC ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIG. REF. 6300038

DISCO FRIZIONE ad. CAB HATZ AEBI HOLDER D=180mm Z=10 (23x18) ALTEZZA MOZZO 30mm

ORIGINAL GOLDONI FERRARI VALPADANA MAG FORT BENASSI SYNTERIZED CLUTCH DISC D=110mm

CLUTCH DISC ad. FORT D=160mm Z=10 (20x16)

SINGLE CLUTCHING DISC ad. BCS MOTOFALCIATRICE 622/705/715/735 NIBBI BRUNO MOTOFALCIATRICE D=178 Z=15 (25x20)

CLUTCH DISCS WITH PARASTRAPPI ad. VALPADANA LANDINI D=220mm Z=16mm (30X27)

CLUTCH DISC ad. SEP 125 D=88mm Z=15 27x25

CLUTCH DISC ad. CARRARO D=200mm Z=10 (26x21)

CLUTCH DISCS WITH PARASTRAPPI ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

MULTISCO CLUTCH BEARING CARRIER PLATE FOR 6004 2RS BEARING

CLUTCH DISCS WITH PAD SEAL ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIGINAL REF. 6300038

CLUTCH DISC ad. PASQUALI D=212mm Z=10 (29x23)

CLUTCH DISCS WITH PARASTRAPPI ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC D=160mm Z=20 (17X15)

CLUTCH DISC D=160mm Z=20 (16X14)

CLUTCH DISC D=140mm Z=10 (26X21)

CLUTCH DISC ad. CARRARO TIGRE D=200mm Z=10 (29X23)

CLUTCH DISCS WITH PAD SEAL D=181mm Z=14 (20X18)

CLUTCH DISC D=179mm Z=10 (23X18)

GRIFO EXTRA CLUTCH DISC D=144mm Z=10 (26x21)

CLUTCH DISC ad. BCS BARBIERI GOLDONI D=159mm Z=10 (19X15)

CLUTCH DISC ad. AGRIA 1900/3800/2800 HATZ E 780 D=181 Z=14 (25X22)

TERMINAL DISC ad. F&M D7 D=108mm Z=8

CLUTCH DISC ad. PASQUALI 904 D=160mm Z=10 29X24mm

CLUTCH DISC ad. RANDI ADRIATICA TRATTORINO 845 D=216mm Z=20 (23X20)

CLUTCH DISC ad. RANDI ADRIATICA 2500/3000/3500 D=160mm Z=10 (19X16)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISCS WITH PARASTRAPPI ad. BARBIERI LEOPARD FB 1400 S. SPECIAL D=157mm Z=10 (19X15)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=132mm Z=15 (24X21)

LOW HUB CLUTCH DISC ad. CASORZO CU7 D=110mm Z=6 (30X26)

HIGH MOTION CLUTCH DISC ad. CASORZO CU6 D=110mm Z=6 (30X26)

DOUBLE BOMBING CLUTCH DISC ad. BCS MOTOFALCIATRICE 622/705/715/735 NIBBI BRUNO MOTOFALCIATRICE D=178 Z=15 25x21mm

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

CLUTCH DISC ad. SEP 125 D=88x11.5mm Z=15

CLUTCH DISC ad. RANDI ADRIATICA Z=42

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. OLD BARBIERI TYPE CONDOR FORT D=110mm d=32mm

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

CLUTCH DISC ad. F&M R5 D=94m Z=9 (17x15)

MONODISCO/BIDISCO CLUTCH DISCS ad. BRUMI SIMPLEX FORT D=94m Z=8 (15X13)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC ad. SEP 70/125 D=83x5mm Z=15 (28x24)

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH DISC ad. VALPADANA SEP 140 130 2nd SERIES D=122mm Z=15 (28x24)

CLUTCH CUP SPRING ad. RANDI ADRIATIC

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC ad. VALPADANA AGRIA 2700 3800 D=216mm Z=10 (22X18)

CLUTCH DISC ad. PASQUALI 950/958/990 D=190mm Z=10 (29X23)

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISC ad. GOLDONI EXPORT 518/521/718/719 D=184mm Z=10 (19X15)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI MC58 MT65/60 D=184mm Z=10 (29X23)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

CLUTCH DISC ad. MOTOCOLTIVATOR GRILLE 131 D=160mm Z=6 (16x13)

CLUTCH DISC ad. ADRIATIC MINIMEC SUPERMEC D=155mm Z=20 (17X15)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. MOTOZAPPA CASORZO SU4 VIGNETO D=145mm Z=10 (26X21)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

CLUTCH DISC ad. LAMPACRESCIA TYPE M D=140mm Z=6 (20X16)

CLUTCH DISC ad. FERRARI 72 MIRA HP 10/12/14 D=140mm Z=6 (17X14)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=138mm Z=15 (24X21)

CLUTCH DISC ad. BERTOLINI SERIES 300 D=80mm Z=12 (20X17)

CLUTCH DISC ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIG. REF. 6300038

MONODISCO CLUTCH ad. GOLDONS D=110mm

BIDISK CLUTCH ad. GOLDONI D=110mm Z=8

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=180mm

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=160mm

DIAFRAM SPIDER CLUTCH ad. PASQUALI 906/931/950/945 D=180mm

DIAFRAM SPINGING CLUTCH ad. PASQUALI 950/958 D=190mm

SPINGIDISCO LEVER CLUTCH ad. GOLDONI SUPER UNIVERSAL D=216mm

LEVER CLUTCH 9 SPRINGS SPINGIDISCO ad. PASQUALI 950/958 D=190m

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 950/958 D=190mm

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 906/931/950/945 D=185mm

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 917/934 D=160mm

SPINGIDISCO LEVER CLUTCH ad. FERRARI D=160mm

SPINGIDISCO LEVER CLUTCH ad. GOLDONS D=160mm

SPINGIDISCO LEVER CLUTCH ad. F&M L300 D=160mm

CLUTCH REVISION KIT ad. CRICKET 9000R MAB AND VARIOUS BRANDS

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

DIAFRAM CLUTCH SPINGIDISCO ad. GRILLE 131 D=160mm

SPINGIDISCO LEVER CLUTCH ad. AGRIA D=160mm

CONICAL CLUTCH ad. FORT TIGROTTO FOR 2-STROKE ENGINES H=83mm Z=8 (15x12) CONICAL ATTACHMENT 17/13

CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12) CONICAL ATTACHMENT 17/13 FOR MIXED ENGINES.

BEARING CAP FOR BEVEL CLUTCHES 17X40X12

TAPER AND MULTIDISC CLUTCH BEARING CAP FOR BEARING 6004 2RS

BROACHED HUB FOR Z=8 (15X12) BEVEL CLUTCH MODIFICATIONS

CONICAL CLUTCH ad. ADRIATIC DIESEL H=92mm Z=6 (14X11) D=23mm

CONICAL CLUTCH FORT EUROGARDEN HEIGHT 84mm TEETH 8 (15X12) DIAMETER 23mm

FORT TIGROTTO CONICAL CLUTCH ad. PASQUALI DIESEL H=69mm Z=8 (15X12) D=23mm

COMPONENTS FOR CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

UPPER CONICAL PAIR ad. FERRARI 34 EUROSYSTEM 102 Z=8/25

CONICAL CLUTCH ad. F&M R5 DIESEL H=85mm Z=9 (17x14)

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

MULTIDISCO CLUTCH PLATE D=102mm D=45mm

SPACER FOR MULTIDISC CLUTCHES

MULTIDISCO clutch ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (14x11) D=102mm

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

MULTIDISCO clutch ad. GOLDONI MONDIAL

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

LAMELLAR CLUTCH ad. F&M R5 Z=9 (17x14)

CLUTCH RING 4 HOLES ad. CRICKET 11,000 AND VARIOUS

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I125/150 D=88/91mm

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I80/90 D=81mm

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

DISCO FRIZIONE ad. CAB HATZ AEBI HOLDER D=180mm Z=10 (23x18) ALTEZZA MOZZO 30mm

STEEL CLUTCH CONE ORIGINAL BRUMI REKORD AND MINIREKORD REF. ORIG. 224100005

CLUTCH BELL WITH ORIGINAL FERODE BRUMI REKORD AND MINIREKORD REF. ORIG. 224100004

CLUTCH DISC ad. FORT D=160mm Z=10 (20x16)

CONICAL CLUTCH ad. FORT TIGROTTO FOR 2-STROKE ENGINES H=83mm Z=8 (15x12) CONICAL ATTACHMENT 17/13

CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12) CONICAL ATTACHMENT 17/13 FOR MIXED ENGINES.

CLUTCH DISCS WITH PARASTRAPPI ad. VALPADANA LANDINI D=220mm Z=16mm (30X27)

SLEEVE REGISPINTA ad. GOLDONI F&M AND MISCELLANEOUS D=48mm d=24mm

CLUTCH BELL ad. PASBO G51 G62

CLUTCH DISC ad. SEP 125 D=88mm Z=15 27x25

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH SLEEVE ad. BERTOLINI D=57mm d=27mm

MULTIDISCO CLUTCH PLATE D=102mm D=45mm

SPACER FOR MULTIDISC CLUTCHES

SMOOTH DISC FOR MULTIPLATE CLUTCH

BEARING CAP FOR BEVEL CLUTCHES 17X40X12

TAPER AND MULTIDISC CLUTCH BEARING CAP FOR BEARING 6004 2RS

BROACHED HUB FOR Z=8 (15X12) BEVEL CLUTCH MODIFICATIONS

HUB FOR CLUTCH DISC Z=6 (21X25)

MULTISCO CLUTCH BEARING CARRIER PLATE FOR 6004 2RS BEARING

STEEL CLUTCH CONE ad. BCS Z=8 (15X12)

MULTIDISCO CLUTCH BELL H=70mm D=23mm

CONICAL CLUTCH SPRING

MONODISCO CLUTCH ad. GOLDONS D=110mm

BIDISK CLUTCH ad. GOLDONI D=110mm Z=8

CLUTCH WIRE DIAMETER 3x2000 PACK 10 PIECES

CLUTCH DISCS WITH PAD SEAL ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIGINAL REF. 6300038

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=180mm

SPINGIDISCO DIAFRAM CLUTCH ad. BERTOLINI AND VARIOUS BRANDS D=160mm

CLUTCH DISC ad. PASQUALI D=212mm Z=10 (29x23)

DIAFRAM SPIDER CLUTCH ad. PASQUALI 906/931/950/945 D=180mm

DIAFRAM SPINGING CLUTCH ad. PASQUALI 950/958 D=190mm

MULTIDISCO clutch ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (14x11) D=102mm

CONICAL CLUTCH ad. ADRIATIC DIESEL H=92mm Z=6 (14X11) D=23mm

CONICAL CLUTCH FORT EUROGARDEN HEIGHT 84mm TEETH 8 (15X12) DIAMETER 23mm

FORT TIGROTTO CONICAL CLUTCH ad. PASQUALI DIESEL H=69mm Z=8 (15X12) D=23mm

DIAFRAM SPINGIDISCO clutch ad. FM R4 D=160mm

STEEL CLUTCH CONE ad. GOLDONI MONDIAL Z=8 REF. ORIG. 200973

CLUTCH BELL ad. GOLDONI

COMPONENTS FOR CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

CLUTCH WIRE D=1.9 x 200 PACKAGE 10 PIECES

CLUTCH WIRE D=2.5x200 MOTOCULTIVATOR PACKAGE 10 PIECES

CLUTCH BELL 4 HOLES DIESEL CONICAL ATTACHMENT D=23mm

CLUTCH DISCS WITH PARASTRAPPI ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC D=160mm Z=20 (17X15)

CLUTCH DISC D=160mm Z=20 (16X14)

CLUTCH DISC D=140mm Z=10 (26X21)

GRIFO EXTRA CLUTCH DISC D=144mm Z=10 (26x21)

CLUTCH DISC ad. BCS BARBIERI GOLDONI D=159mm Z=10 (19X15)

CLUTCH DISC ad. AGRIA 1900/3800/2800 HATZ E 780 D=181 Z=14 (25X22)

BEARING ad. BENASSI BARBIERI BRUMI FORT D=49mm D=24mm

TERMINAL DISC ad. F&M D7 D=108mm Z=8

CLUTCH DISC ad. PASQUALI 904 D=160mm Z=10 29X24mm

CLUTCH RING 4 HOLES ad. CRICKET 11,000 AND VARIOUS

CLUTCH DISC ad. RANDI ADRIATICA TRATTORINO 845 D=216mm Z=20 (23X20)

CLUTCH DISC ad. RANDI ADRIATICA 2500/3000/3500 D=160mm Z=10 (19X16)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISCS WITH PARASTRAPPI ad. BARBIERI LEOPARD FB 1400 S. SPECIAL D=157mm Z=10 (19X15)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=132mm Z=15 (24X21)

LOW HUB CLUTCH DISC ad. CASORZO CU7 D=110mm Z=6 (30X26)

HIGH MOTION CLUTCH DISC ad. CASORZO CU6 D=110mm Z=6 (30X26)

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I125/150 D=88/91mm

EXPANSION CLUTCH ad. MECC. BENASSI MINARELLI I80/90 D=81mm

SPINGIDISCO LEVER CLUTCH ad. GOLDONI SUPER UNIVERSAL D=216mm

CLUTCH DISC ad. TRATT.FURIA-FB3500 4MR D=216mm Z=13 (23X19)

CLUTCH LEVER COVER ad. SUPER SPECIAL GOLDONI

CLUTCH FORK ad. SUPER SPECIAL GOLDONI

CLUTCH SPRING ad. MONDIAL GOLDONI REF. ORIG. 200998

CLUTCH DISC ad. NIBBI BRUNO G119S-G219S D=216mm Z=15mm (24X21)

CLUTCH SLEEVE ad. PASQUALI D=67mm d=35mm

CLUTCH SLEEVE ad. F&M L300 D=50mm d=22mm

CLUTCH SLEEVE ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=69mm d=32mm REF. ORIG. 6300023

CLUTCH SLEEVE ad. PASQUALI AND VARIOUS MODELS D=82mm d=33mm

LEVER CLUTCH 9 SPRINGS SPINGIDISCO ad. PASQUALI 950/958 D=190m

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 950/958 D=190mm

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 906/931/950/945 D=185mm

CLUTCH REVISION KIT ad. GOLDONI EXPORT NIBBI FERRARI

SPINGIDISCO LEVER CLUTCH ad. GOLDONI EXPORT NIBBI FERRARI VALPADANA D=184mm REF. ORIG. 2020010

SPINGIDISCO LEVER CLUTCH ad. PASQUALI 917/934 D=160mm

SPINGIDISCO LEVER CLUTCH ad. FERRARI D=160mm

SPINGIDISCO LEVER CLUTCH ad. GOLDONS D=160mm

SPINGIDISCO LEVER CLUTCH ad. F&M L300 D=160mm

CLUTCH REVISION KIT ad. CRICKET 9000R MAB AND VARIOUS BRANDS

SPINGIDISCO LEVER CLUTCH ad. GRILLO 9000R MIRA LAMPACRESCIA FERRARI MAB AND VARIOUS BRANDS D=140mm

DIAFRAM CLUTCH SPINGIDISCO ad. GRILLE 131 D=160mm

SPINGIDISCO LEVER CLUTCH ad. AGRIA D=160mm

LAMELLAR CLUTCH ad. BRUMI SIMPLEX MAG BARBIERI GAZELLE Z=8 (15X12)

LAMELLAR CLUTCH ad. F&M R5 Z=9 (17x14)

MULTIDISC clutch H=71mm Z=8 (15X12) D=102mm

MULTIDISCO CLUTCH ad. ADRIATICA HP12 BENASSI BL195 H=91mm Z=6 (14X11) D=102mm

MULTIDISCO CLUTCH ad. SEP125 BENASSI N.T. H=88mm Z=8

MULTIDISCO CLUTCH ad. SEP GRILLO FERRARI VALPADANA H=99mm Z=8 (15X12) D=102mm

MULTIDISCO clutch ad. GOLDONI MONDIAL

CONICAL CLUTCH ad. F&M R5 DIESEL H=85mm Z=9 (17x14)

CYLINDRICAL CLUTCH PETROL ENGINE ad. HONDA HITCH CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS H=98mm Z=8 (15X12)

DIESEL ENGINE CONICAL CLUTCH ad. CRICKET 11000/12000 FERRARI 34/71 MECC. BENASSI RL300 MAB ADRIATICA BCS DIESEL H=98mm Z=8 (15X12)

Clutch BIDISCO ad. FORT BENASSI FERRARI CARRARO MAG BERTOLINI BARBIERI F&M D=110mm Z=8

MONODISCO CLUTCH ad. FORT BENASSI FERRARI MAG BERTOLINI BARBIERI F&M D=110mm

CLUTCH DISC ad. SEP 125 D=88x11.5mm Z=15

CLUTCH DISC ad. RANDI ADRIATICA Z=42

CLUTCH DISC ad. M.Gi.Bi. D=120mm Z=35 (73X66)

CLUTCH DISC ad. GOLDONI FERRARI VALPADANA MAG FORT BENASSI D=110mm Z=8 (15x12)

CLUTCH DISC ad. OLD BARBIERI TYPE CONDOR FORT D=110mm d=32mm

CLUTCH DISC ad. MAG BRUMI FORT D=87 Z=8 (15x12)

CLUTCH DISC ad. F&M R5 D=94m Z=9 (17x15)

MONODISCO/BIDISCO CLUTCH DISCS ad. BRUMI SIMPLEX FORT D=94m Z=8 (15X13)

CLUTCH DISC ad. MAB T4 ADRIATIC TIGROTTO D=85mm Z=6

CLUTCH DISC ad. SEP 70/125 D=83x5mm Z=15 (28x24)

CLUTCH DISC 1.5mm ad. MAB T4 ADRIATICA TIGROTTO

CLUTCH DISC ad. VALPADANA SEP 140 130 2nd SERIES D=122mm Z=15 (28x24)

CLUTCH CUP SPRING ad. RANDI ADRIATIC

CLUTCH DISC DISC DISC ad. MAB T4 ADRIATICA

CLUTCH DISK SPRING ad. MAB T4 ADRIATICA

CLUTCH DISC ad. VALPADANA AGRIA 2700 3800 D=216mm Z=10 (22X18)

CLUTCH DISC ad. PASQUALI 950/958/990 D=190mm Z=10 (29X23)

CLUTCH DISC ad. NIBBI BRUNO G119/219/520/521 D=184mm Z=15 (24x20)

CLUTCH DISCS WITH PAD SEALS ad. KUBOTA L5000-B6000 D=184mm Z=14 (20X18)

CLUTCH DISC ad. GOLDONI EXPORT 518/521/718/719 D=184mm Z=10 (19X15)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI MC58 MT65/60 D=184mm Z=10 (29X23)

CLUTCH DISCS WITH SPINDLE PADS ad. KUBOTA L1500/3000/5000 D=184mm Z=10 (26X20)

CLUTCH DISC ad. LOMBARDINI LDA80/96 VALPADANA VMC18 PGS D=184mm Z=10 (23X18)

CLUTCH DISC ad. BERTOLINI 320/330 D=180mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 931/937/945/946 D=180mm Z=10 (29X23)

CLUTCH DISC ad. CARRARO FRONT. SUPER TIGRE 620 635 D=181mm Z=10 (22x18)

CLUTCH DISC WITH PARASTRAPPI ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=182mm Z=20 (23x20)

CLUTCH DISC ad. FERRARI 74/75/76/94/95 ADRIATICA MASTERMAC BERTOLINI YABE 421/ 424/432 D=181mm Z=20 (23x20)

CLUTCH DISC ad. PASQUALI D=181mm Z=10 (29X23)

CLUTCH DISC ad. BERTOLINI YABE MOWER 124/125/126 D=177mm Z=10 (26x21)

CLUTCH DISCS WITH PARTS ad. BERTOLINI YABE MOTOCOLTIVATOR 310S/310T/510 ERREPPI TRANSPORTER MOTOAGRICOLA D=160mm Z=20 (23x20)

CLUTCH DISC ad. BERTOLINI 318 FERRARI 36 72 800 SERIES 12 72T M.GI.BI. ROTECO HP 10/12/ 14 D=160mm Z=20 (17X15)

CLUTCH DISC ad. BERTOLINI YABE MOTOCOLTIVATOR 310/324 D=160mm Z=13 (22X19)

CLUTCH DISC ad. PASQUALI 917/921/922/923/924/933/934 F&M MATRAS L300 D=160mm Z=10 (22x19)

CLUTCH DISC ad. MOTOCOLTIVATOR GRILLE 131 D=160mm Z=6 (16x13)

CLUTCH DISC ad. ADRIATIC MINIMEC SUPERMEC D=155mm Z=20 (17X15)

CLUTCH DISC ad. VALPADANA VMC14 MAB BONORI TALPA TRACTOR 4WD D=154mm Z=6 (17X14)

CLUTCH DISC ad. AEBI AM41 D=155mm Z=10 (23X18)

CLUTCH DISC ad. MOTOZAPPA CASORZO SU4 VIGNETO D=145mm Z=10 (26X21)

CLUTCH DISC ad. BERTOLINI 315/341/345 ADRIATICA MINIMEC SUPER FERRARI MC64/68/72 D=140mm Z=20 (17x15)

CLUTCH DISC ad. LAMPACRESCIA TYPE M D=140mm Z=6 (20X16)

CLUTCH DISC ad. FERRARI 72 MIRA HP 10/12/14 D=140mm Z=6 (17X14)

CLUTCH DISC ad. AGRIA 8000 GRILLO 9000 9000R D=139mm Z=6 (17X14)

CLUTCH DISC ad. NIBBI BRUNO TRACTOR 519 D=138mm Z=15 (24X21)

CLUTCH DISC ad. BERTOLINI SERIES 300 D=80mm Z=12 (20X17)

CLUTCH DISC ad. GOLDONI UNIVERSAL 233/236 VALPADANA D=216mm Z=10 (22X18) ORIG. REF. 6300038

Catalogo Generale

Title

Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.

Necessary

Always Enabled

Necessary cookies are absolutely essential for the website to function properly. These cookies ensure basic functionalities and security features of the website, anonymously.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics		This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional		The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary		This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the "Necessary" category.
cookielawinfo-checkbox-others		This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance		This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the "Performance" category.
viewed_cookie_policy		The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

document.addEventListener('DOMContentLoaded', function() { const field = document.querySelector('.allow-special-chars input'); if (field) { field.addEventListener('input', function() { // Accetta qualsiasi carattere this.value = this.value; }); } });